{"title":"Compression router bits","description":"","products":[{"product_id":"fresa-de-compresion-para-nesting-acabado-vhm-z2-2-d8-i35-l80-s8-rh-platinum","title":"Compression router bit for nesting Finishing VHM Z2+2 D8 I35 L80 S8 RH Platinum","description":"\u003ch2\u003eFinishing spiral mill HM (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX90.08.035.080.08PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral mill made of a special grade of sintered carbide dedicated to nesting from the \u003cstrong\u003eX90\u003c\/strong\u003e series, with a compression construction (positive-negative) and a factory \u003cstrong\u003ePlatinum\u003c\/strong\u003e coating. The tool is designed for high-performance cutting, nesting technology cutting, as well as edge gluing and straightening on CNC machining centres. Two counter-rotating spiral directions press the material against the core of the board from both sides, eliminating the risk of tear-out on the upper and lower edges. The ground shank in class H6 accuracy eliminates radial runout, protecting the drive system and ensuring high stability of the process.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The counter-positioning of the blades pushes the chips down from the upper edge and up from the lower edge, pressing the laminate against the core and guaranteeing clean edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSintered carbide dedicated to nesting (HM (coated)):\u003c\/strong\u003e A selected grade of carbide with enhanced impact resistance and rigidity prevents micro-chipping during continuous processing of boards.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePlatinum protective coating:\u003c\/strong\u003e An advanced PVD coating with a thickness of 1–4 µm and a hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces the adhesion of the machined material and significantly extends the tool's life in difficult materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank eliminates the risk of slipping in the holder and prevents wear of the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing compliant with ISO standards reduces vibrations and quietens operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, efficient cutting in nesting technology, as well as edge gluing and straightening on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, soft and hard solid wood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444625252692,"sku":"X90.08.035.080.08PR","price":36.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X90.08.035.080.08PR_X90.08.035.080.08PR-108_95bca0e4-afe5-4ff3-aafa-319fad08bba1.jpg?v=1793969501"},{"product_id":"fresa-de-compresion-para-nesting-desbaste-vhm-z2-2-d16-i52-l110-s16-rh-platinum","title":"Compression router bit for nesting Roughing VHM Z2+2 D16 I52 L110 S16 RH Platinum","description":"\u003ch2\u003eHM Spiral Roughing End Mill (Coated) Compression for Nesting Platinum from the X90 Series – uncompromising durability and clean edges\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX90.16.052.110.16PRz\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made of a special grade of sintered carbide dedicated to nesting from the \u003cstrong\u003eX90\u003c\/strong\u003e series, with a compression (positive-negative) design and a factory \u003cstrong\u003ePlatinum\u003c\/strong\u003e coating. The tool is designed for high-efficiency cutting, nesting technology machining, as well as edge jointing and finishing on CNC machining centres. Two counter-rotating spiral directions press the material against the core of the board from both sides, eliminating the risk of tearing on the top and bottom edges. A ground shank in class H6 eliminates radial runout, protecting the drive system and ensuring high stability of the process.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The counter-rotating arrangement of the blades pushes the chip down from the upper edge and up from the lower edge, pressing the laminate against the core and guaranteeing clean edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSintered carbide dedicated to nesting (HM (coated)):\u003c\/strong\u003e A selected grade of carbide with increased impact toughness and stiffness prevents micro-chipping during continuous processing of panels.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePlatinum protective coating:\u003c\/strong\u003e An advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces sticking of the material being processed and significantly extends the tool's life in difficult materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank eliminates the risk of slipping in the holder and prevents wear of the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing compliant with ISO standards reduces vibrations and quiets operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, efficient nesting technology machining, as well as edge jointing and finishing on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, soft and hard solid wood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444626137428,"sku":"X90.16.052.110.16PRz","price":118.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X90.16.052.110.16PRz_X90.16.052.110.16PRZ-107_36889bc5-1742-43b0-835a-c84803ae9490.jpg?v=1793969512"},{"product_id":"fresa-de-compresion-para-nesting-nexcut-vhm-z2-6-d6-i22-l70-s6-rh","title":"Compression nesting router bit NEXCUT VHM Z2+6 D6 I22 L70 S6 RH","description":"\u003ch2\u003eVHM Compression Spiral Mill for Nesting X99 NEXCUT with PLATINIUM Coating – Awarded Precision and Outstanding Durability\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX99.06.022.070.06PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe NEXCUT X99 compression milling cutter from ITA TOOLS is the official winner of the Gold Medal MTP at the 2026 International Fair of Machines, Tools and Components for the Wood and Furniture Industry DREMA. This industrial spiral milling cutter made from a special grade of sintered carbide is designed for nesting, part of the X99 NEXCUT series with compression geometry (positive-negative) featuring an innovative PLATINIUM protective coating. The tool is designed for maximum efficiency during cutting, nesting technology, as well as edge lipping and alignment on CNC machining centres. The advanced blade arrangement Z#liczba_ostrzy_z with finishing geometry combined with counter-rotating screw lines guarantees an ideally smooth surface and clean edges without chipping on both the upper and lower surfaces of the workpiece. The ground shank with an accuracy class of H6 effectively eliminates radial runout, protecting the drive system and preventing vibration.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGold Medal Winner DREMA 2026:\u003c\/strong\u003e Officially recognised with the prestigious MTP award for innovation, outstanding machining quality and advanced cutting technology in the furniture industry.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Z2+6 (NEXCUT) design:\u003c\/strong\u003e The special configuration of 2+6 spiral blades ensures excellent working culture, perfect edge finishing and very high feed rates while maintaining perfect cutting quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The counter-rotating twist of the blades simultaneously pushes the chip down from the upper edge and up from the lower edge, pressing the laminate against the board core and eliminating the risk of tearing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecial grade carbide for nesting:\u003c\/strong\u003e The use of selected monolith carbide with increased stiffness and impact resistance protects the blades from micro-chipping during continuous board processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced two-layer PLATINIUM coating (.PR):\u003c\/strong\u003e An innovative PVD coating with an iridescent colour (gold-purple-blue), thickness of 1–4 µm and microhardness of 3000 HV (HV 0.05). The combination of hard coating with tribological properties allows for a very low friction coefficient (0.02), drastically reduces material adhesion to the tool and significantly extends blade life.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing cutting geometry:\u003c\/strong\u003e Precisely ground edges guarantee excellent surface quality of edges without the need for additional processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees stability and quiet operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Scope:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for efficient cutting operations, nesting technology processing, as well as edge lipping and alignment on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt works perfectly with materials such as: solid soft and hard wood, raw and laminated MDF board, raw and laminated particle board, raw and laminated plywood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444627743060,"sku":"X99.06.022.070.06PR","price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X99.06.022.070.06PR_X99.06.022.070.06PR-107_2bfff773-fdff-4357-9655-797d1961295d.jpg?v=1793969517"},{"product_id":"fresa-de-compresion-para-nesting-acabado-vhm-z2-2-d12-i25-l80-s12-rh-platinum","title":"Compression router bit for nesting Finishing VHM Z2+2 D12 I25 L80 S12 RH Platinum","description":"\u003ch2\u003eFinishing spiral cutter HM (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX90.12.025.080.12PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral cutter made of a special grade of cemented carbide dedicated to nesting from the \u003cstrong\u003eX90\u003c\/strong\u003e series, with a compression (positive-negative) design and factory \u003cstrong\u003ePlatinum\u003c\/strong\u003e coating. The tool is designed for high-performance cutting operations, nesting technology, as well as edge jointing and alignment on CNC machining centres. Two opposing spiral twist directions press the material against the core of the board from both sides, eliminating the risk of tear-outs on the upper and lower edges. The ground shank in accuracy class H6 minimizes radial run-out, protecting the drive system and ensuring high stability of the process.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The opposing arrangement of the blades pushes chips down from the upper edge and up from the lower edge, pressing the laminate to the core and guaranteeing clean edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCemented carbide dedicated to nesting (HM (coated)):\u003c\/strong\u003e A selected grade of carbide with increased impact resistance and rigidity prevents micro-chipping during continuous board processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePlatinum protective coating:\u003c\/strong\u003e Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces material sticking and significantly extends tool life in difficult materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface eliminates the risk of slipping in the chuck and prevents wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards reduces vibrations and muffles operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, efficient nesting technology, as well as edge jointing and alignment on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated particle board, raw and laminated plywood, soft and hard solid wood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444640751956,"sku":"X90.12.025.080.12PR","price":64.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X90.12.025.080.12PR_X90.12.025.080.12PR-102_26cd05eb-da02-404b-95fc-62ff157675d3.jpg?v=1793969509"},{"product_id":"fresa-de-compresion-para-nesting-acabado-vhm-z2-2-d10-i22-l70-s10-rh-platinum","title":"Compression router bit for nesting Finishing VHM Z2+2 D10 I22 L70 S10 RH Platinum","description":"\u003ch2\u003eEnd mill HM (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX90.10.022.070.10PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial end mill made from a special grade of sintered carbide, dedicated to nesting from the \u003cstrong\u003eX90\u003c\/strong\u003e series, with a compression (positive-negative) design and a factory \u003cstrong\u003ePlatinum\u003c\/strong\u003e coating. The tool is designed for high-efficiency cutting processing, nesting technology cutting, as well as edging and trimming operations on CNC machining centres. Two opposing spiral twist directions push the material against the core of the board from both sides, eliminating the risk of tearing on the upper and lower edges. Ground shank in H6 accuracy class eliminates radial runout, protecting the drive system and ensuring high process stability.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The counter-rotating arrangement of the blades pushes the chips down from the top edge and up from the bottom, pressing the laminate to the core and guaranteeing clean edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSintered carbide dedicated to nesting (HM (coated)):\u003c\/strong\u003e Selected grade of carbide with increased toughness and rigidity prevents micro-chipping during continuous board processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eProtective Platinum coating:\u003c\/strong\u003e Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces sticking of the material being machined and significantly extends tool life in difficult materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface eliminates the risk of slipping in the chuck and prevents wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 class:\u003c\/strong\u003e Balancing according to ISO standards reduces vibrations and dampens operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, efficient nesting technology cutting, as well as edging and trimming operations on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, soft and hardwood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444641243476,"sku":"X90.10.022.070.10PR","price":42.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X90.10.022.070.10PR_X90.10.022.070.10PR-112_59de1293-085a-4c82-8731-39b9423ff276.jpg?v=1793969507"},{"product_id":"fresa-diamantada-pcd-z3-1-d10-i22-l70-s12-h2-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D10 I22 L70 S12 H2,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD diamond mill three-blade DTE DENSIMET® – for nesting, finishing and leveling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.10.022.12.0DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond mill from the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, cutting, contour milling and leveling of surfaces on CNC centres and overhead spindle milling machines. The design of the tool consists of three solid blades made of polycrystalline diamond (\u003cb\u003eH2.5)\u003c\/b\u003e arranged on three spirals, complemented by a diamond cutting plate that allows for effective and stable axial penetration into the material. The body made of DENSIMET® material (heavy alloy with extremely high density and vibration-damping capability) provides exceptional rigidity, vibration reduction and excellent edge finish standards.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative body based on DENSIMET®:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during cutting, resulting in longer diamond tool life and ideal workpiece surface quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGeometry of blades Z3+1 in positive or negative variant:\u003c\/strong\u003e Three solid cutting edges of polycrystalline diamond on three spirals allow for adjustment of the proper chip ejection direction (positive\/negative) depending on the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD diamond cutting plate:\u003c\/strong\u003e The tool front equipped with a PCD plate facilitates smooth, fluid and stable penetration of the mill in the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of DIA blades are finished directly with a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip channels prevents workpiece adhesion and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high-class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the applied diamond blade: a plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling and leveling (planning) operations.\u003c\/p\u003e\u003cp\u003eIt works perfectly in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651794772,"sku":"DTE.10.022.12.0DR","price":189.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.10.022.12.0DR_DTE.10.022.12.0DR-112.jpg?v=1791281560"},{"product_id":"fresa-diamantada-pcd-z3-1-d12-i20-l69-s12-h3-rh-pos-neg","title":"PCD diamond router bit Z3+1 D12 I20 L69 S12 H3 RH pos.\/neg.","description":"\u003ch2\u003eThree-blade PCD diamond cutter DTE DENSIMET® – for nesting, finishing machining, and surface levelling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.12.020.12.0DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, cutting, contour milling, and surface levelling on CNC centres and overhead spindle milling machines. The tool's construction features three solid blades made of polycrystalline diamond (\u003cb\u003eH3)\u003c\/b\u003e arranged on three spirals, complemented by a diamond front plate that allows for efficient and stable axial plunging into the material. The body made of DENSIMET® (a heavy alloy with extremely high density and vibration dampening capability) ensures outstanding rigidity, vibration reduction, and an excellent edge finishing standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® body:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during cutting, translating to longer durability of the diamond blades and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+1 blade geometry in positive or negative variant:\u003c\/strong\u003e Three solid cutting edges of polycrystalline diamond on three spirals allow for matching the correct chip removal direction (positive\/negative) according to the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's front equipped with a PCD plate facilitates smooth, effortless, and stable plunging of the cutter in the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii in the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from microchipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) minimises noise and reduces vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRenewability:\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and levelling (planning) operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated MDF boards, raw and laminated particle boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444652220756,"sku":"DTE.12.020.12.0DR","price":189.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.12.020.12.0DR_DTE.12.020.12.0DR-106.jpg?v=1791281563"},{"product_id":"fresa-diamantada-pcd-z3-1-d12-i22-l70-s12-h2-5-rh-positivo","title":"PCD diamond router bit Z3+1 D12 I22 L70 S12 H2,5 RH positive","description":"\u003ch2\u003eThree-blade PCD diamond cutter DTE DENSIMET® – for nesting, finishing and flattening\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.12.022.12.2DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, contour cutting, milling and flattening on CNC machines and spindle milling machines. The tool's construction consists of three full blades made of polycrystalline diamond (\u003cb\u003eH2.5)\u003c\/b\u003e arranged on three spirals, complemented by a diamond front plate that allows for smooth and stable axial immersion into the material. The body made from DENSIMET® material (heavy alloy with exceptionally high density and vibration-damping capability) ensures outstanding rigidity, vibration reduction and excellent edge finish quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® based body:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during machining, resulting in longer tool life for diamond blades and ideal surface quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive or negative Z3+1 blade geometry:\u003c\/strong\u003e Three full cutting edges made of polycrystalline diamond on three spirals allow for the appropriate chip ejection direction (positive\/negative) depending on the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool face equipped with a PCD plate facilitates smooth, fluid and stable penetration of the cutter into the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, allowing edge radii as small as \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed backside of the PCD diamond plate combined with spacious chip channels prevents material build-up and improves rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding possibility:\u003c\/strong\u003e depending on the height of the diamond blade applied: a plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling and flattening (planing) operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated particle board, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444652646740,"sku":"DTE.12.022.12.2DR","price":193.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.12.022.12.2DR_DTE.12.022.12.2DR-102.jpg?v=1791281565"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i25-l86-s16-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I25 L86 S16 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Edge DTE.TURBO – for finishing, formatting, and mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.025.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC centres and overhead spindle milling machines. The tool's construction consists of three solid blades made of polycrystalline diamond\u003cb\u003e H4 and\u003c\/b\u003e\u0026nbsp;a diamond front insert that allows for efficient and stable axial penetration into the material. The body, made from selected stainless steel, offers high stiffness and resistance to thermal and mechanical loads. The ground shank in the precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finishing standard. The cutter is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The three cutting edges made of polycrystalline diamond mounted on a stainless steel body ensure high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front insert:\u003c\/strong\u003e The tool's front equipped with a PCD insert facilitates effortless, smooth, and stable penetration of the cutter along the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting face free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and rake face:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with deep chip channels prevents workpiece adhesion and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the diamond blade used: the insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, the insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables regrinding up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for regrinding up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while the inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable regrinding up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling (formatting), and mortising.\u003c\/p\u003e\u003cp\u003eIt works excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated particle board, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444653072724,"sku":"DTE.16.025.16.0SR","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.025.16.0SR_DTE.16.025.16.0SR-104.jpg?v=1791281566"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i25-l85-s16-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I25 L85 S16 H4 RH pos.\/neg.","description":"\u003ch2\u003eThree-Blade PCD Diamond Cutter DTE TURBO NESTING – for nesting, finishing processing, and formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.025.16.NSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE TURBO NESTING\u003c\/strong\u003e series is designed for efficient nesting, cutting, and finishing processing on CNC centres and overhead spindle milling machines. The tool's structure comprises three full blades made of polycrystalline diamond \u003cb\u003eH4\u003c\/b\u003e arranged on three spirals, and a diamond front plate that allows stable axial penetration into the material. The body, made of selected stainless steel, offers high rigidity and resistance to thermal and mechanical loads. The ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle's bearing system and ensuring an excellent edge finish standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThree full blades on a stainless steel body:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body ensures high cutting efficiency, high feed rates, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The front of the tool equipped with a PCD plate facilitates smooth, easy, and stable downward movement of the cutter along the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii in the range of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip channels prevents chip adhesion and enhances rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static and dynamic balancing in the strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and diminishes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e Depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 re-sharpenings\u003c\/strong\u003e, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e permits sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF boards, raw and laminated particle boards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444653465940,"sku":"DTE.16.025.16.NSR","price":141.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.025.16.NSR_DTE.16.025.16.NSR-104.jpg?v=1791281571"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i35-l97-s16-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I35 L97 S16 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD three-wing diamond cutter DTE.TURBO – for finishing, formatting and groove machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.035.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting and finishing on CNC machines and overhead spindle milling machines. The tool's construction features three solid blades made of polycrystalline diamond\u003cb\u003e H4 and\u003c\/b\u003e\u0026nbsp;a diamond cutting insert that enables efficient and stable axial immersion into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finishing standard. The cutter is available in right-hand and left-hand versions.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDiamond PCD cutting insert:\u003c\/strong\u003e The tool's tip equipped with a PCD insert facilitates free, smooth and stable engagement of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing edge radii to be achieved at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-nicks.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents the sticking of machined material and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and mitigates vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling (formatting) and groove machining operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444653990228,"sku":"DTE.16.035.16.0SR","price":236.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.035.16.0SR_DTE.16.035.16.0SR_N-112.jpg?v=1791281571"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i40-l93-s16-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I40 L93 S16 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Flute DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.040.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC machining centres and overhead milling machines. The tool's structure consists of three full blades made of polycrystalline diamond\u003cb\u003e H4 and\u003c\/b\u003e a diamond tip that allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finish standard. The cutter is offered in both right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Diamond Tip:\u003c\/strong\u003e The tool's face equipped with a PCD tip facilitates smooth, free, and stable axial penetration of the cutter in the Z axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Processing (Ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Angle:\u003c\/strong\u003e The smooth rear part of the PCD diamond tip combined with ample chip flutes prevents material buildup and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the collet and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e Depending on the height of the diamond tip used: tip \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, tip \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for \u003cstrong\u003eup to 2–3 regrinds\u003c\/strong\u003e, options \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for \u003cstrong\u003eup to 3–4 regrinds\u003c\/strong\u003e, while tips \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for \u003cstrong\u003eup to 4–6 regrinds\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling (formatting), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444655300948,"sku":"DTE.16.040.16.0SR","price":267.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.040.16.0SR_DTE.16.040.16.0SR-102.jpg?v=1791281574"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i45-l102-s16-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I45 L102 S16 H4,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-edge PCD Diamond Mill DTE.TURBO – for finishing, formatting and profiling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.045.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond mill from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC machines and overhead milling machines. The tool's structure consists of three solid edges made of polycrystalline diamond \u003cb\u003eH4.5 and\u003c\/b\u003e a diamond front plate that allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank, manufactured to a precise tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e, eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finishing standard. The mill is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's front, equipped with a PCD plate, facilitates free, smooth, and stable insertion of the mill in the Z axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip grooves prevents material sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a tight class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) mitigates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the applied diamond edge: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and field of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, contour milling (formatting), and profiling.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444655530324,"sku":"DTE.16.045.16.0SR","price":315.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.045.16.0SR_DTE.16.045.16.0SR-106.jpg?v=1791281577"},{"product_id":"fresa-diamantada-pcd-z3-1-d18-i25-l87-s20-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D18 I25 L87 S20 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD diamond milling cutter three-flute DTE.TURBO – for finishing, formatting and mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.18.025.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC centres and overhead milling machines. The tool features three full blades made of polycrystalline diamond\u003cb\u003e H4 and\u003c\/b\u003e\u0026nbsp;a diamond front plate that allows for efficient and stable axial penetration into the material. The body, made from selected stainless steel, offers high rigidity and resistance to thermal and mechanical loads. The ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent standard of edge finishing. The cutter is available in both right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting performance, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's front equipped with a PCD plate facilitates smooth, fluid, and stable penetration of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting edge zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents debris from sticking and improves quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the applied diamond blade: the blade \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2\u003c\/strong\u003e sharpenings, the blade \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, whilst blades \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling (formatting), and mortising.\u003c\/p\u003e\u003cp\u003eIt performs excellently when processing materials such as: raw and laminated MDF board, raw and laminated particleboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444655989076,"sku":"DTE.18.025.20.0SR","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.18.025.20.0SR_DTE.18.025.20.0SR-112.jpg?v=1791281580"},{"product_id":"fresa-diamantada-pcd-z3-1-d18-i35-l98-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D18 I35 L98 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-Edge PCD Diamond Cutting Tool DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.18.035.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC centres and overhead milling machines. The tool's structure consists of three full edges made from polycrystalline diamond \u003cb\u003eH4.5 and\u003c\/b\u003e a diamond face plate, which allows for efficient and stable axial penetration into the material. The body made from selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial run-out, protecting the spindle's bearing system and guaranteeing an excellent edge finishing standard. The cutter is available in both right and left-hand variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made from polycrystalline diamond mounted on a stainless steel body ensures high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD face plate:\u003c\/strong\u003e The tool face equipped with a PCD plate facilitates smooth and stable axial penetration in the Z axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip channels prevents material adhesion and facilitates fast removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the tool holder:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from spinning in the holder and eliminates the risk of wearing out the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and lowers vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables maximum \u003cstrong\u003e2–3 sharpenings\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 sharpenings\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 sharpenings\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and area of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444661100884,"sku":"DTE.18.035.20.0SR","price":236.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.18.035.20.0SR_DTE.18.035.20.0SR-102.jpg?v=1791281582"},{"product_id":"fresa-diamantada-pcd-z3-1-d18-i45-l108-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D18 I45 L108 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD three-blade diamond cutter DTE.TURBO – for finishing, formatting and grooving work\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.18.045.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing work on CNC centres and overhead spindle milling machines. The tool design features three full edges made of H4,5 polycrystalline diamond and a diamond cutting plate that enables efficient and stable axial penetration into the material. The body made of selected stainless steel offers high stiffness and resistance to thermal and mechanical loads. The ground shank in the precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent standard of edge finishing. The cutter is available in both right-handed and left-handed versions.\u003c\/p\u003e\u003ch3\u003eDesign strengths and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high machining efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD cutting plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates free, smooth, and stable entry of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e Cutting edge profiles are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting face area:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with large chip channels prevents debris from sticking and facilitates rapid dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface has a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, preventing the cutter from rotating in the holder and eliminating the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond blade used: the plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e, the plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, the variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while the plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444661625172,"sku":"DTE.18.045.20.0SR","price":283.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.18.045.20.0SR_DTE.18.045.20.0SR-102.jpg?v=1791281585"},{"product_id":"fresa-diamantada-pcd-z3-1-d20-i45-l110-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D20 I45 L110 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-edge PCD diamond cutter DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.20.045.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC centres and overhead milling machines. The tool's construction consists of three full blades made of polycrystalline diamond\u003cb\u003e H4.5 and\u003c\/b\u003e\u0026nbsp;a diamond cutting insert, which enables efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finishing standard. The cutter is available in both right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean edges of the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD cutting insert:\u003c\/strong\u003e The tool's face equipped with a PCD insert facilitates smooth, fluid, and stable axial engagement of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, achieving edge radii of approximately \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes and leading edge area:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with voluminous chip channels prevents the sticking of chips and facilitates quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in an extremely strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimises vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration possibility:\u003c\/strong\u003e depending on the height of the diamond blade applied: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444661854548,"sku":"DTE.20.045.20.0SR","price":306.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.20.045.20.0SR_DTE.20.045.20.0SR-112.jpg?v=1794296946"},{"product_id":"fresa-diamantada-pcd-z3-1-d25-i25-l89-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D25 I25 L89 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Edge DTE.TURBO – for finishing, formatting and mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.25.025.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e\u0026nbsp;series is designed for high-performance formatting, cutting, and finishing operations on CNC machining centres and overhead milling machines. The tool's construction consists of three solid cutting edges made of polycrystalline diamond\u003cb\u003e H4.5 and\u003c\/b\u003e\u0026nbsp;a diamond face plate, which allows for efficient and stable axial immersion into the material. The body made of selected stainless steel offers high stiffness and resistance to thermal and mechanical loads. The ground shank with a precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle's bearing system and ensuring an excellent edge finish standard. The cutter is offered in right and left variants.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Face Plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates smooth, fluid, and stable immersion of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Treatment (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing edge radii down to \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Area:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip flutes prevents chip adhesion and enhances quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standards:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding Possibility:\u003c\/strong\u003e Depending on the height of the diamond blade used: the \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e plate allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, the \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e plate enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, the variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while the plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, peripheral milling (formatting), and mortising operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444662247764,"sku":"DTE.25.025.20.0SR","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.25.025.20.0SR_DTE.25.025.20.0SR-101.jpg?v=1794296946"},{"product_id":"fresa-diamantada-pcd-z3-1-d25-i45-l112-s20-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D25 I45 L112 S20 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond End Mill Three-Flute DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.25.045.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond end mill from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is intended for high-efficiency formatting, cutting, and finishing operations on CNC machines and overhead milling machines. The tool's design features three solid blades made of polycrystalline diamond \u003cb\u003eH4 and\u003c\/b\u003e a diamond front plate that allows for efficient and stable axial immersion into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent edge finish standard. The end mill is available in right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool head equipped with a PCD plate facilitates free, smooth, and stable immersion of the end mill in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge treatment (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents material buildup and enhances quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the end mill against rotation in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balance in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, peripheral milling (formatting), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as raw and laminated MDF boards, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444665065812,"sku":"DTE.25.045.20.0SR","price":306.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.25.045.20.0SR_DTE.25.045.20.0SR-109.jpg?v=1794296949"},{"product_id":"fresa-diamantada-pcd-z3-1-d25-i65-l131-s25-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D25 I65 L131 S25 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Three-Edge Diamond Cutter DTE.TURBO – for finishing, profiling, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.25.065.25.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter of the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance profiling, cutting, and finishing on CNC machining centres and overhead milling machines. The tool's construction features three solid polycrystalline diamond blades \u003cb\u003eH4 and\u003c\/b\u003e a diamond front plate that allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finishing standard. The cutter is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond fixed on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates free, smooth, and stable penetration of the cutter along the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smooth back part of the PCD diamond plate combined with capacious chip channels prevents workpiece adhesion and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in norm G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the high class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimises vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e Depending on the height of the applied diamond blade: the plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpenings\u003c\/strong\u003e, the plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling (profiling), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444668440916,"sku":"DTE.25.065.25.0SR","price":420.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.25.065.25.0SR_dte.25.065.25.0sr-103.jpg?v=1794296949"},{"product_id":"fresa-diamantada-pcd-z3-1-d12-i35-l85-s12-h2-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D12 I35 L85 S12 H2,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD three-edged diamond cutter DTE DENSIMET® – for nesting, finishing and flattening\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.12.035.12.0DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the DTE \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, cutting, contour milling and flattening surfaces on CNC centres and overhead spindle milling machines. The tool's structure consists of three solid cutting edges made of polycrystalline diamond (\u003cb\u003eH2.5\u003c\/b\u003e) arranged on three spirals, complemented by a diamond front plate that allows for efficient and stable axial penetration into the material. The body made from DENSIMET® (a heavy alloy with exceptionally high density and vibration-damping ability) ensures outstanding rigidity, vibration reduction, and excellent edge finishing standards.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® body:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during machining, resulting in longer durability of the diamond edges and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+1 knife geometry in positive or negative variant:\u003c\/strong\u003e Three solid cutting edges made of polycrystalline diamond on three spirals allow for adjusting the proper chip evacuation direction (positive\/negative) depending on the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's front, equipped with a PCD plate, facilitates free, smooth, and stable penetration of the cutter along the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge machining (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, which allows achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry area:\u003c\/strong\u003e The smooth rear part of the PCD diamond plate combined with spacious chip channels prevents material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within the G2.5 norm:\u003c\/strong\u003e Certified static-dynamic balancing in the strict class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding capability:\u003c\/strong\u003e depending on the height of the applied diamond blade: the plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, the plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables regrinding a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for regrinding a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for regrinding a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, contour milling and flattening (planning) operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444721721684,"sku":"DTE.12.035.12.0DR","price":230.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.12.035.12.0DR_DTE.12.035.12.0DR-106.jpg?v=1791281836"},{"product_id":"fresa-de-compresion-para-nesting-nexcut-vhm-z2-6-d12-i35-l80-s12-rh","title":"Compression nesting router bit NEXCUT VHM Z2+6 D12 I35 L80 S12 RH","description":"\u003ch2\u003eCompression spiral mill VHM for nesting X99 NEXCUT with PLATINIUM coating – award-winning precision and exceptional durability\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX99.12.035.080.12PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe NEXCUT X99 compression milling cutter from ITA TOOLS is the official winner of the Gold Medal MTP at the International Fair of Machines, Tools and Components for the Wood and Furniture Industry DREMA 2026. The industrial spiral mill is made from a special grade of sintered carbide designed for nesting with a compression geometry (positive-negative) and an innovative protective PLATINIUM coating. The tool is designed for maximum efficiency during cutting, nesting technology operations, as well as edge bonding and smoothing on CNC machining centres. The advanced blade arrangement Z#liczba_ostrzy_z with finishing geometry combined with opposing screw lines guarantees a perfectly smooth surface and clean edges without chipping on both the upper and lower surfaces of the workpiece board. The ground shank with an accuracy class of H6 effectively eliminates radial runout, protecting the drive system and preventing vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eWinner of the Gold Medal DREMA 2026:\u003c\/strong\u003e Officially recognised with the prestigious MTP award for innovation, outstanding machining quality, and advanced cutting technology in the furniture industry.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Z2+6 (NEXCUT) design:\u003c\/strong\u003e The special arrangement of 2+6 spiral blades ensures outstanding working culture, perfect edge finish, and very high feed rates while maintaining perfect cutting quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The opposing twist of the blades simultaneously pushes the chips from the upper edge downwards and from the lower edge upwards, pressing the laminate against the core of the board and eliminating the risk of tear-outs.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecial grade of carbide for nesting:\u003c\/strong\u003e The use of selected monolithic carbide with enhanced rigidity and impact resistance protects the blades from micro-chipping during continuous board processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced dual-layer PLATINIUM coating (.PR):\u003c\/strong\u003e An innovative PVD coating with an iridescent colour (gold-purple-blue), thickness of 1–4 µm, and micro-hardness of 3000 HV (HV 0.05). The combination of a hard layer with a tribological one allows for a very low coefficient of friction (0.02), drastically reduces material adhesion to the tool, and significantly extends the lifespan of the blades.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing cutting geometry:\u003c\/strong\u003e Precisely ground edges guarantee excellent edge surface quality without the need for additional processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures stability and quiet operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for efficient cutting operations, processing using nesting technology, as well as edge bonding and smoothing on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: soft and hard solid wood, raw and laminated MDF board, raw and laminated particle board, raw and laminated plywood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444751901012,"sku":"X99.12.035.080.12PR","price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X99.12.035.080.12PR_X99.12.035.080.12PR-111_33ad025c-6a7c-4587-806f-571584067f47.jpg?v=1794302448"},{"product_id":"fresa-diamantada-pcd-nesting-z3-3-d12-i21-l70-s12-h2-5-rh-pos-neg","title":"PCD diamond NESTING router bit Z3+3 D12 I21 L70 S12 H2,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-blade diamond milling cutter PCD DTM DENSIMET® – for nesting, formatting, and finishing processing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTM.12.021.12.1DRN\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cb\u003eDTM\u003c\/b\u003e\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for high-performance nesting, cutting, and finishing processing on CNC centres and overhead spindle milling machines. The advanced tool design consists of three full polycrystalline diamond blades arranged on six spirals, complemented by a diamond front plate that enables efficient and stable axial penetration into the material. The body made of DENSIMET® (heavy alloy with advanced vibration-damping capabilities) ensures high structural stiffness and vibration reduction during processing. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and guaranteeing an excellent edge finishing standard.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® based body:\u003c\/strong\u003e The use of heavy metals with high density precisely dampens vibrations during cutting, which translates into longer tool life and ideal quality of the processed surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+3 blade arrangement on six spirals (positive\/negative):\u003c\/strong\u003e Three full polycrystalline diamond blades arranged on six spirals in either positive or negative configuration guarantee an excellent edge finishing standard for the panel and the proper direction of chip ejection (upwards or downwards).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD diamond front plate:\u003c\/strong\u003e The tool's front equipped with a PCD plate facilitates smooth, fluid, and stable insertion of the cutter in the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The edges of the DIA blades are finished directly with a laser beam, achieving edge radii around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smooth back of the PCD diamond plate combined with capacious chip channels prevents chip adhesion and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within the G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated MDF boards, raw and laminated chipboards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444754325844,"sku":"DTM.12.021.12.1DRN","price":219.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTM.12.021.12.1DRN_DTM.12.021.12.1DRN-108.jpg?v=1791281940"},{"product_id":"fresa-diamantada-pcd-nesting-z3-3-d12-i24-l70-s12-h2-5-rh-negativo","title":"PCD diamond NESTING router bit Z3+3 D12 I24 L70 S12 H2,5 RH negative","description":"\u003ch2\u003eThree-blade diamond milling cutter PCD DTM DENSIMET® – for nesting, formatting and finishing machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTM.12.024.12.1DRN\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cb\u003eDTM\u003c\/b\u003e\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for high-performance nesting, cutting and finishing machining on CNC centres and overhead-spindle milling machines. The advanced design of the tool features three full blades made of polycrystalline diamond arranged on six spirals, complemented by a diamond cutting tip that enables efficient and stable axial penetration into the material. The body made of DENSIMET® (a heavy alloy with advanced vibration-damping capabilities) ensures high structural stiffness and reduces vibration during machining. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and guaranteeing an excellent standard of edge finish.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative body based on DENSIMET®:\u003c\/strong\u003e The use of heavy metals with high density precisely dampens vibrations during cutting, resulting in longer tool life and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+3 blade arrangement on six spirals (positive\/negative):\u003c\/strong\u003e Three full polycrystalline diamond blades arranged on six spirals in either a positive or negative configuration ensure an excellent standard of edge finish for the board and the appropriate direction for chip ejection (upward or downward).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD cutting tip:\u003c\/strong\u003e The tool’s face equipped with a PCD tip facilitates free, smooth and stable plunge cutting in the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser cutting edge processing (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving cutting edge radii of approximately \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting edge zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond tip combined with spacious chip-flushing channels prevents chip sticking and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimises vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReconditioning capability:\u003c\/strong\u003e Depending on the height of the diamond blade used: a tip \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening cycles\u003c\/strong\u003e, a tip \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while tips \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling and grooving operations.\u003c\/p\u003e\u003cp\u003eIt is particularly effective in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444756062548,"sku":"DTM.12.024.12.1DRN","price":247.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTM.12.024.12.1DRN_DTM.12.024.12.1DRN-109.jpg?v=1793965783"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i25-l82-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I25 L82 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD diamond milling cutter three-blade DTE.TURBO – for finishing, formatting and grooving processing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.025.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC centres and overhead milling machines. The tool's construction features three solid blades made of polycrystalline diamond \u003cb\u003eH4.5 and\u003c\/b\u003e a diamond tip that allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank with a precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finishing standard. The cutter is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body ensures high cutting efficiency, exceptional stability and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD diamond cutting tip:\u003c\/strong\u003e The tool's tip equipped with a PCD tip facilitates free, smooth and stable plunging of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, allowing the edge radii to reach \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond tip combined with capacious chip channels prevents the material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wearing the taper in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration possibility:\u003c\/strong\u003e depending on the height of the applied diamond blade: \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum sharpening of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while blades \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum sharpening of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated particleboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444778213716,"sku":"DTE.16.025.20.0SR","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.025.20.0SR_DTE.16.025.20.0SR-112.jpg?v=1793967681"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i55-l117-s16-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I55 L117 S16 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Mill Three-Edge DTE.TURBO – for finishing, formatting and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.055.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond mill from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC centres and overhead milling machines. The tool construction consists of three solid cutting edges made of polycrystalline diamond\u003cb\u003e H4.5 and\u003c\/b\u003e\u0026nbsp;a diamond cutting insert that allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finish standard. The mill is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The system of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting performance, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Cutting Insert:\u003c\/strong\u003e The tool's front is equipped with a PCD insert which facilitates free, smooth, and stable penetration of the mill in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Treatment (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry area:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with capacious chip channels prevents material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the mill from turning in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in an advanced class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReconditioning capability:\u003c\/strong\u003e depending on the height of the applied diamond edge: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 re-grinds\u003c\/strong\u003e, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e sharpening, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e sharpening, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e sharpening.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application scope:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling (formatting), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444778541396,"sku":"DTE.16.055.16.0SR","price":378.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.055.16.0SR_DTE.16.055.16.0SR-105.jpg?v=1793972982"},{"product_id":"fresa-diamantada-pcd-z3-1-d20-i45-l103-s20-h4-5-lh-pos-neg","title":"PCD diamond router bit Z3+1 D20 I45 L103 S20 H4,5 LH pos.\/neg.","description":"\u003ch2\u003eThree-edged PCD diamond cutter DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.20.045.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC centres and overhead milling machines. The construction of the tool consists of three full edges made of polycrystalline diamond \u003cb\u003eH4.5 and\u003c\/b\u003e a diamond front insert, which enables efficient and stable axial penetration into the material. The body made from selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finish standard. The cutter is available in a right-hand and left-hand variant.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting performance, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front insert:\u003c\/strong\u003e The tool's face equipped with a PCD insert facilitates free, smooth, and stable entry of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting area:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with spacious chip channels prevents the sticking of chips and enhances quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standards:\u003c\/strong\u003e Certified static-dynamic balancing in the high standard \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the diamond insert used: the insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, the insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables grinding a maximum of \u003cstrong\u003e2-3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for grinding a maximum of \u003cstrong\u003e3-4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for grinding a maximum of \u003cstrong\u003e4-6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated MDF boards, raw and laminated chipboards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444779852116,"sku":"DTE.20.045.20.0SL","price":306.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.20.045.20.0SL_DTE.20.045.20.0SL-102.jpg?v=1791282036"},{"product_id":"fresa-de-compresion-para-nesting-nexcut-vhm-z2-6-d12-i25-l80-s12-rh","title":"Compression nesting router bit NEXCUT VHM Z2+6 D12 I25 L80 S12 RH","description":"\u003ch2\u003eCompression spiral VHM milling cutter for nesting X99 NEXCUT with PLATINIUM coating – award-winning precision and outstanding durability\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX99.12.025.080.12PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe compression milling cutter for nesting NEXCUT X99 by ITA TOOLS is the official winner of the Gold Medal MTP at the International Fair of Machines, Tools and Components for the Wood and Furniture Industry DREMA 2026. The industrial spiral cutter made from a special grade of sintered carbide designed for nesting from the series X99 NEXCUT has a compression geometry (positive-negative) with an innovative protective PLATINIUM coating. The tool is designed for maximum efficiency during cutting, nesting technology, as well as jointing and edge alignment on CNC machining centres. The advanced blade system Z#liczba_ostrzy_z with finishing geometry combined with opposing screw lines guarantees a perfectly smooth surface and clean edges without chipping on both the upper and lower surfaces of the processed board. The ground shank in the H6 accuracy class effectively eliminates radial runout, protecting the drive system and preventing vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eWinner of the Gold Medal DREMA 2026:\u003c\/strong\u003e Officially distinguished with the prestigious MTP award for innovation, outstanding quality of processing, and advanced cutting technology in the furniture industry.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Z2+6 (NEXCUT) construction:\u003c\/strong\u003e The special 2+6 arrangement of spiral blades ensures excellent work culture, ideal edge finishing, and very high feed speeds while maintaining perfect cutting quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The opposing twist of the blades simultaneously pushes the chip down from the upper edge and up from the lower edge, pressing the laminate against the core of the board and eliminating the risk of tear-outs.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecial grade carbide for nesting:\u003c\/strong\u003e The use of selected monolith carbide with increased rigidity and impact resistance protects the blades from micro-chipping during continuous panel processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced two-layer PLATINIUM coating (.PR):\u003c\/strong\u003e An innovative PVD coating with an iridescent colour (gold-purple-blue), thickness of 1–4 µm, and micro-hardness of 3000 HV (HV 0.05). The combination of a hard layer with a tribological one allows for a very low coefficient of friction (0.02), drastically reduces material adhesion to the tool, and significantly extends blade life.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing cutting geometry:\u003c\/strong\u003e Precisely ground edges guarantee excellent surface quality without the need for additional processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures stability and quiet operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of applications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for efficient cutting operations, processing in nesting technology, as well as jointing and edge alignment on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: solid soft and hard wood, raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, and HPL plates.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444788535636,"sku":"X99.12.025.080.12PR","price":56.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X99.12.025.080.12PR_X99.12.025.080.12PR-111_c8c3af0f-c264-4e75-8bb3-ff472a80d9d5.jpg?v=1793968569"},{"product_id":"fresa-de-compresion-para-nesting-nexcut-vhm-z2-6-d8-i22-l70-s8-rh","title":"Compression nesting router bit NEXCUT VHM Z2+6 D8 I22 L70 S8 RH","description":"\u003ch2\u003eSpiral Milling Cutter VHM Compression for Nesting X99 NEXCUT with PLATINIUM Coating – Award-Winning Precision and Outstanding Durability\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX99.08.022.070.08PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe compression milling cutter for nesting NEXCUT X99 by ITA TOOLS is the official winner of the Gold Medal MTP at the International Fair of Machines, Tools, and Components for the Wood and Furniture Industry DREMA 2026. This industrial spiral cutter, made from a special grade of sintered carbide for nesting, features positive-negative compression geometry with an innovative PLATINIUM protective coating. The tool is designed for maximum efficiency in cutting, nesting technology processing, as well as edge jointing and trimming on CNC machining centres. The advanced Z#number_of_edges_z blade arrangement with finishing geometry, combined with opposite helices, guarantees a perfectly smooth surface and clean edges without chips on both the upper and lower surfaces of the workpiece board. The ground shank in accuracy class H6 effectively eliminates radial runout, protecting the drive system and preventing vibrations.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGold Medal Winner DREMA 2026:\u003c\/strong\u003e Officially distinguished with the prestigious MTP award for innovation, outstanding machining quality, and advanced cutting technology in the furniture industry.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Z2+6 (NEXCUT) Design:\u003c\/strong\u003e A special arrangement of 2+6 spiral blades ensures outstanding work culture, perfect edge finishing, and very high feed rates while maintaining perfect cutting quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompression Geometry (Positive-Negative):\u003c\/strong\u003e The counter-rotation of the blades simultaneously pushes chips down from the upper edge and up from the lower edge, pressing the laminate against the board core and eliminating the risk of tear-out.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecial Grade Carbide for Nesting:\u003c\/strong\u003e The use of selected monolithic carbide with increased stiffness and toughness protects the blades from micro-chipping during continuous board processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Two-Layer PLATINIUM Coating (.PR):\u003c\/strong\u003e An innovative PVD coating with an iridescent hue (gold-purple-blue), thickness of 1–4 µm, and microhardness of 3000 HV (HV 0.05). The combination of a hard layer with tribological properties allows for a very low friction coefficient (0.02), drastically reduces material adhesion to the tool, and significantly extends blade life.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Cutting Geometry:\u003c\/strong\u003e Precisely ground edges guarantee excellent edge surface quality without the need for additional processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Grip Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground grip surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures stability and quiet operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for efficient cutting operations, nesting technology processing, as well as edge jointing and trimming on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: soft and hard solid wood, raw and laminated MDF boards, raw and laminated particle boards, raw and laminated plywood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444788961620,"sku":"X99.08.022.070.08PR","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X99.08.022.070.08PR_X99.08.022.070.08PR-207.jpg?v=1793966617"},{"product_id":"fresa-diamantada-pcd-z3-1-d12-i22-l70-s12-h3-rh-pos-neg","title":"PCD diamond router bit Z3+1 D12 I22 L70 S12 H3 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Edge DTE DENSIMET® – for nesting, finishing and flattening\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.12.022.12.0DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, cutting, contour milling and flattening of surfaces on CNC machines and overhead spindle milling machines. The tool's construction consists of three solid blades made of polycrystalline diamond (\u003cb\u003eH3)\u003c\/b\u003e arranged on three spirals, complemented by a diamond front plate that enables smooth and stable axial plunging into the material. The body made of DENSIMET® (heavy alloy with extremely high density and vibration-damping capability) ensures outstanding rigidity, vibration reduction, and an excellent edge finish standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET®-based body:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during cutting, resulting in longer durability of the diamond blades and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+1 blade geometry in positive or negative variant:\u003c\/strong\u003e Three solid cutting edges made of polycrystalline diamond on three spirals allow for adjusting the chip eject direction (positive\/negative) depending on the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates free, smooth and stable plunging of the cutter in the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii in the range of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free from micro-chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smooth back of the PCD diamond plate combined with spacious chip channels prevents the sticking of chips and facilitates rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the exacting \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) minimizes noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling and flattening (planning) operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated MDF boards, raw and laminated chipboards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444803543380,"sku":"DTE.12.022.12.0DR","price":193.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.12.022.12.0DR_DTE.12.022.12.0DR-609.jpg?v=1793969135"},{"product_id":"fresa-diamantada-pcd-z3-1-d20-i25-l86-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D20 I25 L86 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Edge DTE.TURBO – for Finishing, Formatting and Mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.20.025.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC machines and overhead spindle milling machines. The tool's construction consists of three solid blades made of polycrystalline diamond \u003cb\u003eH4.5 and\u003c\/b\u003e a diamond front insert that enables efficient and stable axial immersion into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent standard of edge finishing. The cutter is offered in both right and left variants.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantee high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Front Insert:\u003c\/strong\u003e The front of the tool equipped with a PCD insert facilitates smooth, fluid, and stable immersion of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Processing (Ablation):\u003c\/strong\u003e The blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Cutting Zone:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with capacious chip flutes prevents chip adhesion and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of Gripping Part:\u003c\/strong\u003e The shank surface with a roughness value of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotating in the holder and eliminates the risk of taper wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRe-sharpening Capability:\u003c\/strong\u003e Depending on the height of the diamond blade used: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, versions \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling (formatting), and mortising.\u003c\/p\u003e\u003cp\u003eIt is particularly effective in machining materials such as raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444805607764,"sku":"DTE.20.025.20.0SR","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.20.025.20.0SR_DTE.20.025.20.0SR-209_e0bf7329-6fc0-4599-9e2a-e5ea5f2da6f5.jpg?v=1793969136"},{"product_id":"fresa-diamantada-pcd-nesting-z3-3-d12-i21-l67-s12-h2-5-rh-positivo","title":"PCD diamond NESTING router bit Z3+3 D12 I21 L67 S12 H2,5 RH positive","description":"\u003ch2\u003ePCD Diamond Cutter Three-Edge DTM DENSIMET® – for nesting, formatting, and finishing processing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTM.12.021.12.1DRP\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cb\u003eDTM\u003c\/b\u003e\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for high-performance nesting, cutting, and finishing operations on CNC centres and overhead milling machines. The advanced tool design features three solid blades made from polycrystalline diamond arranged on six spirals, complemented by a diamond front plate that enables efficient and stable axial plunge into the material. The body made of DENSIMET® (a heavy alloy with advanced vibration-damping capabilities) ensures high structural rigidity and reduces vibrations during machining. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the bearing system of the spindle and guaranteeing an excellent edge finishing standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® body:\u003c\/strong\u003e The use of high-density heavy metals precisely dampens vibrations during cutting, translating to longer durability of diamond blades and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+3 blade configuration on six spirals (positive\/negative):\u003c\/strong\u003e Three solid polycrystalline diamond blades arranged on six spirals in a positive or negative configuration guarantee an excellent edge finishing standard of the board and the appropriate material ejection direction (upwards or downwards).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Front Plate:\u003c\/strong\u003e The front of the tool is equipped with a PCD plate facilitating free, smooth, and stable plunging of the cutter in the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Cutting Edge Treatment (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing for edge radii of approximately \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents workpiece adhesion and improves the rapid removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and decreases vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e Depending on the height of the applied diamond blade: a plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e accommodates sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e permit sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, peripheral milling, and mortising operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444806230356,"sku":"DTM.12.021.12.1DRP","price":219.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTM.12.021.12.1DRP_DTM.12.021.12.1DRP_GIF-4_21bd991d-78ff-4eb4-a7cc-9db1c6116b8a.jpg?v=1793967723"},{"product_id":"fresa-diamantada-pcd-nesting-z2-2-d12-i24-l74-s12-h3-rh-negativo","title":"PCD diamond NESTING router bit Z2+2 D12 I24 L74 S12 H3 RH negative","description":"\u003ch2\u003eTwo-edged diamond milling cutter PCD DTF DENSIMET® – for nesting, formatting and finishing operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTF.12.024.12.0DRN\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cb\u003eDTF\u003c\/b\u003e\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for high-efficiency nesting, cutting, and finishing operations on CNC centres and overhead spindle milling machines. The advanced design of the tool features two solid blades made of polycrystalline diamond (\u003cb\u003eH3\u003c\/b\u003e) arranged on four spirals, complemented by a diamond front plate that enables efficient and stable axial penetration into the material. The body made from DENSIMET® (a heavy alloy with advanced vibration-dampening properties) ensures maximum rigidity of the construction and reduces vibrations during machining. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent edge finishing standard.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® based body:\u003c\/strong\u003e The use of heavy metals with high density precisely dampens vibrations during cutting, resulting in longer durability of diamond blades and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ2+2 blade arrangement on four spirals (positive\/negative):\u003c\/strong\u003e Two solid polycrystalline diamond blades arranged on four spirals in a positive or negative configuration guarantee an excellent edge finishing standard for plates and the appropriate direction of material ejection (upwards or downwards).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The front of the tool equipped with a PCD plate facilitates free, smooth, and stable penetration of the cutter into the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge treatment (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes and rake face:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents material from sticking and facilitates quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and diminishes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond blade used: a plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e, a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e sharpening, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e sharpening, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e sharpening.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt works excellently in the machining of materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444816486740,"sku":"DTF.12.024.12.0DRN","price":187.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTF.12.024.12.0DRN_DTF.12.024.12.0DRN-110.jpg?v=1791282170"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i20-l82-s20-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I20 L82 S20 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Edge DTE TURBO NESTING – for nesting, finishing, and formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.020.20.NSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTE TURBO NESTING\u003c\/strong\u003e series is designed for efficient nesting, cutting, and finishing operations on CNC centres and overhead spindle milling machines. The tool's structure consists of three solid polycrystalline diamond \u003cb\u003eH4\u003c\/b\u003e cutting edges arranged on three spirals and a diamond tip plate that allows for stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent standard of edge finishing.\u003c\/p\u003e\u003ch3\u003eDesign strengths and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThree solid edge design on a stainless steel body:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond fixed on a stainless steel body guarantees high cutting efficiency, high feed speeds, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD diamond tip plate:\u003c\/strong\u003e The front of the tool equipped with a PCD plate facilitates free, smooth, and stable penetration of the milling cutter in the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA edges are finished directly with a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and leading edge area:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with generously sized chip channels prevents the build-up of chips and facilitates quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the high class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond edge used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444819239252,"sku":"DTE.16.020.20.NSR","price":120.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.020.20.NSR_DTE.16.020.20.NSR-102.jpg?v=1791282178"},{"product_id":"fresa-de-compresion-para-nesting-acabado-vhm-z3-3-d12-i25-l80-s12-rh-platinum","title":"Compression router bit for nesting Finishing VHM Z3+3 D12 I25 L80 S12 RH Platinum","description":"\u003ch2\u003eHM finishing spiral end mill (with coating) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX90.12.025.080.12PR3\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made of a special grade of sintered carbide dedicated to nesting from the \u003cstrong\u003eX90\u003c\/strong\u003e series, with a compression construction (positive-negative) with factory \u003cstrong\u003ePlatinum\u003c\/strong\u003e coating. The tool is designed for high-efficiency cutting, nesting technology cutting, as well as edge jointing and alignment on CNC machining centres. Two opposite spiral twist directions press the material against the core of the board from both sides, eliminating the risk of chipping on the upper and lower edges. The ground shank in accuracy class H6 eliminates radial runout, protecting the drive system and ensuring high process stability.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e Opposite positioning of the cutting edges pushes the chips from the upper edge downwards and from the lower edge upwards, pressing the laminate to the core and ensuring clean edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSintered carbide dedicated to nesting (HM (with coating)):\u003c\/strong\u003e Selected grade of carbide with increased impact strength and rigidity prevents micro-chipping during continuous processing of boards.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePlatinum protective coating:\u003c\/strong\u003e Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces workpiece material adhesion and significantly extends tool life in difficult materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground surface of the shank eliminates the risk of slipping in the holder and prevents wear of the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards reduces vibrations and muffles operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, efficient nesting technology cutting, as well as edge jointing and alignment on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt works perfectly for machining materials such as: raw and laminated MDF boards, raw and laminated particle boards, raw and laminated plywood, soft and hard solid wood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444824088916,"sku":"X90.12.025.080.12PR3","price":72.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X90.12.025.080.12PR3_X90.12.025.080.12PR3-102.jpg?v=1794297826"},{"product_id":"fresa-de-compresion-para-nesting-acabado-vhm-z3-3-d10-i35-l80-s10-rh-platinum","title":"Compression router bit for nesting Finishing VHM Z3+3 D10 I35 L80 S10 RH Platinum","description":"\u003ch2\u003eFinishing spiral cutter HM (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX90.10.035.080.10PR3\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral cutter made of a special grade of sintered carbide dedicated to nesting from the \u003cstrong\u003eX90\u003c\/strong\u003e series, with a compression (positive-negative) construction and factory-installed \u003cstrong\u003ePlatinum\u003c\/strong\u003e coating. The tool is designed for high-performance cutting, nesting technology cutting, as well as edging and smoothing operations on CNC machining centres. Two counter-rotating spiral directions press the material against the core of the board from both sides, eliminating the risk of chipping on the upper and lower edges. The ground shank with an accuracy class of H6 mitigates radial run-out, protecting the drive system and ensuring high process stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The counter-positioning of the blades pushes chips down from the upper edge and up from the lower edge, pressing the laminate against the core and guaranteeing clean edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSintered carbide dedicated to nesting (HM (coated)):\u003c\/strong\u003e Selected grade of carbide with increased impact resistance and stiffness prevents micro-chipping during continuous processing of panels.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePlatinum protective coating:\u003c\/strong\u003e Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces material adhesion and significantly extends tool life in challenging materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank eliminates the risk of slippage in the holder and prevents wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing compliant with ISO standards reduces vibrations and silences operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, efficient nesting technology cutting, as well as edging and smoothing operations on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated particle board, raw and laminated plywood, soft and hard solid wood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444824416596,"sku":"X90.10.035.080.10PR3","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X90.10.035.080.10PR3_X90.10.035.080.10PR3-108_78b0994f-7037-4b5b-8282-02754906ab6c.jpg?v=1794302468"},{"product_id":"fresa-diamantada-pcd-nesting-z2-2-d16-i35-l95-s16-h3-rh-negativo","title":"PCD diamond NESTING router bit Z2+2 D16 I35 L95 S16 H3 RH negative","description":"\u003ch2\u003ePCD Diamond Milling Cutter with Two Cutting Edges DTF DENSIMET® – for nesting, shaping, and finishing operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTF.16.035.16.0DRN\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cb\u003eDTF\u003c\/b\u003e\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for high-performance nesting, cutting, and finishing operations on CNC centres and overhead spindle milling machines. The advanced tool design features two full polycrystalline diamond blades (\u003cb\u003eH3\u003c\/b\u003e) arranged on four spirals, complemented by a diamond cutting plate that enables efficient and stable axial penetration into the material. The body made of DENSIMET® material (heavy alloy with advanced vibration damping properties) ensures maximum rigidity of the structure and reduces vibrations during machining. The ground shank in a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle’s bearing system and ensuring an excellent edge finish standard.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative body based on DENSIMET®:\u003c\/strong\u003e The use of heavy metals with high density precisely dampens vibrations during cutting, resulting in longer tool life for diamond blades and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ2+2 blade arrangement on four spirals (positive\/negative):\u003c\/strong\u003e Two full polycrystalline diamond blades arranged on four spirals in either a positive or negative configuration guarantee an excellent edge finish standard for the board and the appropriate direction of chip ejection (upwards or downwards).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD cutting plate:\u003c\/strong\u003e The tool's cutting edge equipped with a PCD plate facilitates free, smooth, and stable plunging of the cutter in the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablative):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free from micro-chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smooth back part of the PCD cutting plate combined with capacious chip channels prevents chip sticking and improves rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a high class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRenewal capability:\u003c\/strong\u003e depending on the height of the diamond blade used: \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e cycles, \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 sharpening\u003c\/strong\u003e cycles, \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e3–4 sharpening\u003c\/strong\u003e cycles, while \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e4–6 sharpening\u003c\/strong\u003e cycles.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, peripheral milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444831035732,"sku":"DTF.16.035.16.0DRN","price":322.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTF.16.035.16.0DRN_DTF.16.035.16.0DRN-111.jpg?v=1791282222"},{"product_id":"fresa-diamantada-pcd-z3-1-d20-i65-l130-s20-h4-5-lh-pos-neg","title":"PCD diamond router bit Z3+1 D20 I65 L130 S20 H4,5 LH pos.\/neg.","description":"\u003ch2\u003eThree-bladed PCD Diamond Cutter DTE DENSIMET® – for nesting, finishing and surfacing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.20.065.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, cutting, peripheral milling and surfacing on CNC centres and overhead spindle milling machines. The tool features three solid blades made of polycrystalline diamond (\u003cb\u003eH4.5\u003c\/b\u003e) arranged on three spirals, complemented by a diamond cutting tip that allows for smooth and stable axial penetration into the material. The body made of DENSIMET® (a heavy alloy with an extremely high density and ability to dampen vibrations) ensures outstanding rigidity, vibration reduction and excellent edge finish quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® based body:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during machining, resulting in longer tool life for diamond blades and ideal surface quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+1 positive or negative blade geometry:\u003c\/strong\u003e Three solid cutting edges from polycrystalline diamond on three spirals allow for adjustment of the proper chip discharge direction (positive\/negative) depending on the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD cutting tip:\u003c\/strong\u003e The tool's front equipped with a PCD tip facilitates easy, smooth and stable penetration of the cutter along the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser cutting edge treatment (ablation):\u003c\/strong\u003e The profiles of the DIA edges are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting area:\u003c\/strong\u003e The smoothed back of the PCD diamond tip combined with capacious chip channels prevents material buildup and improves rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotation in the holder and eliminates the risk of wear to the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimizes noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond blade used: the \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e tip allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e processes, the \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e tip enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while tips \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, peripheral milling and surfacing (planning) operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as raw and laminated MDF boards, raw and laminated chipboards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444835000660,"sku":"DTE.20.065.20.0SL","price":420.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.20.065.20.0SL_DTE.20.065.20.0SL-112.jpg?v=1793972984"},{"product_id":"fresa-diamantada-pcd-z3-1-d25-i25-l89-s20-h4-5-lh-pos-neg","title":"PCD diamond router bit Z3+1 D25 I25 L89 S20 H4,5 LH pos.\/neg.","description":"\u003ch2\u003eThree-blade PCD diamond milling cutter DTE.TURBO – for finishing, formatting and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.25.025.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC centres and overhead spindle milling machines. The tool's construction features three full polycrystalline diamond blades\u003cb\u003e H4.5 and\u003c\/b\u003e\u0026nbsp;a diamond front insert that allows for efficient and stable axial immersion into the material. The body made from selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank with an accurate tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finishing standard. The cutter is available in both right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The configuration of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting performance, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDiamond PCD front insert:\u003c\/strong\u003e The tool's front fitted with a PCD insert facilitates free, smooth, and stable immersion of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii of approximately \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with spacious chip channels prevents material adhesion and enhances quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in an advanced \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) mitigates noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding capability:\u003c\/strong\u003e depending on the height of the applied diamond blade: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e the sharpening, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated particle board, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444835164500,"sku":"DTE.25.025.20.0SL","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.25.025.20.0SL_DTE.25.025.20.0SL-101.jpg?v=1794297832"},{"product_id":"fresa-diamantada-pcd-z3-1-d25-i35-l96-s25-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D25 I35 L96 S25 H4,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-blade PCD Diamond Cutter DTE.TURBO – for finishing, formatting, and grooving operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.25.035.25.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC centres and overhead spindle milling machines. The tool is constructed with three solid blades made of polycrystalline diamond \u003cb\u003eH4.5 and\u003c\/b\u003e a diamond front plate, which allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high stiffness and resistance to thermal and mechanical loads. The ground shank with an accurate tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the bearing system of the spindle and ensuring an excellent standard of edge finishing. The cutter is available in both right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates smooth, fluid, and stable entry of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e Edge profiles DIA are finished directly with a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting area:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip channels prevents material sticking and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against turning in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration possibility:\u003c\/strong\u003e Depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2-3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3-4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4-6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling (formatting), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444859314516,"sku":"DTE.25.035.25.0SR","price":236.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.25.035.25.0SR_DTE.25.035.25.0SR-101.jpg?v=1791282397"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i35-l95-s16-h3-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I35 L95 S16 H3 RH pos.\/neg.","description":"\u003ch2\u003ePCD diamond milling cutter three-blade DTE TURBO NESTING – for nesting, finishing and formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.035.16.NSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTE TURBO NESTING\u003c\/strong\u003e series is designed for efficient nesting, cutting, and finishing on CNC centres and overhead spindle milling machines. The tool's construction consists of three solid polycrystalline diamond \u003cb\u003eH3\u003c\/b\u003e blades arranged on three spirals and a diamond front cutter that allows for stable axial immersion into the material. The body made of selected stainless steel offers high stiffness and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finish standard.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction of three solid blades on a stainless steel body:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, high feed speeds, and clean edges of the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD diamond front cutter:\u003c\/strong\u003e The front of the tool equipped with a PCD plate facilitates free, smooth, and stable entry of the cutter along the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e to be achieved and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smooth back of the PCD diamond plate combined with spacious chip channels prevents material sticking and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the rigorous class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding capability:\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444859347284,"sku":"DTE.16.035.16.NSR","price":210.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.035.16.NSR_DTE.16.035.16.NSR-102.jpg?v=1791282398"},{"product_id":"fresa-diamantada-pcd-nesting-z3-3-d12-i19-l65-s12-h2-5-rh-negativo","title":"PCD diamond NESTING router bit Z3+3 D12 I19 L65 S12 H2,5 RH negative","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Edge DTM DENSIMET® – for nesting, formatting, and finishing processing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTM.12.019.12.1DRN\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cb\u003eDTM\u003c\/b\u003e\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for high-performance nesting, cutting, and finishing processing on CNC centres and overhead spindle milling machines. The advanced design of the tool consists of three solid blades made of polycrystalline diamond arranged on six spirals, complemented by a diamond front plate that enables efficient and stable axial penetration into the material. The body made from DENSIMET® (heavy alloy with advanced vibration damping capabilities) ensures high structural stiffness and reduces vibrations during processing. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and guaranteeing an excellent standard of edge finish.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative body based on DENSIMET®:\u003c\/strong\u003e The use of heavy metals with high density precisely dampens vibrations during cutting, which translates into longer durability of the diamond blades and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+3 blade arrangement on six spirals (positive\/negative):\u003c\/strong\u003e Three solid blades made of polycrystalline diamond arranged on six spirals in positive or negative configurations guarantee an excellent standard of edge finish for the board and the proper direction of chip ejection (upward or downward).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD diamond front plate:\u003c\/strong\u003e The tool's front is equipped with a PCD plate that facilitates free, smooth, and stable insertion of the cutter along the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge treatment (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly using a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and approach area:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents chip adhesion and facilitates rapid dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the grip part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in an exceptional class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, peripheral milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444861968724,"sku":"DTM.12.019.12.1DRN","price":207.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTM.12.019.12.1DRN_DTM.12.019.12.1DRN-104.jpg?v=1794297081"},{"product_id":"fresa-diamantada-pcd-nesting-z2-2-d12-i19-l65-s12-h3-rh-negativo","title":"PCD diamond NESTING router bit Z2+2 D12 I19 L65 S12 H3 RH negative","description":"\u003ch2\u003ePCD Diamond Milling Cutter Double Edged DTF DENSIMET® – for nesting, formatting and finishing processing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTF.12.019.12.0DRN\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cb\u003eDTF\u003c\/b\u003e\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for high-performance nesting, cutting and finishing on CNC centres and overhead spindle milling machines. The advanced tool design consists of two full blades made from polycrystalline diamond (\u003cb\u003eH3\u003c\/b\u003e) arranged on four spirals, complemented by a diamond front insert that allows for efficient and stable axial penetration into the material. The body made from DENSIMET® material (a heavy alloy with advanced vibration damping properties) ensures maximum rigidity of the structure and reduces vibrations during processing. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finishing standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® based body:\u003c\/strong\u003e The use of heavy metals with high density precisely dampens vibrations during cutting, resulting in longer tool life of diamond blades and optimal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ2+2 blade arrangement on four spirals (positive \/ negative):\u003c\/strong\u003e Two full blades made from polycrystalline diamond arranged on four spirals in a positive or negative arrangement guarantee an excellent edge finishing standard of the plate and the appropriate direction of chip ejection (upwards or downwards).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front insert:\u003c\/strong\u003e The front of the tool equipped with a PCD insert facilitates free, smooth, and stable immersion of the milling cutter in the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge treatment (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, achieving edge radii in the range of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with capacious chip channels prevents material sticking and improves the quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the taper in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in an exceptional class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegenerative capability:\u003c\/strong\u003e depending on the height of the diamond blade applied: the \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e insert allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, the \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e insert permits sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while the inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and field of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, peripheral milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444865671508,"sku":"DTF.12.019.12.0DRN","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTF.12.019.12.0DRN_DTF.12.019.12.0DRN-107.jpg?v=1791282437"},{"product_id":"fresa-diamantada-pcd-z3-3-d20-i35-l101-s20-h4-5-rh","title":"PCD diamond router bit Z3+3 D20 I35 L101 S20 H4,5 RH","description":"\u003ch2\u003eThree-blade diamond cutter PCD DTC – for formatting, finishing work, and mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex: DTC.20.035.20.2SR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTC\u003c\/strong\u003e series is designed for efficient formatting, cutting and finishing work on CNC centres and overhead spindle milling machines. The advanced tool design consists of three solid blades made of polycrystalline diamond \u003cb\u003eH4.5\u003c\/b\u003e with an increased axial angle of 35° arranged on six spirals. The body, made of special stainless steel with an increased hardness of \u003e 28 HRC, provides very good rigidity and advanced vibration damping capabilities during machining. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle's bearing system and guaranteeing an excellent edge finish standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eIncreased axial angle of 35°:\u003c\/strong\u003e A large axial angle reduces cutting resistance and prevents edge chipping of the material, ensuring an exceptionally clean surface after machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDurable stainless steel body (\u003e 28 HRC):\u003c\/strong\u003e The body is characterised by high mechanical and thermal resistance during intensive industrial work.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge treatment (ablation):\u003c\/strong\u003e The profiles of the cutting edges are finished directly with a laser beam, which allows achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents the workpiece from sticking and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding capability:\u003c\/strong\u003e depending on the height of the diamond blade used: a cutter \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, a cutter \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while cutters \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling (formatting) and mortising.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444874518868,"sku":"DTC.20.035.20.2SR","price":215.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTC.20.035.20.2SR_NTC.20.035.20.2SR-106.jpg?v=1793967674"},{"product_id":"fresa-de-compresion-para-nesting-acabado-vhm-z2-2-d12-i35-l80-s12-rh-platinum","title":"Compression router bit for nesting Finishing VHM Z2+2 D12 I35 L80 S12 RH Platinum","description":"\u003ch2\u003eFinishing spiral cutter HM (with coating) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX90.12.035.080.12PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral cutter made of a special grade of sintered carbide dedicated to nesting from the \u003cstrong\u003eX90\u003c\/strong\u003e series, with a compression design (positive-negative) and a factory coating of \u003cstrong\u003ePlatinum\u003c\/strong\u003e. The tool has been designed for high-performance cutting operations, cutting in nesting technology, as well as seam and edge trimming on CNC machining centres. Two opposing spiral twist directions press the material against the plate core from both sides, eliminating the risk of chipping at the upper and lower edges. The ground shank in class H6 eliminates radial runout, protecting the drive system and ensuring high process stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e Opposing blade arrangement pushes chips from the upper edge down and from the lower edge up, pressing the laminate to the core and guaranteeing clean edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSintered carbide dedicated to nesting (HM (with coating)):\u003c\/strong\u003e Selected grade of carbide with increased impact resistance and stiffness prevents micro-chipping during continuous plate processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePlatinum protective coating:\u003c\/strong\u003e Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces workpiece adhesion and significantly extends tool life in difficult materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground surface of the shank eliminates the risk of slipping in the chuck and prevents wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards reduces vibrations and quiets operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, efficient cutting in nesting technology, as well as seam and edge trimming on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt works perfectly in processing materials such as: raw and laminated MDF boards, raw and laminated particle boards, raw and laminated plywood, soft and hard solid wood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444880482644,"sku":"X90.12.035.080.12PR","price":66.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X90.12.035.080.12PR_X90.12.035.080.12PR-102_d41baf14-7819-4774-afd9-09acd24a8e60.jpg?v=1793968561"},{"product_id":"fresa-de-compresion-para-nesting-nexcut-vhm-z2-6-d12-7-i25-4-l76-2-s12-7-rh","title":"Compression nesting router bit NEXCUT VHM Z2+6 D12,7 I25,4 L76,2 S12,7 RH","description":"\u003ch2\u003eVHM Compression Spiral Cutter for Nesting X99 NEXCUT with PLATINIUM Coating – Award-winning Precision and Outstanding Durability\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eX99.13.254.762.13PR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe NEXCUT X99 compression cutter from ITA TOOLS is the official winner of the Gold Medal MTP at the International Fair of Machines, Tools, and Components for the Wood and Furniture Industry DREMA 2026. This industrial spiral cutter is made from a special grade of cemented carbide designed for nesting from the X99 NEXCUT series in a compression geometry (positive-negative), featuring an innovative protective PLATINIUM coating. The tool is designed for maximum efficiency in cutting, nesting technology, and edge gluing and truing on CNC machining centres. The advanced cutter geometry Z#liczba_ostrzy_z combined with counter-rotating helical flutes guarantees a perfectly smooth surface and clean edges without chipping on both the top and bottom surfaces of the workpiece. The ground shank in precision class H6 effectively eliminates radial runout, protecting the drive system and preventing vibrations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGold Medal Winner DREMA 2026:\u003c\/strong\u003e Officially recognised with the prestigious MTP award for innovation, outstanding machining quality, and advanced cutting technology in the furniture industry.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Z2+6 Design (NEXCUT):\u003c\/strong\u003e A special arrangement of 2+6 spiral cutters ensures exceptional working culture, perfect edge finishing, and very high feed rates while maintaining perfect cutting quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCompression Geometry (Positive-Negative):\u003c\/strong\u003e The counter-rotating twist of the blades simultaneously pushes chips from the upper edge down and from the lower edge up, pressing the laminate against the core of the board and eliminating the risk of tear-out.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecial Grade of Carbide for Nesting:\u003c\/strong\u003e The use of selected monolithic carbide with increased stiffness and impact resistance protects the blades from micro-chipping during continuous panel machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Two-layer PLATINIUM Coating (.PR):\u003c\/strong\u003e Innovative PVD coating with an iridescent colour (gold-purple-blue), thickness of 1–4 µm, and microhardness of 3000 HV (HV 0.05). The combination of a hard layer with a tribological one allows for very low friction coefficients (0.02), drastically reducing material sticking to the tool and significantly extending blade life.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Cutting Geometry:\u003c\/strong\u003e Precision-ground edges guarantee excellent edge surface quality without the need for further processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank surface prevents slippage in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing Class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees stability and quiet operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for efficient operations in cutting, nesting technology processing, as well as edge gluing and truing on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt works perfectly with materials such as: soft and hard solid wood, raw and laminated MDF boards, raw and laminated particle boards, raw and laminated plywood, and HPL boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444882022740,"sku":"X99.13.254.762.13PR","price":63.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/X99.13.254.762.13PR_X99.13.254.762.13PR-107_c77c8f55-74af-47b9-87a5-cc2fa0ed697b.jpg?v=1793968569"},{"product_id":"fresa-diamantada-pcd-z3-1-d20-i55-l116-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D20 I55 L116 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD diamond milling cutter three-blade DTE.TURBO – for finishing, formatting, and grooving operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.20.055.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-efficiency formatting, cutting, and finishing operations on CNC machining centres and overhead spindle milling machines. The tool is constructed from three full blades made of polycrystalline diamond\u003cb\u003e H4.5 and\u003c\/b\u003e\u0026nbsp;a diamond face plate, which allows for efficient and stable axial immersion into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finishing standard. The cutter is available in right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The configuration of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting performance, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD face plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates free, smooth, and stable immersion of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser-treated cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii in the range of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting area:\u003c\/strong\u003e The smooth rear part of the PCD diamond plate combined with capacious chip channels prevents material build-up and improves quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to norm G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding capability:\u003c\/strong\u003e depending on the height of the used diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, peripheral milling (formatting), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt works excellently in the processing of materials such as raw and laminated MDF boards, raw and laminated chipboards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444882055508,"sku":"DTE.20.055.20.0SR","price":378.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i35-l97-s16-h4-lh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I35 L97 S16 H4 LH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Cutter Three-Edge DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.035.16.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC centres and overhead spindle milling machines. The tool's structure features three full edges made of polycrystalline diamond \u003cb\u003eH4 and\u003c\/b\u003e a diamond tip, which allows for efficient and stable axial penetration into the material. The body, made from selected stainless steel, offers high stiffness and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial run-out, protecting the spindle bearing and ensuring an excellent standard of edge finish. The cutter is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Diamond Tip:\u003c\/strong\u003e The tool's face equipped with a PCD tip facilitates free, smooth, and stable penetration of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly by a laser beam, achieving edge radii levels of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Face:\u003c\/strong\u003e The smoothed back part of the PCD diamond tip combined with deep chip channels prevents build-up of chips and enhances quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The shaft surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration Possibility:\u003c\/strong\u003e depending on the height of the diamond tip used: the \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e tip allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e, the \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e tip enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, the \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e variants allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while the \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e tips allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, peripheral milling (formatting), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as raw and laminated MDF boards, raw and laminated chipboards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444886511956,"sku":"DTE.16.035.16.0SL","price":236.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.035.16.0SL_DTE.16.035.16.0SL-102.jpg?v=1791282565"},{"product_id":"fresa-diamantada-pcd-z3-1-d12-i27-l75-s12-h2-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D12 I27 L75 S12 H2,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-flute diamond mill PCD DTE DENSIMET® – for nesting, finishing and leveling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.12.027.12.0DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond mill from the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, cutting, peripheral milling, and leveling surfaces on CNC centres and overhead spindle mills. The tool features three full cutting edges made of polycrystalline diamond (\u003cb\u003eH2.5)\u003c\/b\u003e arranged on three spirals, complemented by a diamond front plate that allows for efficient and stable axial penetration into the material. The body made of DENSIMET® material (a heavy alloy with an extremely high density and ability to dampen vibrations) ensures outstanding stiffness, reduced vibration, and excellent edge finish quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative body based on DENSIMET®:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during cutting, resulting in longer tool life and ideal workpiece surface quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+1 blade geometry in positive or negative variants:\u003c\/strong\u003e Three full cutting edges made of polycrystalline diamond on three spirals allow for the adjustment of proper chip discharge direction (positive\/negative) depending on the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD diamond front plate:\u003c\/strong\u003e The tool's front equipped with a PCD plate facilitates smooth, fluid, and stable penetration of the mill in the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e The DIA blade profiles are processed directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents material build-up and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotating in the holder and eliminates the risk of wearing the taper in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) mitigates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond blade applied: \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e plate allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e plate enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, peripheral milling, and leveling (planning) operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as raw and laminated MDF boards, raw and laminated particle boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444890149204,"sku":"DTE.12.027.12.0DR","price":235.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.12.027.12.0DR_DTE.12.027.12.0DR-106.jpg?v=1793967677"},{"product_id":"fresa-diamantada-pcd-z3-1-d20-i50-l110-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D20 I50 L110 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Mill Three-Edged DTE.TURBO – for Finishing, Formatting, and Mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.20.050.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond mill from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-efficiency formatting, cutting, and finishing on CNC centres and overhead milling machines. The tool's construction consists of three full edges made of polycrystalline diamond\u003cb\u003e H4.5 and\u003c\/b\u003e\u0026nbsp;a diamond front cutting insert, which allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent edge finishing standard. The mill is available in right and left versions.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Front Cutting Insert:\u003c\/strong\u003e The tool's front is equipped with a PCD insert that facilitates free, smooth, and stable plunging of the mill along the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Processing (Ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing edge radii of about \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Ramping Area:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with spacious chip channels prevents material build-up and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the mill from spinning in the collar and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in a tightened class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding Capability:\u003c\/strong\u003e Depending on the height of the diamond insert used: the insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, the insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling (formatting), and mortising.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as raw and laminated MDF board, raw and laminated chipboard, and both raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444898603348,"sku":"DTE.20.050.20.0SR","price":341.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.20.050.20.0SR_DTE.20.050.20.0SR-102.jpg?v=1794297125"}],"url":"https:\/\/es.ita.tools\/en\/collections\/compression-router-bits.oembed","provider":"ITA TOOLS","version":"1.0","type":"link"}