{"title":"PCD and carbide tools","description":"\u003ch2\u003ePCD Diamond \u0026amp; Interchangeable Insert (HM) Router Bits for CNC – Buyer's Guide\u003c\/h2\u003e\u003cp\u003eHigh-efficiency cutting, sizing, and profiling on CNC machining centers require tooling that maximizes production continuity and guarantees a flawless edge finish on furniture panels. Professional \u003cstrong\u003estraight and profile PCD diamond router bits, as well as interchangeable carbide insert (HM) router bits by ITA TOOLS\u003c\/strong\u003e, represent two complementary cutting systems designed to eliminate unplanned downtime in the woodworking and furniture industries.\u003c\/p\u003e\u003ch3\u003eApplication and Material Compatibility\u003c\/h3\u003e\u003cp\u003eThe body construction and physicochemical properties of the cutting edges are fully optimized for machining hard, homogeneous, as well as multi-layer wood-based and synthetic materials:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFurniture boards:\u003c\/strong\u003e chipboard, MDF, and HDF (raw, veneered, and double-sided melamine or foil laminated).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh-pressure laminates \u0026amp; solid surfaces:\u003c\/strong\u003e HPL, Corian®, and selected plastics.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePlywood \u0026amp; timber:\u003c\/strong\u003e hardwood, softwood, plywood, and highly abrasive composites.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eEconomic and Operational Advantages of Interchangeable HM Inserts\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstant cutting diameter:\u003c\/strong\u003e Mechanical replacement of worn inserts directly in the workshop eliminates the need to input dimensional corrections into the CNC controller. The tool's working diameter remains constant throughout the lifecycle of the body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo external service logistics:\u003c\/strong\u003e Dull edges are replaced with new ones in just a few minutes. This eliminates the cost and time of transporting the router bit to an external sharpening facility, ensuring immediate operational continuity.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMultiple edge utilization:\u003c\/strong\u003e The design of the system indexable inserts allows them to be rotated, offering up to four independent cutting edges from a single knife before total replacement is necessary.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOperational Advantages of Brazed Diamond (PCD) Edges\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eExtreme wear resistance:\u003c\/strong\u003e Synthetic polycrystalline diamond from leading European suppliers ensures up to 50 times longer tool life compared to conventional cutting materials when processing highly abrasive boards.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eThermomechanical stability:\u003c\/strong\u003e The monolithic crystal structure of the diamond prevents rapid overheating of the machining zone, which drastically reduces cutting resistance during serial production.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eSelection Criteria: Diamond (PCD) or Interchangeable Insert (HM)?\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eChoose the HM interchangeable system if:\u003c\/strong\u003e Production is single-piece or small-batch, you frequently change profiles, or you work with materials that carry a risk of contamination (e.g., reclaimed wood or plywood with hidden staples) that could cause brittle fracture of a diamond tip.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eChoose the PCD diamond system if:\u003c\/strong\u003e You run repetitive, high-volume sizing and nesting operations. This choice guarantees the lowest unit cost per linear meter of machined laminate.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eRegeneration and Lifetime of Diamond Router Bits\u003c\/h3\u003e\u003cp\u003eUnlike disposable HM inserts, PCD diamond router bits can be resharpened multiple times in specialized facilities. The tool's total service potential is determined by the factory height of the diamond layer (H-parameter):\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003ePCD height H = 2.5 mm:\u003c\/strong\u003e Provides a margin for 2 to 3 sharpening cycles.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD height H = 3.5 mm:\u003c\/strong\u003e Provides a margin for 3 to 5 sharpening cycles.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions – FAQ\u003c\/h2\u003e\u003ch3\u003e1. What is nesting and which tools should be used for it?\u003c\/h3\u003e\u003cp\u003eNesting is an efficient panel-processing technology where complex component shapes are cut out from a single full sheet of material on a CNC vacuum table. For this process, you should use \u003cstrong\u003ediamond router bits with an alternating positive\/negative axial layout (compression bits)\u003c\/strong\u003e, such as the DTF or DTM series. Their specific geometry and axial angle ensure that the upper edges push chips downward (protecting the top laminate) while the lower edges pull them upward (protecting the bottom edge). This localizes cutting forces inside the panel, eliminates chipping on both sides, and generates an additional downward force that holds the workpiece firmly to the table.\u003c\/p\u003e\u003ch3\u003e2. What are the benefits of H6 shank tolerance and Ra ≤ 0.3 μm surface roughness?\u003c\/h3\u003e\u003cp\u003eThe H6 tolerance class guarantees a perfect dimensional fit between the tool shank and the chuck bore (e.g., ER collets, hydraulic, or shrink-fit sleeves). Meanwhile, a surface roughness level of Ra ≤ 0.3 μm prevents micro-slippage of the tool inside the holder. Combined, these two parameters \u003cstrong\u003ecompletely eliminate radial run-out\u003c\/strong\u003e, protecting expensive CNC spindle bearings from premature wear and ensuring constant cutting geometry.\u003c\/p\u003e\u003ch3\u003e3. Why is dynamic balancing in the G2.5 class crucial?\u003c\/h3\u003e\u003cp\u003eIndustrial CNC router bits operate at very high rotational speeds (18,000 – 24,000 RPM). Strict dynamic balancing in the G2.5 class prevents harmonic vibrations and dangerous centrifugal forces. Eliminating tool vibration directly improves surface smoothness after milling and effectively protects brittle cutting edges against micro-chipping under vibration.\u003c\/p\u003e\u003ch3\u003e4. What is the advantage of PCD sharpening using the laser ablation method?\u003c\/h3\u003e\u003cp\u003eTraditional electrical discharge machining (EDM) erodes the cobalt binder of the diamond, leaving micro-pores on the edge. The innovative laser ablation technology used by ITA TOOLS evaporates excess material without thermomechanical contact. This achieves a cutting edge with a rounding radius of just 15 μm, translating to unprecedented sharpness, lower cutting resistance, and the removal of the absolute minimum amount of diamond during servicing, which radically extends tool life.\u003c\/p\u003e\u003ch3\u003e5. What is the purpose of a specially polished back edge on diamond tips?\u003c\/h3\u003e\u003cp\u003eThe specially polished finish of the PCD inserts in ITA TOOLS router bits drastically lowers the coefficient of friction during operation. This prevents hot dust and resins contained in furniture boards from adhering to the tool body. The chip channels remain perfectly clear, preventing workpiece scorching and overheating of the edge itself.\u003c\/p\u003e","products":[{"product_id":"fresa-de-cuchillas-intercambiables-para-planear-z3-d35-i10-5-l60-s8-rh","title":"Indexable insert planing router bit Z3 D35 I10,5 L60 S8 RH","description":"\u003ch2\u003ePlanning cutter with interchangeable HM inserts from the \u003cstrong\u003eFWP\u003c\/strong\u003e series\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eFWP.035.010.08.0SR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe industrial cutter with interchangeable tungsten carbide (HM) inserts from the \u003cstrong\u003eFWP\u003c\/strong\u003e series is designed for precise surface leveling on CNC machining centres and overhead milling machines. The tool's design is based on a stable mounting of interchangeable HM blades in the \u003cstrong\u003eZ#number_of_edges\u003c\/strong\u003e configuration, which ensures effective and clean surface cutting. The cutter body is made of special steel with increased hardness (\u003e 28 HRC), guaranteeing high rigidity and resistance to deformation. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSystem of interchangeable tungsten carbide (HM) inserts:\u003c\/strong\u003e The use of screw-mounted HM inserts allows for quick changes of the cutting edge after dulling, eliminating downtimes associated with the sharpening process.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStable body made of steel (\u003e 28 HRC):\u003c\/strong\u003e The design made of steel with increased hardness ensures high dimensional stability and advanced vibration damping capabilities during large surface machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for surface leveling operations (planning MDF substrate tables and material surfaces).\u003c\/p\u003e\u003cp\u003eIt works excellently in the machining of materials such as raw and laminated MDF boards and raw and laminated chipboards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444634001748,"sku":"FWP.035.010.08.0SR","price":40.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/FWP.035.010.08.0SR_FWP.035.010.08.0SR-108.jpg?v=1793967917"},{"product_id":"fresa-de-cuchillas-intercambiables-para-planear-z2-d58-i12-l85-s20-rh","title":"Indexable insert planing router bit Z2 D58 I12 L85 S20 RH","description":"\u003ch2\u003ePlanning cutter with interchangeable HM plates from the \u003cstrong\u003eFWP\u003c\/strong\u003e series\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eFWP.058.012.20.0SR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe industrial cutter with interchangeable cemented carbide (HM) plates from the \u003cstrong\u003eFWP\u003c\/strong\u003e series is designed for precise planing of surfaces on CNC machining centres and overhead spindle milling machines. The tool's design is based on a stable fixation of replaceable HM knives in the \u003cstrong\u003eZ#number_of_edges_with\u003c\/strong\u003e configuration, ensuring efficient and clean machining of surfaces. The cutter body is made of a special steel with increased hardness (\u003e 28 HRC), which guarantees high rigidity and resistance to deformation. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial run-out, protecting the spindle bearing system.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSystem of interchangeable cemented carbide (HM) plates:\u003c\/strong\u003e The use of screw-mounted HM plates allows quick changing of the cutting edge after blunting, eliminating downtime related to the sharpening process.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStable steel body (\u003e 28 HRC):\u003c\/strong\u003e The construction from enhanced hardness steel ensures high dimensional stability and advanced vibration damping capabilities during large-surface machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the grip area:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in an exceptional class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at the highest speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for surface planing operations (planing MDF substrate tables and material surfaces).\u003c\/p\u003e\u003cp\u003eIt works excellently in machining materials such as raw and laminated MDF boards as well as raw and laminated chipboard.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444636655956,"sku":"FWP.058.012.20.0SR","price":132.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/FWP.058.012.20.0SR_FWP.058.012.20.0SR-106.jpg?v=1793967921"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d10-i15-l60-s12-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D10 I15 L60 S12 H3,5 RH","description":"\u003ch2\u003ePCD Diamond End Mill DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.10.015.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond end mill from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, trimming and finishing operations on CNC machining centres and overhead milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The blades are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – made of heavy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e alloy (a tungsten metal alloy that dampens vibrations during cutting). The compression system protects the laminate from chipping edges from the top and bottom, while the front diamond plate ensures smooth tool entry into the material along the Z axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Processing (Ablation):\u003c\/strong\u003e The cutting tool profiles are finished directly with a laser beam, achieving edge radii around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Grooves and Entry Area:\u003c\/strong\u003e The smoothed back of the PCD diamond plates combined with spacious chip channels prevents material from sticking and improves quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Grip Part:\u003c\/strong\u003e The shaft surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in a high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, contour milling, grooving, notching, and sinking into material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, composites with glass and carbon fibre (GFRP\/CFRP), HPL boards, aluminium and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444645536084,"sku":"DTS.10.015.12.0DR","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.10.015.12.0DR_DTS.10.015.12.0DR-112.jpg?v=1791281507"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d12-i25-l70-s12-h3-rh","title":"PCD straight diamond router bit Z2+1 D12 I25 L70 S12 H3 RH","description":"\u003ch2\u003ePCD Diamond Router Bit with Cutting Edge – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.12.025.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond router from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead spindle milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3\u003c\/strong\u003e). The blades are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from a heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during cutting). The compression system protects the laminate from edge chipping from both the top and bottom, while the front diamond plate ensures seamless entry of the tool into the material in the Z-axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Processing of Cutting Edges (Ablation):\u003c\/strong\u003e DIA blade profiles are finished directly by a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Flute Grooves and Rake Area:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with spacious chip channels prevents chip adhesion and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Grip Section:\u003c\/strong\u003e The shaft surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the router from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in a high class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with a plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, contour milling, t-slotting, grooving, and pocketing in the material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444645699924,"sku":"DTS.12.025.12.0DR","price":212.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.12.025.12.0DR_DTS.12.025.12.0DR-207.jpg?v=1791281510"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d8-i20-l75-s12-h3-rh","title":"PCD straight diamond router bit Z2+1 D8 I20 L75 S12 H3 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter with Twin Edges DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.08.020.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting operations, formatting, and finishing machining on CNC machining centres and overhead spindle milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a frontal drilling blade (\u003cstrong\u003ePCD Z2+1 H3\u003c\/strong\u003e). The edges are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy dampening vibrations during cutting). The compression arrangement protects the laminate from edge chipping from above and below, while the frontal diamond plate ensures a smooth entry of the tool into the material along the Z-axis. The precise gripping tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and ensuring optimal machining quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with voluminous chip channels prevents material cling and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the holder:\u003c\/strong\u003e The shaft surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in an enhanced class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, jointing, grooving, and sinking in material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboard and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444646027604,"sku":"DTS.08.020.12.0DR","price":189.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.08.020.12.0DR_DTS.08.020.12.0DR-103.jpg?v=1791281512"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d12-i20-l70-s12-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D12 I20 L70 S12 H3,5 RH","description":"\u003ch2\u003ePCD diamond cutter two-edged DTS with drilling blade – for nesting and finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.12.020.12.0MR\u003c\/p\u003e\u003cp\u003eProfessional diamond cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a frontal drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The blades are mounted on a sintered carbide HM body with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from a heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during machining). The compression system protects the laminate from edge chipping from the top and bottom, while the frontal diamond plate ensures smooth tool entry into the material along the Z axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The blade profiles of DIA are finished directly with a laser beam, allowing edge radii to reach levels of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents workpiece sticking and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shaft surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specifications (height of PCD plate):\u003c\/strong\u003e plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2-3 times\u003c\/strong\u003e, while the version with plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3-4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, contour milling, mortising, grooving, and plunging into the material.\u003c\/p\u003e\u003cp\u003eIt works perfectly in machining materials such as: raw and laminated chipboard and MDF, raw and laminated plywood, glass fibre and carbon fibre composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444646060372,"sku":"DTS.12.020.12.0MR","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.12.020.12.0MR_DTS.12.020.12.0MR-102.jpg?v=1791281514"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d8-i15-l60-s12-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D8 I15 L60 S12 H3,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter with Two Edges DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.08.015.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead spindle milling machines. The cutter features two solid plates of polycrystalline diamond arranged in a compressive geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The blades are mounted on a body made of sintered carbide monolith HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – made of heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during cutting). The compressive arrangement protects the laminate from chipping at the edges from above and below, while the front diamond plate ensures smooth entry of the tool into the material in the Z-axis. The precise tolerance class of the shank \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii of approximately \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Cutting Zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate, combined with voluminous chip channels, prevents workpiece adhesion and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing at a high \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e A plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with a plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Range of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, jointing, grooving, and sinking into the material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, composites with glass and carbon fibres (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444646125908,"sku":"DTS.08.015.12.0DR","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.08.015.12.0DR_DTS.08.0158.12.0DR-109_50b243c9-b94b-429f-b73c-cd62ce3bf45d.jpg?v=1793969152"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d12-i20-l66-s12-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D12 I20 L66 S12 H3,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter Double-Edged DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.12.020.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead spindle milling machines. The blade construction features two full polycrystalline diamond plates arranged in a compressive geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The blades are mounted on a sintered monolithic carbide HM body with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from the heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (tungsten metal alloy that dampens vibrations during cutting). The compressive arrangement protects the laminate from chipping on the edges from above and below, while the front diamond plate ensures smooth entry of the tool into the material along the Z-axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial run-out, protecting the spindle and ensuring optimal machining quality.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Treatment (Ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Ramping Zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip channels prevents chip adherence and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Grip:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e the \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e plate allows sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with the \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e plate allows sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, peripheral milling, grooving, and sinking into the material.\u003c\/p\u003e\u003cp\u003eIt is perfectly suited for machining materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), HPL panels, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444646650196,"sku":"DTS.12.020.12.0DR","price":189.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.12.020.12.0DR_DTS.12.020.12.0DR-107.jpg?v=1791281518"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d8-i15-l70-s8-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D8 I15 L70 S8 H3,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.08.015.08.0MR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting operations, formatting, and finishing machining on CNC machining centres and overhead milling machines. The blade construction consists of two full polycrystalline diamond inserts arranged in a compressive geometry (positive-negative) along with a frontal drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The inserts are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from the heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during cutting). The compressive arrangement protects the laminate from edge chipping from above and below, while the frontal diamond insert ensures a smooth entry of the tool into the material along the Z-axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii in the range of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents material buildup and facilitates rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and minimises vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (PCD insert height):\u003c\/strong\u003e The insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with an insert \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, peripheral milling, dovetailing, grooving, and plunging into the material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as raw and laminated chipboards, MDF, raw and laminated plywood, composites with glass and carbon fibre (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444647010644,"sku":"DTS.08.015.08.0MR","price":132.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.08.015.08.0MR_DTS.08.015.08.0MR-306.jpg?v=1793967832"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d20-i25-l85-s20-h3-rh","title":"PCD straight diamond router bit Z2+1 D20 I25 L85 S20 H3 RH","description":"\u003ch2\u003eTwo-edged PCD diamond cutter DTS with drilling blade – for nesting and finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.20.025.20.0SR\u003c\/p\u003e\u003cp\u003eA professional diamond cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compressive geometry (positive-negative) along with a frontal drilling blade (\u003cstrong\u003ePCD Z2+1 H3\u003c\/strong\u003e). The blades are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – made of a heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during cutting). The compressive system protects the laminate from chipping at the top and bottom, while the frontal diamond plate ensures smooth entry of the tool into the material along the Z-axis. The precise gripping tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, allowing for edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with capacious chip channels prevents the workpiece from sticking and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of the PCD plate):\u003c\/strong\u003e The plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, whereas the variant with the plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, mortising, grooving, and embedding into materials.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, fibre-reinforced composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444647338324,"sku":"DTS.20.025.20.0SR","price":194.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.20.025.20.0SR_DTS.20.025.20.0SR-110.jpg?v=1793967837"},{"product_id":"fresa-diamantada-recta-pcd-z3-d12-i15-l85-s12-h3-5-rh","title":"PCD straight diamond router bit Z3 D12 I15 L85 S12 H3,5 RH","description":"\u003ch1\u003eThree-blade PCD Diamond Cutter\u003c\/h1\u003e\u003cp\u003eIndex: DT3.12.015.12.0SR\u003c\/p\u003e\u003cp\u003eIndustrial three-blade diamond cutter from the \u003cstrong\u003eDT3\u003c\/strong\u003e series, equipped with polycrystalline diamond (PCD) blades. The tool is designed for high-performance cutting, shaping, leveling, grooving and slotting of wood-based and composite materials on CNC machining centres. The body made of sintered carbide with a hardness of 93.8 HRA or high-quality stainless steel ensures maximum rigidity and stability during machining. The PCD blades set in negative or straight geometry provide a clean edge and outstanding longevity. The tool design allows for multiple sharpening (2–4 times depending on the height of the diamond insert), significantly reducing operating costs. The ground shank in accuracy class H6 protects against radial runout.\u003c\/p\u003e\u003ch3\u003eKey technical parameters and properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003ePolycrystalline diamond (PCD) blades:\u003c\/strong\u003e Three full PCD blades with negative or straight geometry ensure outstanding durability and clean quality of the processed material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReinforced body:\u003c\/strong\u003e Made from sintered carbide (93.8 HRA) or stainless steel, eliminating vibrations and providing high dimensional stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMultiple sharpening capability:\u003c\/strong\u003e PCD inserts with a height of H2.5 allow for 2–3 sharpening cycles, while a height of H3 enables 3–4 regeneration operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOperational versatility:\u003c\/strong\u003e Blade geometry adapted for cutting, shaping, angular connections, grooving and making slots.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOptimised grip roughness:\u003c\/strong\u003e Low grip surface roughness (Ra ≤ 0.3 µm) prevents slipping in the holder and protects the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Static-dynamic balancing in accordance with ISO\/EN standard (class G2.5) protects spindle bearings and ensures vibration-free operation.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and material suitability:\u003c\/h3\u003e\u003cp\u003eDedicated to mass machining on CNC machines and overhead milling machines in the furniture and carpentry industry.\u003c\/p\u003e\u003cp\u003eMaterial being processed: Raw and laminated MDF, raw and laminated chipboard, cement-bonded fibreboards, glass and carbon fibre composites, Corian®, HPL, raw and laminated plywood, and aluminium.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648059220,"sku":"DT3.12.015.12.0SR","price":204.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT3.12.015.12.0SR_DT3.12.015.12.0SR-308.jpg?v=1793967615"},{"product_id":"fresa-diamantada-pcd-z1-1-d8-i21-l69-s12-h2-5-rh","title":"PCD diamond router bit Z1+1 D8 I21 L69 S12 H2,5 RH","description":"\u003ch2\u003ePCD diamond milling cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.08.021.12.0SR\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series intended for formatting and finishing processing on CNC centres and overhead milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – sintered carbide monolith (HM). Thoughtful geometry of the cutting edges ensures stable guiding in the processed material, while the high clamping precision class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial run-out, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond insert combined with capacious chip channels prevents sticking of the material and facilitates rapid removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the highly demanded class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBlade sharpening specification (height of PCD insert):\u003c\/strong\u003e depending on the height of the applied diamond blade: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling and mortising operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648223060,"sku":"DTA.08.021.12.0SR","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.08.021.12.0SR_DTA.08.021.12.0SR-102.jpg?v=1793967620"},{"product_id":"fresa-diamantada-pcd-z1-1-d8-i27-l81-s8-h2-5-rh","title":"PCD diamond router bit Z1+1 D8 I27 L81 S8 H2,5 RH","description":"\u003ch2\u003eDiamond PCD milling cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.08.027.08.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead milling machines. The tool's construction is based on a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of steel with increased hardness (\u003e 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high accuracy class of the grip \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is offered in both right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly by a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents chip sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimises noise and reduces vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD insert):\u003c\/strong\u003e Depending on the height of the applied diamond blade: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and area of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and mortising.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648354132,"sku":"DTA.08.027.08.0MR","price":83.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.08.027.08.0MR_DTA.08.027.08.0MR-108.jpg?v=1793967620"},{"product_id":"fresa-diamantada-pcd-z1-1-d12-i25-l74-s12-h2-5-rh","title":"PCD diamond router bit Z1+1 D12 I25 L74 S12 H2,5 RH","description":"\u003ch2\u003ePCD diamond milling cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.025.12.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead routers. The tool's design is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are mounted on a body made of steel with increased hardness (\u003e 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while a high grip accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial run-out, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is offered in both right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, which allows achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents material sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimises vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 re-sharpenings\u003c\/strong\u003e, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648681812,"sku":"DTA.12.025.12.0SR","price":39.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.025.12.0SR_DTA.025.12.0SR-108.jpg?v=1794296944"},{"product_id":"fresa-diamantada-pcd-z1-1-d12-i27-l81-s12-h2-5-rh","title":"PCD diamond router bit Z1+1 D12 I27 L81 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.027.12.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead spindle milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front insert made of carbide (HM). The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or - in selected variants - from sintered carbide monolith (HM). The thoughtfully designed cutting edge geometry ensures stable guidance in the material being processed, while the high gripping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial run-out, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip flutes prevents the workpiece from sticking and facilitates quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the tool holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specifications (height of the PCD insert):\u003c\/strong\u003e Depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and grooving.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444649599316,"sku":"DTA.12.027.12.0MR","price":101.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.027.12.0MR_DTA.12.027.12.0MR-108.jpg?v=1794296944"},{"product_id":"fresa-diamantada-pcd-z1-d12-7-i36-l91-s12-h2-5-rh","title":"PCD diamond router bit Z1 D12,7 I36 L91 S12 H2,5 RH","description":"\u003ch2\u003ePCD DTA Diamond Milling Cutter for Finish Machining of Boards and Plywood with Bearing\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.036.12.BSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is intended for formatting and finish machining on CNC centres and overhead spindle milling machines. The tool's construction is based on a diamond blade arranged on three spirals and a front plate made from sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high grip accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTemplate Guidance with Bottom Bearing:\u0026nbsp;\u003c\/strong\u003eThe built-in guide bearing located on the front part of the cutter enables precise shape copying according to a template without the risk of damaging the material's edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Area:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip flutes prevents chip adherence and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e sharpening, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e sharpening, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 times.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444649959764,"sku":"DTA.12.036.12.BSR","price":71.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.036.12.BSR_DTA.12.036.12.BSR-306.jpg?v=1793972971"},{"product_id":"fresa-diamantada-pcd-z1-1-d16-i35-l95-s16-h2-5-rh","title":"PCD diamond router bit Z1+1 D16 I35 L95 S16 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.16.035.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The edges of the DIA blades are finished directly with a laser beam, which allows achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting surface free from micro-notches.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond insert combined with deep chip channels prevents material from sticking and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from spinning in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 norm:\u003c\/strong\u003e Certified static-dynamic balancing in a strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD insert):\u003c\/strong\u003e depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening cycles\u003c\/strong\u003e, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, versions \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Range of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and rebating.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444650156372,"sku":"DTA.16.035.16.0SR","price":52.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.16.035.16.0SR_DTA.16.035.16.0SR-111.jpg?v=1791281545"},{"product_id":"fresa-diamantada-pcd-z1-1-d16-i55-l114-s16-h2-5-rh","title":"PCD diamond router bit Z1+1 D16 I55 L114 S16 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.16.055.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead milling machines. The tool’s construction is based on a diamond blade arranged on three spirals and a front carbide (HM) plate. The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high precision grip class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smooth rear part of the PCD diamond plate combined with spacious chip channels prevents material sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the grip part:\u003c\/strong\u003e The shank surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from spinning in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing according to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, and contouring.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated chipboards, MDF boards, and both raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444650844500,"sku":"DTA.16.055.16.0SR","price":78.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.16.055.16.0SR_DTA.16.055.16.0SR-108.jpg?v=1791281548"},{"product_id":"fresa-diamantada-pcd-z1-1-d18-i35-l90-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D18 I35 L90 S20 H2,5 LH","description":"\u003ch2\u003ePCD Diamond Router Bit from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.18.035.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond router bit from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for profiling and finishing processing on CNC centres and overhead spindle milling machines. The tool's design features a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of high hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtfully designed cutting edge geometry ensures stable guidance in the material being processed, while the high grip accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is available in both right and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing edge radii to reach levels of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Entry Zone:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with voluminous chip channels prevents the sticking of the material and facilitates rapid removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the router against rotation in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balance in G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) mitigates noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Insert):\u003c\/strong\u003e Depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, profile milling, and mortising operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated particle boards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651204948,"sku":"DTA.18.035.20.0SL","price":52.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.18.035.20.0SL_DTA.16.036.16.0SL-108.jpg?v=1791281550"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i55-l113-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D20 I55 L113 S20 H2,5 LH","description":"\u003ch2\u003eDiamond PCD milling cutter from the DTA series for finishing machining of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.20.055.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing machining on CNC centres and overhead spindle milling machines. The tool's construction is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high accuracy class of the grip \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, allowing edge radii to be achieved at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and leading edge zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with spacious chip channels prevents material sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter against rotation in the holder and eliminates the risk of wear on the taper in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and diminishes vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e Depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, and slotting.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651532628,"sku":"DTA.20.055.20.0SL","price":78.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.20.055.20.0SL_DTA.20.055.20.0SL-409.jpg?v=1791281552"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i72-l136-s20-h2-5-rh","title":"PCD diamond router bit Z1+1 D20 I72 L136 S20 H2,5 RH","description":"\u003ch2\u003eDiamond Milling Cutter PCD from the DTA Series for Finish Machining of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.20.072.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finish machining on CNC centres and overhead milling machines. The tool's construction is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are mounted on a body made of steel with increased hardness (\u0026gt; 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The thoughtfully designed geometry of the cutting edges ensures stable guidance in the machined material, while the high gripping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Area:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents clinging of the workpiece and facilitates rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of Gripping Part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to Standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e Depending on the height of the diamond blade used: the plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, the plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Range of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling and jointing.\u003c\/p\u003e\u003cp\u003eIt is perfectly suited for processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651696468,"sku":"DTA.20.072.20.0SR","price":120.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.20.072.20.0SR_DTA.20.075.20.0SR-111.jpg?v=1791281555"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i55-l69-s20-h2-5-rh","title":"PCD diamond router bit Z1+1 D20 I55 L69 S20 H2,5 RH","description":"\u003ch2\u003eDiamond milling cutter PCD single blade DTB PRO – for finishing machining of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTB.20.055.20.SSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the DTB\u003cstrong\u003e\u0026nbsp;PRO\u003c\/strong\u003e series is designed for high-performance formatting and finishing milling on CNC centres and overhead spindle milling machines. The tool features a single, full-sized diamond blade (PCD) arranged on three spirals with an enhanced axial angle, supported by a front drilling plate made of cemented carbide (HM). The durable body made of high-hardness steel (\u0026gt; 28 HRC) is characterised by a specially profiled geometry that facilitates the ejection of dust and debris. The ground shank in a strict accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and ensuring trouble-free operation and a high standard of edge finishing.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEnhanced axial angle and improved body design:\u003c\/strong\u003e Increased axial inclination of the blades on the spiral combined with the special geometry of the body facilitates rapid chip removal, eliminating the phenomenon of re-grinding and overheating of the cutter.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free of micro chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with capacious chip channels prevents the adhesion of debris and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank in class H6 with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimizes noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, whereas plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling and trenching.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF boards, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651729236,"sku":"DTB.20.055.20.SSR","price":81.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTB.20.055.20.SSR_DTB.20.055.20.SSR-111.jpg?v=1791281557"},{"product_id":"fresa-diamantada-pcd-z3-1-d10-i22-l70-s12-h2-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D10 I22 L70 S12 H2,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD diamond mill three-blade DTE DENSIMET® – for nesting, finishing and leveling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.10.022.12.0DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond mill from the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, cutting, contour milling and leveling of surfaces on CNC centres and overhead spindle milling machines. The design of the tool consists of three solid blades made of polycrystalline diamond (\u003cb\u003eH2.5)\u003c\/b\u003e arranged on three spirals, complemented by a diamond cutting plate that allows for effective and stable axial penetration into the material. The body made of DENSIMET® material (heavy alloy with extremely high density and vibration-damping capability) provides exceptional rigidity, vibration reduction and excellent edge finish standards.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative body based on DENSIMET®:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during cutting, resulting in longer diamond tool life and ideal workpiece surface quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGeometry of blades Z3+1 in positive or negative variant:\u003c\/strong\u003e Three solid cutting edges of polycrystalline diamond on three spirals allow for adjustment of the proper chip ejection direction (positive\/negative) depending on the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD diamond cutting plate:\u003c\/strong\u003e The tool front equipped with a PCD plate facilitates smooth, fluid and stable penetration of the mill in the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of DIA blades are finished directly with a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip channels prevents workpiece adhesion and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high-class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the applied diamond blade: a plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling and leveling (planning) operations.\u003c\/p\u003e\u003cp\u003eIt works perfectly in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651794772,"sku":"DTE.10.022.12.0DR","price":189.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.10.022.12.0DR_DTE.10.022.12.0DR-112.jpg?v=1791281560"},{"product_id":"fresa-diamantada-pcd-z3-1-d12-i20-l69-s12-h3-rh-pos-neg","title":"PCD diamond router bit Z3+1 D12 I20 L69 S12 H3 RH pos.\/neg.","description":"\u003ch2\u003eThree-blade PCD diamond cutter DTE DENSIMET® – for nesting, finishing machining, and surface levelling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.12.020.12.0DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, cutting, contour milling, and surface levelling on CNC centres and overhead spindle milling machines. The tool's construction features three solid blades made of polycrystalline diamond (\u003cb\u003eH3)\u003c\/b\u003e arranged on three spirals, complemented by a diamond front plate that allows for efficient and stable axial plunging into the material. The body made of DENSIMET® (a heavy alloy with extremely high density and vibration dampening capability) ensures outstanding rigidity, vibration reduction, and an excellent edge finishing standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® body:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during cutting, translating to longer durability of the diamond blades and ideal quality of the machined surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3+1 blade geometry in positive or negative variant:\u003c\/strong\u003e Three solid cutting edges of polycrystalline diamond on three spirals allow for matching the correct chip removal direction (positive\/negative) according to the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's front equipped with a PCD plate facilitates smooth, effortless, and stable plunging of the cutter in the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii in the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from microchipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) minimises noise and reduces vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRenewability:\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and levelling (planning) operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated MDF boards, raw and laminated particle boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444652220756,"sku":"DTE.12.020.12.0DR","price":189.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.12.020.12.0DR_DTE.12.020.12.0DR-106.jpg?v=1791281563"},{"product_id":"fresa-diamantada-pcd-z3-1-d12-i22-l70-s12-h2-5-rh-positivo","title":"PCD diamond router bit Z3+1 D12 I22 L70 S12 H2,5 RH positive","description":"\u003ch2\u003eThree-blade PCD diamond cutter DTE DENSIMET® – for nesting, finishing and flattening\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTE.12.022.12.2DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the DTE\u003cstrong\u003e\u0026nbsp;DENSIMET®\u003c\/strong\u003e series is designed for efficient nesting, contour cutting, milling and flattening on CNC machines and spindle milling machines. The tool's construction consists of three full blades made of polycrystalline diamond (\u003cb\u003eH2.5)\u003c\/b\u003e arranged on three spirals, complemented by a diamond front plate that allows for smooth and stable axial immersion into the material. The body made from DENSIMET® material (heavy alloy with exceptionally high density and vibration-damping capability) ensures outstanding rigidity, vibration reduction and excellent edge finish quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eInnovative DENSIMET® based body:\u003c\/strong\u003e The use of heavy metals with high density effectively dampens vibrations during machining, resulting in longer tool life for diamond blades and ideal surface quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive or negative Z3+1 blade geometry:\u003c\/strong\u003e Three full cutting edges made of polycrystalline diamond on three spirals allow for the appropriate chip ejection direction (positive\/negative) depending on the material specifics and edge requirements.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool face equipped with a PCD plate facilitates smooth, fluid and stable penetration of the cutter into the Z-axis during nesting and drilling operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, allowing edge radii as small as \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed backside of the PCD diamond plate combined with spacious chip channels prevents material build-up and improves rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding possibility:\u003c\/strong\u003e depending on the height of the diamond blade applied: a plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling and flattening (planing) operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated particle board, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444652646740,"sku":"DTE.12.022.12.2DR","price":193.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.12.022.12.2DR_DTE.12.022.12.2DR-102.jpg?v=1791281565"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i25-l86-s16-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I25 L86 S16 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Edge DTE.TURBO – for finishing, formatting, and mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.025.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC centres and overhead spindle milling machines. The tool's construction consists of three solid blades made of polycrystalline diamond\u003cb\u003e H4 and\u003c\/b\u003e\u0026nbsp;a diamond front insert that allows for efficient and stable axial penetration into the material. The body, made from selected stainless steel, offers high stiffness and resistance to thermal and mechanical loads. The ground shank in the precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finishing standard. The cutter is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The three cutting edges made of polycrystalline diamond mounted on a stainless steel body ensure high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front insert:\u003c\/strong\u003e The tool's front equipped with a PCD insert facilitates effortless, smooth, and stable penetration of the cutter along the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting face free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and rake face:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with deep chip channels prevents workpiece adhesion and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the diamond blade used: the insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, the insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables regrinding up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for regrinding up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while the inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable regrinding up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling (formatting), and mortising.\u003c\/p\u003e\u003cp\u003eIt works excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated particle board, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444653072724,"sku":"DTE.16.025.16.0SR","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.025.16.0SR_DTE.16.025.16.0SR-104.jpg?v=1791281566"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i25-l85-s16-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I25 L85 S16 H4 RH pos.\/neg.","description":"\u003ch2\u003eThree-Blade PCD Diamond Cutter DTE TURBO NESTING – for nesting, finishing processing, and formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.025.16.NSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE TURBO NESTING\u003c\/strong\u003e series is designed for efficient nesting, cutting, and finishing processing on CNC centres and overhead spindle milling machines. The tool's structure comprises three full blades made of polycrystalline diamond \u003cb\u003eH4\u003c\/b\u003e arranged on three spirals, and a diamond front plate that allows stable axial penetration into the material. The body, made of selected stainless steel, offers high rigidity and resistance to thermal and mechanical loads. The ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle's bearing system and ensuring an excellent edge finish standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThree full blades on a stainless steel body:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body ensures high cutting efficiency, high feed rates, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The front of the tool equipped with a PCD plate facilitates smooth, easy, and stable downward movement of the cutter along the Z-axis during nesting operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii in the range of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip channels prevents chip adhesion and enhances rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static and dynamic balancing in the strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and diminishes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e Depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 re-sharpenings\u003c\/strong\u003e, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e permits sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF boards, raw and laminated particle boards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444653465940,"sku":"DTE.16.025.16.NSR","price":141.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.025.16.NSR_DTE.16.025.16.NSR-104.jpg?v=1791281571"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i35-l97-s16-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I35 L97 S16 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD three-wing diamond cutter DTE.TURBO – for finishing, formatting and groove machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.035.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting and finishing on CNC machines and overhead spindle milling machines. The tool's construction features three solid blades made of polycrystalline diamond\u003cb\u003e H4 and\u003c\/b\u003e\u0026nbsp;a diamond cutting insert that enables efficient and stable axial immersion into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finishing standard. The cutter is available in right-hand and left-hand versions.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDiamond PCD cutting insert:\u003c\/strong\u003e The tool's tip equipped with a PCD insert facilitates free, smooth and stable engagement of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing edge radii to be achieved at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-nicks.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents the sticking of machined material and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and mitigates vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling (formatting) and groove machining operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444653990228,"sku":"DTE.16.035.16.0SR","price":236.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.035.16.0SR_DTE.16.035.16.0SR_N-112.jpg?v=1791281571"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i40-l93-s16-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I40 L93 S16 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Flute DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.040.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC machining centres and overhead milling machines. The tool's structure consists of three full blades made of polycrystalline diamond\u003cb\u003e H4 and\u003c\/b\u003e a diamond tip that allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finish standard. The cutter is offered in both right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Diamond Tip:\u003c\/strong\u003e The tool's face equipped with a PCD tip facilitates smooth, free, and stable axial penetration of the cutter in the Z axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Processing (Ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Angle:\u003c\/strong\u003e The smooth rear part of the PCD diamond tip combined with ample chip flutes prevents material buildup and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the collet and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e Depending on the height of the diamond tip used: tip \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, tip \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for \u003cstrong\u003eup to 2–3 regrinds\u003c\/strong\u003e, options \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for \u003cstrong\u003eup to 3–4 regrinds\u003c\/strong\u003e, while tips \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for \u003cstrong\u003eup to 4–6 regrinds\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling (formatting), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444655300948,"sku":"DTE.16.040.16.0SR","price":267.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.040.16.0SR_DTE.16.040.16.0SR-102.jpg?v=1791281574"},{"product_id":"fresa-diamantada-pcd-z3-1-d16-i45-l102-s16-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D16 I45 L102 S16 H4,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-edge PCD Diamond Mill DTE.TURBO – for finishing, formatting and profiling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.16.045.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond mill from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC machines and overhead milling machines. The tool's structure consists of three solid edges made of polycrystalline diamond \u003cb\u003eH4.5 and\u003c\/b\u003e a diamond front plate that allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank, manufactured to a precise tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e, eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finishing standard. The mill is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's front, equipped with a PCD plate, facilitates free, smooth, and stable insertion of the mill in the Z axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip grooves prevents material sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a tight class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) mitigates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the applied diamond edge: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and field of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, contour milling (formatting), and profiling.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444655530324,"sku":"DTE.16.045.16.0SR","price":315.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.16.045.16.0SR_DTE.16.045.16.0SR-106.jpg?v=1791281577"},{"product_id":"fresa-diamantada-pcd-z3-1-d18-i25-l87-s20-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D18 I25 L87 S20 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD diamond milling cutter three-flute DTE.TURBO – for finishing, formatting and mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.18.025.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing on CNC centres and overhead milling machines. The tool features three full blades made of polycrystalline diamond\u003cb\u003e H4 and\u003c\/b\u003e\u0026nbsp;a diamond front plate that allows for efficient and stable axial penetration into the material. The body, made from selected stainless steel, offers high rigidity and resistance to thermal and mechanical loads. The ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent standard of edge finishing. The cutter is available in both right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting performance, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's front equipped with a PCD plate facilitates smooth, fluid, and stable penetration of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting edge zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents debris from sticking and improves quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the applied diamond blade: the blade \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2\u003c\/strong\u003e sharpenings, the blade \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, whilst blades \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling (formatting), and mortising.\u003c\/p\u003e\u003cp\u003eIt performs excellently when processing materials such as: raw and laminated MDF board, raw and laminated particleboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444655989076,"sku":"DTE.18.025.20.0SR","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.18.025.20.0SR_DTE.18.025.20.0SR-112.jpg?v=1791281580"},{"product_id":"fresa-diamantada-pcd-z3-1-d18-i35-l98-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D18 I35 L98 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-Edge PCD Diamond Cutting Tool DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.18.035.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC centres and overhead milling machines. The tool's structure consists of three full edges made from polycrystalline diamond \u003cb\u003eH4.5 and\u003c\/b\u003e a diamond face plate, which allows for efficient and stable axial penetration into the material. The body made from selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial run-out, protecting the spindle's bearing system and guaranteeing an excellent edge finishing standard. The cutter is available in both right and left-hand variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made from polycrystalline diamond mounted on a stainless steel body ensures high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD face plate:\u003c\/strong\u003e The tool face equipped with a PCD plate facilitates smooth and stable axial penetration in the Z axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip channels prevents material adhesion and facilitates fast removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the tool holder:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from spinning in the holder and eliminates the risk of wearing out the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and lowers vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables maximum \u003cstrong\u003e2–3 sharpenings\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 sharpenings\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 sharpenings\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and area of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444661100884,"sku":"DTE.18.035.20.0SR","price":236.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.18.035.20.0SR_DTE.18.035.20.0SR-102.jpg?v=1791281582"},{"product_id":"fresa-diamantada-pcd-z3-1-d18-i45-l108-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D18 I45 L108 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD three-blade diamond cutter DTE.TURBO – for finishing, formatting and grooving work\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.18.045.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing work on CNC centres and overhead spindle milling machines. The tool design features three full edges made of H4,5 polycrystalline diamond and a diamond cutting plate that enables efficient and stable axial penetration into the material. The body made of selected stainless steel offers high stiffness and resistance to thermal and mechanical loads. The ground shank in the precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent standard of edge finishing. The cutter is available in both right-handed and left-handed versions.\u003c\/p\u003e\u003ch3\u003eDesign strengths and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high machining efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD cutting plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates free, smooth, and stable entry of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e Cutting edge profiles are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting face area:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with large chip channels prevents debris from sticking and facilitates rapid dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface has a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, preventing the cutter from rotating in the holder and eliminating the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond blade used: the plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e, the plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, the variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while the plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444661625172,"sku":"DTE.18.045.20.0SR","price":283.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.18.045.20.0SR_DTE.18.045.20.0SR-102.jpg?v=1791281585"},{"product_id":"fresa-diamantada-pcd-z3-1-d20-i45-l110-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D20 I45 L110 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003eThree-edge PCD diamond cutter DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.20.045.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance formatting, cutting, and finishing operations on CNC centres and overhead milling machines. The tool's construction consists of three full blades made of polycrystalline diamond\u003cb\u003e H4.5 and\u003c\/b\u003e\u0026nbsp;a diamond cutting insert, which enables efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring an excellent edge finishing standard. The cutter is available in both right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean edges of the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD cutting insert:\u003c\/strong\u003e The tool's face equipped with a PCD insert facilitates smooth, fluid, and stable axial engagement of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, achieving edge radii of approximately \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes and leading edge area:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with voluminous chip channels prevents the sticking of chips and facilitates quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in an extremely strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimises vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration possibility:\u003c\/strong\u003e depending on the height of the diamond blade applied: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling (formatting), and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated MDF board, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444661854548,"sku":"DTE.20.045.20.0SR","price":306.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.20.045.20.0SR_DTE.20.045.20.0SR-112.jpg?v=1794296946"},{"product_id":"fresa-diamantada-pcd-z3-1-d25-i25-l89-s20-h4-5-rh-pos-neg","title":"PCD diamond router bit Z3+1 D25 I25 L89 S20 H4,5 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond Milling Cutter Three-Edge DTE.TURBO – for finishing, formatting and mortising\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.25.025.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e\u0026nbsp;series is designed for high-performance formatting, cutting, and finishing operations on CNC machining centres and overhead milling machines. The tool's construction consists of three solid cutting edges made of polycrystalline diamond\u003cb\u003e H4.5 and\u003c\/b\u003e\u0026nbsp;a diamond face plate, which allows for efficient and stable axial immersion into the material. The body made of selected stainless steel offers high stiffness and resistance to thermal and mechanical loads. The ground shank with a precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle's bearing system and ensuring an excellent edge finish standard. The cutter is offered in right and left variants.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD Face Plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates smooth, fluid, and stable immersion of the cutter in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Treatment (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing edge radii down to \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Area:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip flutes prevents chip adhesion and enhances quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standards:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding Possibility:\u003c\/strong\u003e Depending on the height of the diamond blade used: the \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e plate allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, the \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e plate enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, the variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while the plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, peripheral milling (formatting), and mortising operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444662247764,"sku":"DTE.25.025.20.0SR","price":157.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.25.025.20.0SR_DTE.25.025.20.0SR-101.jpg?v=1794296946"},{"product_id":"fresa-diamantada-pcd-z3-1-d25-i45-l112-s20-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D25 I45 L112 S20 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Diamond End Mill Three-Flute DTE.TURBO – for finishing, formatting, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.25.045.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond end mill from the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is intended for high-efficiency formatting, cutting, and finishing operations on CNC machines and overhead milling machines. The tool's design features three solid blades made of polycrystalline diamond \u003cb\u003eH4 and\u003c\/b\u003e a diamond front plate that allows for efficient and stable axial immersion into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent edge finish standard. The end mill is available in right-hand and left-hand variants.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool head equipped with a PCD plate facilitates free, smooth, and stable immersion of the end mill in the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser edge treatment (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents material buildup and enhances quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the end mill against rotation in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balance in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, peripheral milling (formatting), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as raw and laminated MDF boards, raw and laminated chipboard, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444665065812,"sku":"DTE.25.045.20.0SR","price":306.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.25.045.20.0SR_DTE.25.045.20.0SR-109.jpg?v=1794296949"},{"product_id":"fresa-diamantada-pcd-z3-1-d25-i65-l131-s25-h4-rh-pos-neg","title":"PCD diamond router bit Z3+1 D25 I65 L131 S25 H4 RH pos.\/neg.","description":"\u003ch2\u003ePCD Three-Edge Diamond Cutter DTE.TURBO – for finishing, profiling, and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e DTE.25.065.25.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter of the \u003cstrong\u003eDTE.TURBO\u003c\/strong\u003e series is designed for high-performance profiling, cutting, and finishing on CNC machining centres and overhead milling machines. The tool's construction features three solid polycrystalline diamond blades \u003cb\u003eH4 and\u003c\/b\u003e a diamond front plate that allows for efficient and stable axial penetration into the material. The body made of selected stainless steel offers high rigidity and resistance to thermal and mechanical loads. The ground shank in precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finishing standard. The cutter is available in right and left variants.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDesign:\u003c\/strong\u003e The arrangement of three cutting edges made of polycrystalline diamond fixed on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD front plate:\u003c\/strong\u003e The tool's face equipped with a PCD plate facilitates free, smooth, and stable penetration of the cutter along the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smooth back part of the PCD diamond plate combined with capacious chip channels prevents workpiece adhesion and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in norm G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the high class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimises vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e Depending on the height of the applied diamond blade: the plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpenings\u003c\/strong\u003e, the plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling (profiling), and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444668440916,"sku":"DTE.25.065.25.0SR","price":420.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTE.25.065.25.0SR_dte.25.065.25.0sr-103.jpg?v=1794296949"},{"product_id":"fresa-diamantada-recta-pcd-z2-d12-i15-l73-s12-h3-rh","title":"PCD straight diamond router bit Z2 D12 I15 L73 S12 H3 RH","description":"\u003ch2\u003ePCD Diamond End Mill DT2 – for precise finishing and formatting machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue index:\u003c\/strong\u003e\u0026nbsp;DT2.12.015.12.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond end mill from the \u003cstrong\u003eDT2\u003c\/strong\u003e series features two full PCD diamond blades H3 mm, designed for highly efficient formatting and finishing machining on spindle mills and CNC machines. The tool's structure consists of a stable body made of sintered carbide HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of rigidity, while the precise clamping tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively eliminates radial run-out, protecting the spindle bearings and ensuring ideal edge finishing.\u003c\/p\u003e\u003ch3\u003eKey features and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-sharpened cutting edges (ablation):\u003c\/strong\u003e The DIA blades are finished using a laser beam, resulting in perfectly sharp profiles with a minimal cutting radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip area and cutting edge:\u003c\/strong\u003e The smooth back edge of the PCD diamond insert, combined with spacious chip flutes, prevents material from sticking and facilitates chip evacuation from the working area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the shank:\u003c\/strong\u003e The shank has a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, preventing slippage of the end mill in the tool holder and counteracting wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Attention to static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of the PCD insert):\u003c\/strong\u003e The insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, notching, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444668932436,"sku":"DT2.12.015.12.0MR","price":138.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.12.015.12.0MR_DT2.12.015.12.0MR-102.jpg?v=1793967605"},{"product_id":"fresa-diamantada-recta-pcd-z2-d9-i21-l71-5-s10-h2-5-rh","title":"PCD straight diamond router bit Z2 D9 I21 L71,5 S10 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter Dual Blade DT2 – for Precise Finishing and Shaping\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue Index:\u003c\/strong\u003e\u0026nbsp;DT2.09.021.10.2MR\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDT2\u003c\/strong\u003e series equipped with two full PCD diamond blades H2.5 mm, designed for highly efficient shaping and finishing on overhead milling machines and CNC machining centres. The tool's construction comprises a stable body made of sintered carbide monolith HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of stiffness, while the precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively mitigates radial runout, protecting the spindle bearings and guaranteeing a perfect edge finish.\u003c\/p\u003e\u003ch3\u003eKey Properties and Technical Specification:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-Sharpened Cutting Edges (Ablation):\u003c\/strong\u003e The DIA blades have been finished using a laser beam, resulting in perfectly sharp profiles with a minimal cutting edge radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Area and Cutting Edge:\u003c\/strong\u003e The smoothed rear edge of the PCD diamond insert combined with extensive chip flutes prevents material build-up and facilitates chip evacuation from the work area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Grip Surface Roughness:\u003c\/strong\u003e Grip with a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from slipping in the tool holder and counters the wear of the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Attention to static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Insert):\u003c\/strong\u003e The insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, grooving, and slotting operations.\u003c\/p\u003e\u003cp\u003eIt performs exceptionally well in processing materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444669161812,"sku":"DT2.09.021.10.2MR","price":132.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.09.021.10.2MR_DT2.09.021.10.2MR-110.jpg?v=1791281606"},{"product_id":"fresa-diamantada-recta-pcd-z2-d8-i15-l70-s8-h3-rh","title":"PCD straight diamond router bit Z2 D8 I15 L70 S8 H3 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter Dual-Edged DT2 – for Precision Finishing and Formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue Number:\u003c\/strong\u003e\u0026nbsp;DT2.08.015.08.0MR\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDT2\u003c\/strong\u003e series equipped with two full PCD diamond cutting edges H3 mm, designed for highly efficient formatting and finishing machining on overhead spindle milling machines and CNC machining centres. The tool's construction features a stable body made of sintered tungsten carbide HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of rigidity, and the precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively eliminates radial runout, protecting the spindle bearings and guaranteeing perfect edge finishing.\u003c\/p\u003e\u003ch3\u003eKey properties and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-Sharpened Cutting Edges (Ablation):\u003c\/strong\u003e The DIA blades have been finished using a laser beam, enabling the achievement of perfectly sharp profiles with a minimum cutting edge radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Area and Cutting Edge:\u003c\/strong\u003e The smoothed rear edge of the PCD diamond insert, combined with ample chip flutes, prevents chip sticking and facilitates chip evacuation from the working area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Surface Roughness of the Shank:\u003c\/strong\u003e The shank with a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents slippage of the cutter in the tool holder and counteracts wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Care for static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Insert):\u003c\/strong\u003e Insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, and insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, grooving, and slotting.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444669620564,"sku":"DT2.08.015.08.0MR","price":110.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.08.015.08.0MR_DT2.08.015.08.0MR-106.jpg?v=1791281607"},{"product_id":"fresa-diamantada-recta-pcd-z2-d6-i10-l75-s12-h2-5-rh","title":"PCD straight diamond router bit Z2 D6 I10 L75 S12 H2,5 RH","description":"\u003ch2\u003eDT2 PCD Diamond Milling Cutter – for Precise Finishing and Formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue index:\u003c\/strong\u003e\u0026nbsp;DT2.06.010.12.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDT2\u003c\/strong\u003e series is equipped with two full diamond PCD blades H2.5 mm, designed for highly efficient formatting and finishing machining on overhead spindle milling machines and CNC machines. The tool's construction features a stable body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond plates are embedded. The use of a hard alloy in the shank guarantees a high level of stiffness, while the precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively eliminates radial runout, protecting the spindle bearings and ensuring perfect edge finishing.\u003c\/p\u003e\u003ch3\u003eKey properties and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser sharpened cutting edges (ablation):\u003c\/strong\u003e The DIA blades are finished using a laser beam, allowing for perfectly sharp profiles with a minimal cutting radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip area and cutting edge:\u003c\/strong\u003e The smoothed rear edge of the PCD diamond plate combined with extensive chip channels prevents material build-up and facilitates chip evacuation from the work area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the shank:\u003c\/strong\u003e The shank with a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents slippage of the cutter in the tool holder and counteracts wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Care for static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and generated noise during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e The plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the plate \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, notching, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444669915476,"sku":"DT2.06.010.12.0MR","price":132.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.06.010.12.0MR_DT2.06.010.12.0MR-107.jpg?v=1791281608"},{"product_id":"fresa-diamantada-pcd-z1-1-d12-i45-l100-s12-h2-5-rh","title":"PCD diamond router bit Z1+1 D12 I45 L100 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond End Mill from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.045.12.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond end mill from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing work on CNC centres and overhead spindle mills. The tool's design is based on a diamond blade arranged on three spirals and a frontal insert made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the material being processed, while the high accuracy class of the grip \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and ensuring excellent edge finish quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, which allows for achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting plane free from micro-nicks.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with voluminous chip channels prevents workpiece sticking and facilitates rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of taper wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of the PCD insert):\u003c\/strong\u003e Depending on the height of the diamond blade used: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-times\u003c\/strong\u003e sharpening, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444695408980,"sku":"DTA.12.045.12.0SR","price":65.57,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.045.12.0SR_DTA.12.045.12.0SR-109.jpg?v=1791281735"},{"product_id":"fresa-diamantada-pcd-z1-1-d16-i45-l105-s16-h2-5-lh","title":"PCD diamond router bit Z1+1 D16 I45 L105 S16 H2,5 LH","description":"\u003ch2\u003eDiamond PCD cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.16.045.16.0SL\u003c\/p\u003e\u003cp\u003eIndustrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series designed for formatting and finishing processing on CNC centres and overhead milling machines. The tool design is based on a diamond blade arranged on three spirals and a frontal insert made of sintered carbide (HM). The blades are mounted on a body made of steel with increased hardness (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high gripping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is offered in right and left rotations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e DIA edge profiles are finished directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting face free of micro-chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond insert combined with capacious chip channels prevents the workpiece from sticking and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shaft surface with a roughness index \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD insert):\u003c\/strong\u003e depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling and notching operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated particle boards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444695998804,"sku":"DTA.16.045.16.0SL","price":65.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.16.045.16.0SL_DTA.16.045.16.0SL-108.jpg?v=1791281738"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i35-l95-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D20 I35 L95 S20 H2,5 LH","description":"\u003ch2\u003eDiamond cutter PCD from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.20.035.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is intended for formatting and finishing processing on CNC centres and overhead spindle milling machines. The tool's design is based on a diamond blade arranged on three spirals and a frontal plate made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). Thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high accuracy class of the grip \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical characteristics:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, which allows for achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry area:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip channels prevents the sticking of the cut material and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the grip part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from spinning in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and diminishes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecification of sharpening (height of PCD plate):\u003c\/strong\u003e depending on the height of the employed diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows \u003cstrong\u003e2-times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, and notching.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444696064340,"sku":"DTA.20.035.20.0SL","price":52.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.20.035.20.0SL_DTA.20.035.20.0SL-111.jpg?v=1791281742"},{"product_id":"fresa-diamantada-pcd-z2-1-d16-i35-l94-s16-h2-5-rh","title":"PCD diamond router bit Z2+1 D16 I35 L94 S16 H2,5 RH","description":"\u003ch2\u003ePCD diamond cutter from the DTN Z2+1 series – for finishing, nesting, and formatting processes\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTN.16.035.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTN\u003c\/strong\u003e group has been designed for specialised formatting, nesting, and precision finishing operations on overhead-spindle milling machines and CNC centres. The tool features a blade arrangement \u003cstrong\u003eZ2+1 -\u0026nbsp;\u003c\/strong\u003e\u0026nbsp;where polycrystalline diamond (PCD) inserts are placed on four cutting spirals, supported by a cemented carbide (HM) front insert. The cutter's body is made of high-hardness steel (\u003e 28 HRC). This construction enhances the efficient elimination of dust, while the ground shank with a tight tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e minimises radial runout, protecting the spindle bearings and ensuring excellent edge condition after machining.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2+1 geometry based on four spirals:\u003c\/strong\u003e A configuration that provides high cutting efficiency and an excellent standard of surface finish while maintaining great work stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the cutting edges are finished directly by a laser beam, allowing for edge radii as low as \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with spacious chip channels prevents the material from sticking and facilitates rapid dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the diamond insert used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 regrinds\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 regrinds\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 regrinds\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt works exceptionally well in processing materials such as: raw and laminated MDF boards, raw and laminated chipboards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444697080148,"sku":"DTN.16.035.16.0SR","price":103.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTN.16.035.16.0SR_DTN.16.035.16.0SR-105.jpg?v=1791281746"},{"product_id":"fresa-diamantada-pcd-z2-2-d12-i25-l78-s12-h2-5-rh","title":"PCD diamond router bit Z2+2 D12 I25 L78 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter from the DTN Z2+2 Series – for Finishing, Nesting, and Formatting Operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTN.12.025.12.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTN\u003c\/strong\u003e\u0026nbsp;group has been designed for specialised formatting, nesting, and precise finishing operations on overhead spindle milling machines and CNC centres. The tool features a \u003cstrong\u003eZ2+2\u0026nbsp;\u003c\/strong\u003eblade arrangement, with polycrystalline diamond (PCD) inserts placed on four cutting spirals, supported by a front insert made of sintered carbide (HM). The cutter's shaft is made of high-hardness steel (\u0026gt; 28 HRC). This design facilitates the free removal of dust, while the ground shank with a close tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting spindle bearings and ensuring an excellent edge condition after machining.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2+2 Geometry based on Four Spirals:\u003c\/strong\u003e A configuration that provides high cutting efficiency and an excellent finishing standard for the material's surface while maintaining great work stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Processing (Ablation):\u003c\/strong\u003e The blade profiles are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Cutting Edge Zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents material build-up and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank has a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, securing the cutter against rotation in the holder and eliminating the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration Capability:\u003c\/strong\u003e Depending on the height of the diamond insert used: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 re-sharpenings\u003c\/strong\u003e, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variations of \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently when machining materials such as: raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444697571668,"sku":"DTN.12.025.12.0SR","price":78.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTN.12.025.12.0SR_DTN.12.025.12.0SR-110.jpg?v=1791281749"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i80-l138-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D20 I80 L138 S20 H2,5 LH","description":"\u003ch2\u003ePCD diamond milling cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.20.080.20.0SL\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series intended for formatting and finishing machining on CNC centres and overhead milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are mounted on a body made of high hardness steel (\u0026gt; 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The well-designed cutting edge geometry ensures stable guidance in the workpiece, while the high gripping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser machining of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, which allows for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents adhesion of the cut material and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of wear at the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e Depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2-3 times\u003c\/strong\u003e sharpening, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3-4 times\u003c\/strong\u003e sharpening, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4-6 times\u003c\/strong\u003e sharpening.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444697899348,"sku":"DTA.20.080.20.0SL","price":168.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.20.080.20.0SL_DTA.20.080.20.0SL-111.jpg?v=1791281751"},{"product_id":"fresa-diamantada-pcd-z1-1-d18-i25-l80-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D18 I25 L80 S20 H2,5 LH","description":"\u003ch2\u003ePCD Diamond Milling Cutter from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.18.025.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead spindle milling machines. The tool's design is based on a diamond blade arranged on three spirals and a frontal plate made of hard metal (HM). The blades are mounted on a body made of high hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high precision class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in right and left rotation.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The edges of the DIA blades are finished directly with a laser beam, allowing edge radii to be achieved at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from microchipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Grooves and Rake Face:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with ample chip channels prevents material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the tight class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of the PCD Plate):\u003c\/strong\u003e depending on the height of the diamond blade used: a plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpenings\u003c\/strong\u003e, a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for operations like cutting, contour milling, and mortising.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444703830356,"sku":"DTA.18.025.20.0SL","price":39.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.18.025.20.0SL_DTA.18.025.20.0SL-101.jpg?v=1791281757"},{"product_id":"fresa-diamantada-pcd-z2-2-d20-i55-l113-s20-h2-5-rh","title":"PCD diamond router bit Z2+2 D20 I55 L113 S20 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter from the DTN Z2+2 Series – for Finishing, Nesting, and Formatting Operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTN.20.055.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTN\u003c\/strong\u003e\u0026nbsp;group has been designed for specialised formatting, nesting, and precise finishing operations on overhead spindle milling machines and CNC centres. The tool employs a blade arrangement of \u003cstrong\u003eZ2+2 -\u0026nbsp;\u003c\/strong\u003epolycrystalline diamond (PCD) tips distributed over four working spirals, supported by a front tip made of sintered carbide (HM). The cutter's body is constructed from high-hardness steel (\u003e 28 HRC). This design facilitates free dust removal, while the ground shank in a tight tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearings and ensuring excellent edge condition after machining.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2+2 Geometry based on Four Spirals:\u003c\/strong\u003e A configuration that provides high cutting efficiency and an excellent surface finish standard while maintaining great work stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Treatment (Ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting face free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Flute and Rake Face:\u003c\/strong\u003e The smoothed rear part of the PCD diamond tip combined with capacious flutes prevents material from sticking and enhances rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The shank surface has a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, securing the cutter against spinning in the holder and eliminating the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding Capability:\u003c\/strong\u003e Depending on the height of the diamond tip used: tip \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, tip \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables a maximum of \u003cstrong\u003e2–3 regrinds\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 regrinds\u003c\/strong\u003e, while tips \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable regrinding up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, peripheral milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated MDF boards, raw and laminated chipboards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444719460692,"sku":"DTN.20.055.20.0SR","price":152.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTN.20.055.20.0SR_DTN.20.055.20_320a05ab-e02a-423a-acb0-e67d17ba03ff.jpg?v=1793969146"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d12-i15-l66-s12-h3-rh","title":"PCD straight diamond router bit Z2+1 D12 I15 L66 S12 H3 RH","description":"\u003ch2\u003ePCD diamond milling cutter with drilling blade DTS – for nesting and finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.12.015.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3\u003c\/strong\u003e). The blades are mounted on a sintered carbide monolith body with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from the heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten alloy that dampens vibrations during cutting). The compression layout protects the laminate from chipping edges from above and below, while the diamond front plate ensures smooth entry of the tool into the material in the Z-axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser edge treatment (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip channels prevents clogging and facilitates rapid dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shaft surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standards:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and decreases vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with the plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, peripheral milling, mortising, slotting, and plunging into the material.\u003c\/p\u003e\u003cp\u003eIt works excellently in the processing of materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444719984980,"sku":"DTS.12.015.12.0DR","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.12.015.12.0DR_DTS.12.015.12.0DR-108.jpg?v=1791281823"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/collections\/e84192d0-4cf4-4029-816b-4cc9091fd048.jpg?v=1793780684","url":"https:\/\/es.ita.tools\/en\/collections\/herramientas-pcd-y-hm.oembed","provider":"ITA TOOLS","version":"1.0","type":"link"}