{"title":"PCD and solid carbide tools for composites","description":"\u003ch2\u003ePCD \u0026amp; VHM Router Bits for Composites, Aluminum, and Plastics – Advanced CNC Machining\u003c\/h2\u003e\u003cp\u003eProcessing composite materials, light metals, and technical plastics places completely different demands on cutting tools than conventional furniture manufacturing. To eliminate the risk of edge melting, layer delamination, or rapid edge dulling, ITA TOOLS has created a dedicated range of \u003cstrong\u003ediamond (PCD) and solid carbide (VHM) router bits for composites\u003c\/strong\u003e. This high-tech tooling is engineered to manage complex waste and maintain total dimensional consistency in demanding processes.\u003c\/p\u003e\u003ch3\u003eApplication and Material Compatibility\u003c\/h3\u003e\u003cp\u003eThe construction and cutting angles of the tools in this group have been developed for precision cutting, slotting, folding, and sizing in advanced industrial materials:\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSandwich \u0026amp; architectural composites:\u003c\/strong\u003e Alucobond, Reynobond, and Dibond type panels (including V-grooving bits for 90° and 135° bends).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFibrous composites:\u003c\/strong\u003e glass-reinforced plastics (GRP) and carbon fiber reinforced polymers (CFRP).\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHard \u0026amp; mineral laminates:\u003c\/strong\u003e high-pressure HPL boards, Corian®, phenolic materials, and fiber-cement boards.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSoft metals \u0026amp; plastics:\u003c\/strong\u003e aluminum, PVC window profiles, acrylic (plexiglass), technical foams, and polycarbonates.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eOverview of Specific Geometries\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eVHM multiedge rasp\/router bits:\u003c\/strong\u003e Equipped with a dense, alternating cross-cut edge structure. They are insubstitutable in the machining of glass and carbon fiber composites. They act like a file – instead of pulling long fibers, they shred the waste into fine dust, eliminating edge fraying and delamination.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-flute router bits (Z=1) for aluminum and plastics:\u003c\/strong\u003e These feature a single ultra-sharp, smooth, spiral cutting edge and a deep, polished chip evacuation flute. This design ensures immediate chip ejection, preventing the tool from clogging and stopping acrylic or PVC edges from melting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eProfile PCD diamond router bits:\u003c\/strong\u003e Tools for chamfering, edge rounding, or making folding grooves (V-grooving) in composite panels. Brazed diamond tips on heavy, vibration-damping bodies (e.g., Densimet®) guarantee an industrial tool life.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e💡 \u003cstrong\u003eFind the tool right for your production:\u003c\/strong\u003e Use filters to instantly narrow down the product view. Select the application of the bit (for aluminum \/ for composites \/ for HPL), the cutting diameter, and the type of construction (rasp \/ spiral \/ profile) to perfectly adapt the parameters of the tool to the planned machining.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions – FAQ\u003c\/h2\u003e\u003ch3\u003e1. What is composite delaminating and how can it be prevented?\u003c\/h3\u003e\u003cp\u003eDelamination is a highly critical phenomenon where the sequential layers of a composite separate (e.g., glass mat peeling away from resin or aluminum debonding from the core in Dibond panels) under the influence of cutting forces. To prevent it, tools with a special geometry must be used. The VHM multiedge rasp bits from ITA TOOLS do not exert an axial force that pulls the material up or down – instead, they gently grind the edge structure, guaranteeing total cohesion of the composite.\u003c\/p\u003e\u003ch3\u003e2. Why should single-flute bits (Z=1) be used for plexiglass and PVC instead of multiedge bits?\u003c\/h3\u003e\u003cp\u003eTechnical plastics like acrylic (plexiglass) or PVC have a low melting point. A conventional multiedge router bit generates too much friction, causing chips to melt and re-weld behind the tool, destroying the edge. Single-flute bits (Z=1) in positive execution feature a high-capacity polished spiral channel that immediately ejects a large, thick chip, effectively dissipating heat from the cutting zone and leaving the edge perfectly transparent or smooth.\u003c\/p\u003e\u003ch3\u003e3. When is it better to opt for solid carbide (VHM) or diamond (PCD) when working with composites?\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eChoose solid carbide (VHM):\u003c\/strong\u003e For machining aluminum, flexible technical plastics, and in projects requiring very small bit diameters (e.g., 2-4 mm). VHM offers higher elasticity and resistance to breakage when working with ductile materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eChoose diamond (PCD):\u003c\/strong\u003e For highly abrasive materials that quickly dull carbide, such as HPL boards, fiberglass, carbon fiber, or fiber-cement panels. On these components, PCD diamond on Densimet® bodies maintains micro-sharpness for a long period, ensuring the lowest cost per linear meter of cut.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003e4. What router bits are used for composite panel folding technology (V-Grooving)?\u003c\/h3\u003e\u003cp\u003eTo prepare panels like Dibond or Alucobond for subsequent manual bending, special VHM or PCD profile bits with cutting angles of 90° or 135° are used. These tools are designed to mill a precise V-shaped groove, removing the back layer of aluminum and the internal polyethylene core, leaving only the front decorative aluminum layer intact. This guarantees a perfect, straight bending line on facades without cracks in the material.\u003c\/p\u003e","products":[{"product_id":"cuchilla-para-plotter-i7-4-l25-s5-65-t0-63","title":"Flat knife ITA16 \/ Zund Z16 \/ 3910306 \/ Esko BLD-SF216 (i-216) \/ G42441212 \/ Bullmer B16 \/ Colex T00418 \/ iEcho E16 \/ Mecanumeric 100610440 \/ I=7.4 L=25 S=5.65","description":"\u003ch1\u003eCutter knife for cutting plotter\u003c\/h1\u003e\u003cp\u003eIndex: ITA.16\u003c\/p\u003e\u003cp\u003eIndustrial blade for cutting plotters dedicated to precise cutting, scoring and die-cutting of various flexible materials and technical substrates. The tool is made of high-quality sintered carbide with increased wear resistance, which guarantees long life and the maintenance of ideal cutting edge sharpness during intensive use. The precise grinding ensures a clean cutting line without fraying the material edge, reducing cutting resistance and optimising the die-cutting process on CNC machines. The knife is fully compatible with standard cutting heads used in professional industrial plotters.\u003c\/p\u003e\u003ch3\u003eKey technical parameters and properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHigh-quality sintered carbide:\u003c\/strong\u003e The use of high hardness material ensures wear resistance and long-lasting cutting edge stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePrecise blade geometry:\u003c\/strong\u003e Dedicated grinding guarantees a perfectly clean cutting edge and repeatability of operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReduction of cutting resistance:\u003c\/strong\u003e Optimised blade angle reduces cutting forces, preventing shifting and wrinkling of the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWide compatibility:\u003c\/strong\u003e The grip design and geometry allow for safe mounting in standard cutting plotter holders.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications and material purpose:\u003c\/h3\u003e\u003cp\u003eDesigned for cutting and scoring work on CNC cutting plotters in the advertising, packaging, textile, and gasket industries.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444576854356,"sku":"ITA.16","price":19.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ITA.16_CE16.jpg?v=1791281167"},{"product_id":"fresa-helicoidal-de-punta-esferica-con-cuello-para-relieves-3d-vhm-z2-d20-i40-l150-s20-rh-acabado-positivo","title":"Ball nose spiral router bit with neck for 3D reliefs VHM Z2 D20 I40 L150 S20 RH Finishing positive","description":"\u003ch2\u003eTwo-edged VHM ball nose spiral cutter from the SQ32 series for 3D flat relief machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSQ32.20.040.150.20R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial ball nose spiral cutter made from solid sintered carbide \u003cstrong\u003eVHM\u003c\/strong\u003e from the \u003cstrong\u003eSQ32\u003c\/strong\u003e series, with positive geometry (chip removal upwards). The tool features an extended body with a taper above the working part, designed for deep machining of 3D models, cutting, and edge joining and aligning on CNC machines. The polished surface of the chip groove prevents the machined material from sticking and facilitates the quick evacuation of swarf. The spherical front radius combined with the finishing geometry of two edges (Z2) allows for achieving smooth surfaces. The ground shank in accuracy class H6 eliminates radial runout, protecting the drive system and guaranteeing a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eExtended body with undercut:\u003c\/strong\u003e The special taper of the working part allows safe and precise work in deep cavities and 3D forms without the risk of the body colliding with the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e Advanced polishing of the screw effectively removes chips, prevents the sticking of swarf, and reduces cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBall nose Z2 design with upward chip removal:\u003c\/strong\u003e The right-hand screw line ejects the chip upwards, ensuring cleanliness in the cutting area and high surface quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing edge geometry:\u003c\/strong\u003e Precisely sharpened cutting edges allow for a clean edge finish without the need for additional processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures quiet and stable operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for precise machining of molds and 3D models, cutting, and edge joining and aligning on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt works excellently for machining materials such as aluminium, CORIAN® composites, and HPL plates.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444577771860,"sku":"SQ32.20.040.150.20R","price":405.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SQ32.20.040.150.20R_199.20.040.150.20ram-108.jpg?v=1791281173"},{"product_id":"fresa-de-metal-duro-para-plegado-de-paneles-compositos-z1-d10-1-8-i4-l50-s10-a90-rh","title":"Solid carbide V-grooving router bit for composite panels Z1 D10\/1,8 I4 L50 S10 A90° RH","description":"\u003ch2\u003eCarbide VHM Milling Cutter for Bending Composite Sheets such as Dibond and Alucobond – Precise V Groove Cutting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eFVH.10.004.050.10Ra1\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial form cutter made of solid carbide (VHM) designed for precise V groove cutting for bending in aluminium-plastic composite materials (e.g., DIBOND®, ALUCOBOND®). The special design of the cutting edges allows for clean cutting of a V-shaped groove while preserving the intact external aluminium coating and core, which facilitates later manual bending of the sheets at the desired angle. The tool performs well in routing and preparing material for bending on CNC machining centres and overhead spindle milling machines. The precisely ground shank in precision class H6 eliminates radial runout, protecting the machine spindle from vibrations and wear.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGeometry for Bending Composites:\u003c\/strong\u003e Precisely ground blade angle allows for accurate V groove cutting, preparing the sheet for bending at angles of 90°, 108°, or 135°.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eClean Cutting Edge:\u003c\/strong\u003e Optimised cutting edge prevents burr formation on aluminium and protects the external paint coating from damage.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e High hardness and wear resistance guarantee a long tool life when machining highly abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e H6 class ground shank secures the tool against slipping in the holder and protects the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards guarantees vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for routing, engraving, and creating profiled grooves for angular bending in composite sheets on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in machining materials such as: DIBOND®, ALUCOBOND®, HYLITE®, Gutbond, and other aluminium-plastic facade and advertising laminates.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444625580372,"sku":"FVH.10.004.050.10Ra1","price":22.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/FVH.10.004.050.10Ra1_915.10.004.050.10RA1-107.jpg?v=1791281421"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z3-d6-i22-l60-s6-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z3 D6 I22 L60 S6 RH Finishing positive","description":"\u003ch2\u003eThree-flute spiral end mill VHM for aluminium and plastics with upward chip removal – clean bottom edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSR01.06.022.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial three-flute spiral end mill made from solid carbide (VHM) with positive geometry (upward chip removal). The arrangement of three cutting edges (Z3) ensures higher rigidity of the body and the ability to work with significantly higher feed rates compared to two-flute tools. The right-hand spiral effectively removes chips upwards, guaranteeing a clean and tear-free bottom edge. Designed for highly efficient cutting, grooving, and edge routing in aluminium, plastics, and composites on CNC machining centres and overhead milling machines. The finishing geometry of the cutting edges combined with polished chip flutes prevents chip build-up on the tool body. The ground shank in class H6 accuracy eliminates radial run-out, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThree-flute design Z3 (positive):\u003c\/strong\u003e Three cutting edges allow for a significant increase in feed speed while maintaining smooth cutting and high-quality finishes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive geometry (upward chip removal):\u003c\/strong\u003e The right-hand spiral lifts the chips upwards, effectively preventing tearing and fraying on the underside of the machined plate.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes:\u003c\/strong\u003e The mirror-like surface of the spiral reduces friction and prevents chip welding onto the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the cutting edge:\u003c\/strong\u003e Precision finishing of the cutting edges ensures a smooth surface after machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid and wear-resistant structure of the solid carbide guarantees long tool life and dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and range of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, as well as grooving and edge routing in aluminium, plastics, and composite materials on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444626497876,"sku":"SR01.06.022.060.06R","price":18.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SR01.06.022.060.06R_193.06.022.060.06RA-107.jpg?v=1791281427"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d4-i12-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D4 I12 L60 S6 RH Finishing positive","description":"\u003ch1\u003eSpiral mill for plexiglass and VHM plastics Z1 D4 I12 L60 S6 RH finishing positive\u003c\/h1\u003e\n\n\u003cp\u003eMonolithic Premium carbide mill designed for precise edge machining and cutting on CNC machines. The use of a single cutter (Z1) with a right-hand positive geometry ensures effective upward chip removal, protecting the cutting zone from sticking and overheating. The polished chip groove enhances material flow, allowing for a clean edge of the machined polymethyl methacrylate (PMMA) without the need for additional finishing processing.\u003c\/p\u003e\n\n\u003cp\u003eApplication: plastics (plexi\/PMMA), composite boards (Alucobond®, Alucobond® A2), mineral-acrylic materials (Corian®) and decorative laminates (HPL). Purpose: CNC machining centres, milling plotters.\u003c\/p\u003e\n\n\u003ch2\u003eApplication ST01.04.012.060.06RE:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: cutting, contour milling.\u003c\/li\u003e\n\u003cli\u003ePurpose: machining Plexi, Composite board AL-A2-AL \/ Etalbond® A2, Composite board AL-PE-AL \/ Alucobond®, Plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ITA TOOLS\u003c\/li\u003e\n\u003cli\u003eDiameter D: 4 mm\u003c\/li\u003e\n\u003cli\u003eWorking length I: 12 mm\u003c\/li\u003e\n\u003cli\u003eTotal length L: 60 mm\u003c\/li\u003e\n\u003cli\u003eShank diameter S: 6 mm\u003c\/li\u003e\n\u003cli\u003eNumber of blades Z: 1\u003c\/li\u003e\n\u003cli\u003eDirection of axial angle: positive\u003c\/li\u003e\n\u003cli\u003eType of processing: finishing\u003c\/li\u003e\n\u003cli\u003eGrip: Cylindrical grip\u003c\/li\u003e\n\u003cli\u003eMill construction: Monolith\u003c\/li\u003e\n\u003cli\u003eBody material: VHM\u003c\/li\u003e\n\u003cli\u003eBlade material: VHM\u003c\/li\u003e\n\u003cli\u003eFace geometry: Straight\u003c\/li\u003e\n\u003cli\u003eDisplay packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444626694484,"sku":"ST01.04.012.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.04.012.060.06RE_ST01.04.012.060.06RE-112.jpg?v=1791281430"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d8-i32-l80-s8-rh-acabado","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D8 I32 L80 S8 RH Finishing ","description":"\u003ch1\u003eSpiral end mill for plexiglass and VHM materials Z1 D8 I32 L80 S8 RH finishing positive\u003c\/h1\u003e\n\n\u003cp\u003eMonolithic Premium carbide end mill designed for precise edge machining and cutting on CNC machines. The use of a single flute (Z1) with a right-hand positive geometry guarantees effective upward chip removal, protecting the cutting zone from binding and heating. The polished chip flute improves material flow, allowing for a clean edge on the cut polymethyl methacrylate (PMMA) without the need for additional finishing machining.\u003c\/p\u003e\n\n\u003cp\u003eApplications: plastics (plexi\/PMMA), composite panels (Alucobond®, Alucobond® A2), mineral-acrylic materials (Corian®) and finishing laminates (HPL). Intended for: CNC machining centres, milling plotters.\u003c\/p\u003e\n\n\u003ch2\u003eApplication ST01.08.032.080.08R:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: cutting, contour milling.\u003c\/li\u003e\n\u003cli\u003eIntended for: processing plexiglass, composite panel AL-A2-AL \/ Etalbond® A2, composite panel AL-PE-AL \/ Alucobond®, plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ITA TOOLS\u003c\/li\u003e\n\u003cli\u003eDiameter D: 8 mm\u003c\/li\u003e\n\u003cli\u003eWorking length I: 32 mm\u003c\/li\u003e\n\u003cli\u003eTotal length L: 80 mm\u003c\/li\u003e\n\u003cli\u003eShank diameter S: 8 mm\u003c\/li\u003e\n\u003cli\u003eNumber of flutes Z: 1\u003c\/li\u003e\n\u003cli\u003eAxial angle direction: positive\u003c\/li\u003e\n\u003cli\u003eType of machining: finishing\u003c\/li\u003e\n\u003cli\u003eShank: Cylindrical shank\u003c\/li\u003e\n\u003cli\u003eMill construction: Monolith\u003c\/li\u003e\n\u003cli\u003eBody material: VHM\u003c\/li\u003e\n\u003cli\u003eBlade material: VHM\u003c\/li\u003e\n\u003cli\u003eFace geometry: Flat\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444627284308,"sku":"ST01.08.032.080.08R","price":34.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.08.032.080.08R_198.08.032.080.08RP-108.jpg?v=1791281433"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d8-i15-l60-s8-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D8 I15 L60 S8 RH Finishing","description":"\u003ch2\u003eTwo-flute straight VHM finishing cutter for foams and plastics – neutral chip ejection and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.08.015.060.08XE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute straight cutter made of solid carbide (VHM) with a simple blade geometry (neutral chip ejection to the sides). The Z2 design is intended for precise finishing of foams, plastics, and composite boards. The straight cutting edges do not exert vertical forces (either compressive or lifting), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished chip grooves minimise friction and prevent sticking and melting of soft materials. The tool is dedicated to finishing cuts, bonding, and grooving on CNC machining centres and overhead milling machines. The ground shank in H6 class eliminates radial run-out and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e The smooth surface facilitates free removal of chips, preventing the melting of plastics and sticking of cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction guarantees dimensional stability and longer blade life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank prevents slipping in the holder and protects the cone of the spindle from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eNaDia protective coating:\u003c\/strong\u003e A specialist protective layer with a very low friction coefficient (0.01–0.05) and high hardness (3650 HV 0.05) protects the cutting edge from wear, prevents sticking of chips, and significantly extends tool life.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for finishing cuts, bonding, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in machining materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444627808596,"sku":"SY26.08.015.060.08XE","price":48.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.08.015.060.08XE_SY26.08.015.060.08XE-112.jpg?v=1791281438"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d3-i15-l60-s3-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D3 I15 L60 S3 RH Finishing","description":"\u003ch2\u003eTwo-flute straight end mill VHM for finishing foams and plastics – neutral chip ejection and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.03.015.060.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute straight end mill made from solid carbide (VHM) with a simple blade geometry (neutral chip ejection sideways). The Z2 design has been engineered for precise finishing of foams, plastics, and composite boards. The straight cutting edges do not exert vertical forces (either pressing or lifting), which prevents the deformation of soft materials and guarantees a smooth finish on both sides of the part. Polished chip flutes reduce friction and prevent sticking and melting of soft plastics. The tool is dedicated to finishing cuts, seam cutting, and grooving on CNC machining centres and overhead spindle milling machines. The ground shank in H6 tolerance eliminates radial run-out and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes:\u003c\/strong\u003e Smooth surface facilitates the free removal of chips, preventing the melting of plastics and sticking of cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction guarantees dimensional stability and longer tool life during continuous work.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for finishing cutting, seam cutting, and grooving soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444628496724,"sku":"SY26.03.015.060.03R","price":12.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.03.015.060.03R_912.03.015.060.03RPI-104.jpg?v=1791281441"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d3-i6-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D3 I6 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-edge spiral milling cutter VHM for PLEXI with upward chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.03.006.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edge spiral milling cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, edging and trimming in Plexiglas, plastics and composites on CNC machines and overhead milling machines. The finishing geometry with a single blade (Z1) combined with a polished chip groove effectively prevents material sticking and melting. The right-hand helical flute efficiently evacuates chips upwards, protecting the cutting zone from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edge design Z1 (positive):\u003c\/strong\u003e The single cutting edge allows rapid removal of large amounts of material, minimising friction and risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror finish of the spiral prevents sticking and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e The precisely sharpened edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid VHM construction reduces vibrations and maintains dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and usage range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, edging, and trimming in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444629119316,"sku":"ST01.03.006.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.03.006.060.06RE_ST01.03.006.060.06RE-112.jpg?v=1791281444"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d3-i8-l60-s3-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D3 I8 L60 S3 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral cutter VHM for PLEXI with upward chip removal – clean lower edge and efficient chip evacuation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.03.008.060.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). The tool is equipped with a small angle of helix, which effectively prevents lifting and vibrations of the processed material. It is perfect for precise cutting, welding, and aligning edges of thin materials with thicknesses from 1 mm to 8 mm on CNC machines and overhead milling machines. The finishing geometry with a single edge (Z1) combined with a polished chip groove prevents sticking and melting of the material. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring stability during machining.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated to thin materials (1–8 mm):\u003c\/strong\u003e Reduced spiral eliminates upward pulling forces, preventing lifting of flexible sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 design (positive):\u003c\/strong\u003e The single cutting edge allows for efficient chip removal, minimising friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror surface of the spiral prevents sticking and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e Precisely sharpened edge guarantees perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations as well as welding and aligning edges in thin plastic sheets on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444629446996,"sku":"ST28.03.008.060.03R","price":15.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.03.008.060.03R_198.03.008.060.03RPS5903247148847-101.jpg?v=1791281446"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d4-i12-l60-s4-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D4 I12 L60 S4 RH Finishing positive","description":"\u003ch1\u003eSpiral end mill for plexiglass and VHM materials Z1 D4 I12 L60 S4 RH finishing positive\u003c\/h1\u003e\n\n\u003cp\u003ePremium carbide monolithic end mill designed for precise edge machining and cutting on CNC machines. The use of a single flute (Z1) with a right-hand positive geometry ensures effective upward chip removal, protecting the cutting zone from sticking and overheating. The polished fluted channel streamlines material flow, allowing for a clean edge on the machined polymethyl methacrylate (PMMA) without the need for additional finishing work.\u003c\/p\u003e\n\n\u003cp\u003eApplication: plastics (plexi\/PMMA), composite panels (Alucobond®, Alucobond® A2), mineral-acrylic materials (Corian®), and decorative laminates (HPL).\u003c\/p\u003e\n\u003cp\u003eIntended for: CNC machining centres, milling plotters.\u003c\/p\u003e\n\n\u003ch2\u003eApplication ST01.04.012.060.04R:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Cutting, Contour milling.\u003c\/li\u003e\n\u003cli\u003eIntended for: machining Plexi, AL-A2-AL composite panel \/ Etalbond® A2, AL-PE-AL composite panel \/ Alucobond®, Plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ITA TOOLS\u003c\/li\u003e\n\u003cli\u003eDiameter D: 4 mm\u003c\/li\u003e\n\u003cli\u003eWorking length I: 12 mm\u003c\/li\u003e\n\u003cli\u003eTotal length L: 60 mm\u003c\/li\u003e\n\u003cli\u003eShank diameter S: 4 mm \u003c\/li\u003e\n\u003cli\u003eNumber of flutes Z: 1 \u003c\/li\u003e\n\u003cli\u003eDirection of axial angle: positive \u003c\/li\u003e\n\u003cli\u003eType of machining: finishing\u003c\/li\u003e\n\u003cli\u003eShank: Cylindrical shank\u003c\/li\u003e\n\u003cli\u003eEnd mill construction: Monolithic\u003c\/li\u003e\n\u003cli\u003eBody material: VHM\u003c\/li\u003e\n\u003cli\u003eBlade material: VHM\u003c\/li\u003e\n\u003cli\u003eFace geometry: Straight\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444630266196,"sku":"ST01.04.012.060.04R","price":18.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.04.012.060.04R_ST01.04.012.060.04R-212.jpg?v=1791281450"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d4-i15-l60-s4-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D4 I15 L60 S4 RH Finishing positive","description":"\u003ch1\u003eSpiral end mill for plexiglass and VHM materials Z1 D4 I15 L60 S4 RH finishing positive\u003c\/h1\u003e\n\n\u003cp\u003eMonolithic end mill made of premium carbide designed for precise edge machining and cutting on CNC machines. The use of a single flute (Z1) with a right-hand positive geometry ensures effective upward chip removal, protecting the cutting zone from sticking and overheating. The polished flutes improve material flow, allowing for a clean edge on the machined polymethyl methacrylate (PMMA) without the need for additional finishing work.\u003c\/p\u003e\n\n\u003cp\u003eApplication: plastics (plexi\/PMMA), composite panels (Alucobond®, Alucobond® A2), mineral-acrylic materials (Corian®) and finishing laminates (HPL).\u003c\/p\u003e\n\u003cp\u003eIntended use: CNC machining centres, milling plotters.\u003c\/p\u003e\n\n\u003ch2\u003eApplication ST01.04.015.060.04R:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: cutting, contour milling.\u003c\/li\u003e\n\u003cli\u003eIntended use: machining plexiglass, composite panel AL-A2-AL \/ Etalbond® A2, composite panel AL-PE-AL \/ Alucobond®, plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ITA TOOLS\u003c\/li\u003e\n\u003cli\u003eDiameter D: 4 mm\u003c\/li\u003e\n\u003cli\u003eWorking length I: 15 mm\u003c\/li\u003e\n\u003cli\u003eTotal length L: 60 mm\u003c\/li\u003e\n\u003cli\u003eShank diameter S: 4 mm \u003c\/li\u003e\n\u003cli\u003eNumber of flutes Z: 1 \u003c\/li\u003e\n\u003cli\u003eDirection of axial angle: positive \u003c\/li\u003e\n\u003cli\u003eType of machining: finishing\u003c\/li\u003e\n\u003cli\u003eShank: Cylindrical shank\u003c\/li\u003e\n\u003cli\u003eEnd mill structure: Monolith\u003c\/li\u003e\n\u003cli\u003eBody material: VHM\u003c\/li\u003e\n\u003cli\u003eBlade material: VHM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444630692180,"sku":"ST01.04.015.060.04R","price":18.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.04.015.060.04R_198.04.015.060.04RP-108.jpg?v=1791281452"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d2-i6-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D2 I6 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral cutter VHM for PLEXI with upward chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.02.006.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, bonding, and edge finishing in plexiglass, plastics, and composites on CNC machines and overhead spindle milling machines. The finishing geometry with one edge (Z1) combined with a polished chip groove effectively prevents material sticking and melting. The right-hand screw line efficiently removes chips upwards, protecting the cutting zone from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 (positive) design:\u003c\/strong\u003e The single cutting edge allows for quick removal of large amounts of material, minimising friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror-like surface of the spiral prevents sticking and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing edge geometry:\u003c\/strong\u003e Precisely ground edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMonolith of sintered carbide (VHM):\u003c\/strong\u003e The rigid VHM construction reduces vibrations and maintains dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as bonding and edge finishing in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the processing of materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444630987092,"sku":"ST01.02.006.060.06R","price":26.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.02.006.060.06R_ST01.02.006.060.06R-111.jpg?v=1791281455"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d3-i12-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D3 I12 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-blade spiral end mill VHM for PLEXI with upward chip removal – clean bottom edge and efficient chip evacuation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.03.012.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-blade spiral end mill made from solid sintered carbide (VHM) with positive geometry (upward chip removal). The tool is equipped with a small angle of the helical line, which effectively prevents lifting and vibrations of the processed material. It is excellent for precise cutting, joining and edging thin materials with a thickness of 1 mm to 8 mm on CNC machines and overhead spindle milling machines. The finishing geometry with a single blade (Z1) combined with a polished fluting prevents sticking and melting of the chips. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring processing stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated to thin materials (1–8 mm):\u003c\/strong\u003e Reduced spiral eliminates upward pulling forces, preventing the lifting of flimsy sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-blade Z1 (positive) design:\u003c\/strong\u003e The single cutting blade allows for efficient chip removal, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished fluting:\u003c\/strong\u003e The mirror-like surface of the spiral prevents chip binding and re-welding of chips with the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e Precisely sharpened edge ensures perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as joining and edging in thin sheets of plastic on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2 and composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444631118164,"sku":"ST28.03.012.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.03.012.060.06RE_ST28.03.012.060.06RE-112.jpg?v=1791281457"},{"product_id":"fresa-de-metal-duro-para-plegado-de-paneles-compositos-z2-d18-2-i15-l60-s12-a135-rh","title":"Solid carbide V-grooving router bit for composite panels Z2 D18\/2 I15 L60 S12 A135° RH","description":"\u003ch2\u003eSolid Carbide Milling Cutter for Bending Composite Panels such as Dibond and Alucobond – Precision V-Groove Cutting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eFVH.18.015.060.12Ra3\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial form cutter made of solid carbide (VHM) designed for precise V-groove cutting for bending in aluminium-plastic composite materials (e.g., DIBOND®, ALUCOBOND®). The special design of the cutting edges enables clean cutting of a V-shaped groove while preserving the intact external aluminium coating and core, facilitating subsequent manual bending of panels at the desired angle. The tool is effective for grooving and preparing the material for bending on CNC machining centres and overhead spindle milling machines. The precisely ground shank in H6 accuracy class eliminates radial runout, protecting the machine spindle from vibrations and wear.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGeometry for Bending Composites:\u003c\/strong\u003e The precisely ground cutting angle allows for accurate V-groove cutting, preparing the panel for bending at angles of 90°, 108° or 135°.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eClean Cutting Edge:\u003c\/strong\u003e The optimised cutting edge prevents burrs on aluminium and protects the external paint coating from damage.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e High hardness and wear resistance guarantee a long tool life when machining highly abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Grip Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The H6 ground shank secures the tool against slipping in the holder and protects the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards ensures vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for grooving, engraving, and creating profiled grooves for angular bending in composite panels on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: DIBOND®, ALUCOBOND®, HYLITE®, Gutbond, and other aluminium-plastic facade and advertising laminates. \u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444631806292,"sku":"FVH.18.015.060.12Ra3","price":87.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/FVH.18.015.060.12Ra3_FVH.18.015.060.12Ra3-111.jpg?v=1791281460"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d8-i15-l60-s8-rh-acabado-1","title":"straight router bit for foam \u0026 plastics VHM Z2 D8 I15 L60 S8 RH Finishing","description":"\u003ch2\u003eTwo-flute VHM finishing cutter for foams and plastics – neutral chip removal and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.08.015.060.08XR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute straight cutter made from solid carbide (VHM) with simple blade geometry (neutral chip removal to the sides). The Z2 design is intended for precise finishing of foams, plastics, and composite panels. The straight cutting edges do not exert vertical forces (either compressive or lifting), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished chip flutes reduce friction and prevent the sticking and melting of soft plastics. The tool is dedicated to finishing cuts, jointing, and grooving on CNC machining centres and overhead milling machines. The ground shank in class H6 eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes:\u003c\/strong\u003e Smooth surface facilitates free removal of chips, preventing plastics from melting and sticking to the cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction ensures dimensional stability and longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eProtective coating NaDia:\u003c\/strong\u003e Specialist protective layer with a very low coefficient of friction (0.01–0.05) and high hardness (3650 HV 0.05) protects the cutting edge from wear, prevents chip adhesion, and significantly extends tool life.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and areas of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for finishing cuts, jointing, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in the processing of materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444632101204,"sku":"SY26.08.015.060.08XR","price":52.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.08.015.060.08XR_912.08.015.060.08XRI-109_095c68ec-ee5f-4c42-8800-c6f5ced8990a.jpg?v=1794299149"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d5-i40-l100-s8-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D5 I40 L100 S8 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Cutter VHM for PLEXI with Upward Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.05.040.100.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, joining, and edge finishing in plexiglass, plastics, and composites on CNC machines and overhead milling machines. The finishing geometry with a single edge (Z1) combined with a polished chip flute effectively prevents material sticking and melting. The right-hand spiral efficiently evacuates chips upward, protecting the cutting zone from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in H6 accuracy class eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-Edge Design Z1 (Positive):\u003c\/strong\u003e The single cutting edge allows for quick removal of large amounts of material, minimising friction and the risk of overheating the plastic.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flute:\u003c\/strong\u003e The mirror-like surface of the spiral prevents sticking and re-welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Blade Geometry:\u003c\/strong\u003e Precisely ground edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e The rigid design of VHM reduces vibrations and helps maintain dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Balancing compliant with ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as jointing and edge finishing in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for processing materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444632625492,"sku":"ST01.05.040.100.08R","price":40.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.05.040.100.08R_198.050.40.100.08RP-104.jpg?v=1791281465"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d4-i15-l75-s4-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D4 I15 L75 S4 RH Finishing","description":"\u003ch2\u003eTwo-flute VHM finishing end mill for foams and plastics – neutral chip removal and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.04.015.075.04R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute end mill made from solid carbide (VHM) with simple cutting edge geometry (neutral chip removal to the sides). The Z2 design has been engineered for precise finishing of foams, plastics, and composite boards. The straight cutting edges do not exert vertical forces (neither downward nor upward), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished chip channels reduce friction and prevent adhesion and melting of soft materials. The tool is dedicated to finishing cuts, grooving, and pocketing on CNC machining centres and overhead milling machines. The H6 grade ground shank eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e Smooth surface facilitates free chip removal, preventing the melting of plastics and sticking to the cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction guarantees dimensional stability and extended tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for finishing cutting, grooving, and pocketing operations on soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444633051476,"sku":"SY26.04.015.075.04R","price":15.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.04.015.075.04R_912.04.015.075.04RPI-107.jpg?v=1791281467"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d8-i70-l120-s8-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D8 I70 L120 S8 RH Finishing","description":"\u003ch2\u003eTwo-edge straight VHM finishing cutter for foams and plastics – neutral chip ejection and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.08.070.120.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-edge straight cutter made of solid carbide (VHM) with a simple blade geometry (neutral chip ejection to the sides). The Z2 design is intended for precise finishing of foams, plastics, and composite panels. The straight cutting edges do not exert vertical forces (either downward or upward), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished chip flutes reduce friction and prevent sticking and melting of soft plastics. The tool is dedicated to finishing cuts, jointing, and grooving on CNC machining centres and overhead milling machines. The ground shank in H6 class eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-edge straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e Smooth surface facilitates the free removal of chips, preventing melting of materials and adhesive build-up on cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction ensures dimensional stability and longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotation speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for finishing cutting operations, jointing, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for processing materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444633608532,"sku":"SY26.08.070.120.08R","price":79.05,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.08.070.120.08R_912.08.070.150.08RPI-112_567d134f-bfa6-46d0-9769-83a8fd9db0b8.jpg?v=1794296939"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d4-i12-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D4 I12 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Milling Cutter VHM for PLEXI with upward chip removal – clean bottom edge and efficient chip disposal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.04.012.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral milling cutter made from solid carbide (VHM) with positive geometry (upward chip removal). The tool features a small helix angle, which effectively prevents lifting and vibration of the workpiece material. It excels in precision cutting, edge welding, and aligning thin materials with a thickness of 1 mm to 8 mm on CNC machines and overhead spindle milling machines. The finishing geometry with a single cutting edge (Z1) combined with a polished chip groove prevents stickiness and melting of the material. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring processing stability.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated for thin materials (1–8 mm):\u003c\/strong\u003e Reduced spiral eliminates upward pulling forces, preventing the lifting of flimsy sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged design Z1 (positive):\u003c\/strong\u003e The single cutting edge allows for efficient chip removal, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror-like surface of the spiral prevents adhesion and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e Precisely sharpened edge ensures perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground grip surface prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, as well as welding and aligning edges in thin plastic sheets on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444633805140,"sku":"ST28.04.012.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.04.012.060.06RE_ST28.04.012.060.06RE-112.jpg?v=1794296942"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z3-d8-i35-l80-s8-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z3 D8 I35 L80 S8 RH Finishing positive","description":"\u003ch2\u003e3-Flute VHM Spiral Milling Cutter for Aluminium and Plastics with Upward Chip Removal – Clean Bottom Edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSR01.08.035.080.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial 3-flute spiral milling cutter made from solid carbide (VHM) with positive geometry (upward chip removal). The arrangement of three cutting edges (Z3) provides higher rigidity of the body and allows for significantly higher feed rates compared to two-flute tools. The right-hand screw line efficiently removes chips upwards, ensuring a clean and tear-free bottom edge. Designed for high-efficiency cutting, as well as jointing and edge levelling in aluminium, plastics, and composites on CNC machining centres and overhead milling machines. The finishing geometry of the blades combined with polished chip flutes prevents the body from becoming clogged with chips. The ground shank, classified with H6 accuracy, eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003e3-Flute Design Z3 (Positive):\u003c\/strong\u003e Three cutting edges allow for a significant increase in feed rate while maintaining cutting fluidity and high-quality finish.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive Geometry (Upward Chip Removal):\u003c\/strong\u003e The right-hand spiral lifts chips upwards, effectively preventing fraying and tearing on the underside of the workpiece.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes:\u003c\/strong\u003e The mirror-like surface of the spiral reduces friction and prevents chips from welding to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Blade Geometry:\u003c\/strong\u003e Precise finishing of the cutting edges ensures a smooth surface after machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e The rigid and wear-resistant structure of the solid body guarantees long tool life and dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing Class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations as well as jointing and edge levelling in aluminium, plastics, and composite materials on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444636819796,"sku":"SR01.08.035.080.08R","price":47.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SR01.08.035.080.08R_193.08.035.080.08RA-1.jpg?v=1793968439"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d3-i12-l60-s3-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D3 I12 L60 S3 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral milling cutter VHM for PLEXI with upward chip removal – clean lower edge and efficient chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.03.012.060.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral milling cutter made from solid cemented carbide (VHM) with positive geometry (upward chip removal). The tool features a small angle of inclination of the helical profile, which effectively prevents lifting and vibrations of the machined material. It performs excellently in precise cutting, welding, and edge levelling of thin materials with a thickness from 1 mm to 8 mm on CNC machines and overhead spindle milling machines. The finishing geometry with one edge (Z1) combined with a polished chip groove prevents sticking and melting of the material. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring stability during machining.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated to thin materials (1–8 mm):\u003c\/strong\u003e Reduced spiral eliminates upward pulling forces, preventing the lifting of flexible sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 (positive) design:\u003c\/strong\u003e The single cutting edge allows for efficient chip removal, minimising friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror finish of the spiral prevents sticking and re-welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e Precisely sharpened edge guarantees perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations and edge welding and levelling in thin plastic sheets on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the processing of materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444636885332,"sku":"ST28.03.012.060.03R","price":15.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.03.012.060.03R_198.03.012.060.03RPS-108.jpg?v=1791281481"},{"product_id":"fresa-de-metal-duro-para-redondear-plasticos-y-aluminio-z2-d12-i4-l70-s12-r4-rh","title":"Solid carbide corner rounding router bit for plastics and aluminum Z2 D12\/ I4 L70 S12 R4 RH","description":"\u003ch2\u003eTwo-flute VHM spiral end mill for rounding from the FVI series\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eFVI.12.004.070.12R4\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill for rounding made of solid carbide (VHM) from the \u003cstrong\u003eFVI\u003c\/strong\u003e series. Designed for precision finishing of edges, rounding, chamfering, and grooving on CNC machining centres and overhead spindle milling machines. The tool is made from a special grade of sintered carbide, which ensures extended service life and high resistance to abrasive wear. The profiled blades in a two-flute configuration (Z2) allow for smooth radiused edges without chipping. The ground shank in accuracy class H6 eliminates radial runout, protecting the drive system and ensuring stability during the machining process.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSpecial grade of sintered carbide (VHM):\u003c\/strong\u003e Dedicated solid carbide ensures long tool life and resistance to dulling.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute Z2 profile design:\u003c\/strong\u003e Two precisely ground rounding blades ensure clean cutting and high surface finish quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eProtective coating option:\u003c\/strong\u003e The tool is suitable for coating with protective layers, which increases thermal resistance and extends working time.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures stable and quiet operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for edge rounding, chamfering, and profile grooving operations on CNC machining centres and overhead spindle milling machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: soft and hard solid wood, raw and laminated MDF boards, raw particle board, and plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444637180244,"sku":"FVI.12.004.070.12R4","price":63.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/FVI.12.004.070.12R4_FVI.12.004.070.12R4-106.jpg?v=1791281484"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d5-i15-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D5 I15 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Milling Cutter VHM for PLEXI with Upward Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.05.015.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, edge joining, and smoothing in plexiglass, plastics, and composites on CNC machines and overhead milling machines. The finishing geometry with a single blade (Z1) combined with a polished chip groove effectively prevents material sticking and melting. The right-hand helical design efficiently removes chips upwards, protecting the cutting area from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine’s drive system.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-Edged Design Z1 (Positive):\u003c\/strong\u003e The single cutting edge allows for rapid removal of large amounts of material, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Groove:\u003c\/strong\u003e The mirror-like surface of the spiral prevents sticking and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Edge Geometry:\u003c\/strong\u003e The precisely ground edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e The rigid construction of VHM reduces vibrations and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the chuck and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Balancing according to ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Range of Applications:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, edge joining, and smoothing in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, as well as composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444640391508,"sku":"ST01.05.015.060.06R","price":27.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.05.015.060.06R_198.05.015.060.06RP-110.jpg?v=1791281488"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d10-i15-l60-s10-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D10 I15 L60 S10 RH Finishing","description":"\u003ch2\u003eTwo-flute finishing end mill for foams and plastics – neutral chip removal and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.10.015.060.10XR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute end mill made from solid tungsten carbide (VHM) with a simple cutting edge geometry (neutral chip removal to the sides). The Z2 design has been developed for precise finishing of foams, plastics, and composite panels. The straight cutting edges do not create vertical forces (neither pressing nor lifting), preventing the deformation of soft materials and ensuring a smooth finish on both sides of the detail. Polished chipways reduce friction and prevent sticking and melting of soft plastics. The tool is dedicated to finishing cuts, joining, and grooving on CNC machining centres and overhead spindle milling machines. The ground shank in class H6 eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute simple geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chipways:\u003c\/strong\u003e Smooth surface facilitates easy removal of chips, preventing the melting of materials and sticking of cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid tungsten carbide (VHM):\u003c\/strong\u003e Sturdy construction guarantees dimensional stability and longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eProtective NaDia coating:\u003c\/strong\u003e A specialised protective layer with a very low coefficient of friction (0.01–0.05) and high hardness (3650 HV 0.05) protects the cutting edge from wear, prevents chip sticking, and significantly extends tool life.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for finishing cutting, joining, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for processing materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444641210708,"sku":"SY26.10.015.060.10XR","price":46.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.10.015.060.10XR_912.10.015.060.10XRi-111.jpg?v=1791281493"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d4-i12-l60-s6-rh-acabado-positivo-1","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D4 I12 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Milling Cutter VHM for PLEXI with Upwards Chip Removal – Clean Bottom Edge and Efficient Chip Evacuation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.04.012.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upwards chip removal). The tool is equipped with a small helix angle, effectively preventing lifting and vibrations of the machined material. It is perfect for precise cutting, edging, and aligning the edges of thin materials with a thickness of 1 mm to 8 mm on CNC machines and overhead milling machines. The finishing geometry with one cutting edge (Z1) combined with a polished chip flute prevents adhesion and melting of the material. The ground shank with an accuracy class of H6 eliminates radial run-out, protecting the machine's drive system and ensuring machining stability.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated to thin materials (1–8 mm):\u003c\/strong\u003e The reduced spiral eliminates upward pulling forces, preventing lifting of flimsy sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 design (positive):\u003c\/strong\u003e The single cutting edge allows for efficient chip removal, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flute:\u003c\/strong\u003e The mirror-like surface of the spiral prevents adhesion and secondary welding of chips with the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing edge geometry:\u003c\/strong\u003e The precisely sharpened edge ensures perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as edging and aligning the edges of thin plastic sheets on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for processing materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444643864916,"sku":"ST28.04.012.060.06R","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.04.012.060.06R_198.04.012.060.06RPS-107.jpg?v=1791281498"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d6-i22-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D6 I22 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Cutter VHM for PLEXI with Upward Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.06.022.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, bonding, and edge finishing in plexiglass, plastics, and composites on CNC machines and overhead spindle milling machines. The finishing geometry with a single blade (Z1) combined with a polished chip flute effectively prevents material adherence and melting. The right-hand helical flute efficiently removes chips upwards, protecting the cutting zone from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-Blade Design Z1 (Positive):\u003c\/strong\u003e A single cutting blade allows for quick removal of large amounts of material, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flute:\u003c\/strong\u003e The mirror-like surface of the flute prevents adhesion and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Blade Geometry:\u003c\/strong\u003e Precisely ground edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMonolith of Sintered Carbide (VHM):\u003c\/strong\u003e The rigid VHM construction reduces vibrations and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Applications:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as bonding and edge finishing in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the processing of materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444644323668,"sku":"ST01.06.022.060.06RE","price":27.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.06.022.060.06RE_ST01.06.022.060.06RE-112.jpg?v=1791281500"},{"product_id":"fresa-helicoidal-super-finish-para-plexiglas-y-plasticos-vhm-z1-d6-i22-l60-s6-rh-acabado-positivo","title":"Super Finish spiral router bit for acrylic \u0026 plastics VHM Z1 D6 I22 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle Blade Spiral Mill VHM for PLEXI with Upward Chip Removal Super Finish – Mirror Quality Edges and Efficient Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST36.06.022.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single blade spiral mill made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, edging, and alignment of edges in plexiglass, plastics, and composites on CNC machines and overhead spindle milling machines. The tool from the Super Finish line has a special blade geometry and highly polished flute, allowing for a mirror finish on edges without the need for additional polishing. The right-hand spiral efficiently removes chips upward, preventing melting and sticking of the material in the cutting area. The ground shank with an accuracy class of H6 eliminates radial runout, protecting the machine's drive system and ensuring stable operation.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSpecial Super Finish Geometry (Z1):\u003c\/strong\u003e Unique sharpening of the single blade guarantees a perfectly smooth, transparent, and mirror-like edge immediately after machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHighly Polished Flute:\u003c\/strong\u003e The mirror surface of the spiral prevents chips from welding to the body and ensures immediate chip evacuation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive Geometry with Upward Chip Removal:\u003c\/strong\u003e The right-hand spiral effectively removes chips from the cutting zone, protecting the material from overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e Rigid and wear-resistant construction eliminates vibrations, ensuring dimensional repeatability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Surface Roughness of the Shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the chuck and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing Class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures stable and quiet operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations and edging and aligning edges in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444644618580,"sku":"ST36.06.022.060.06R","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST36.06.022.060.06R_ST36.06.022.060.06R-107.jpg?v=1791281502"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z2-d10-i22-l60-s10-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z2 D10 I22 L60 S10 RH Finishing positive","description":"\u003ch2\u003eTwo-flute VHM spiral end mill for aluminium and plastics with upward chip removal – clean bottom edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSQ01.10.022.060.10R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute spiral end mill made from solid carbide (VHM) with positive geometry (upward chip removal). The arrangement of two cutting edges (Z2) provides greater tool rigidity, reduces vibration, and allows for higher feed rates while maintaining stability. The right-hand spiral effectively lifts chips upwards, ensuring cleanliness and preventing tear-outs on the bottom edge of the workpiece. Designed for precision cutting, edge jointing, and trimming in aluminium, plastics, and composite materials on CNC machining centres and conventional milling machines. The finishing geometry combined with polished chip grooves prevents chip build-up on the tool body. The ground shank in accuracy class H6 eliminates radial run-out, protecting the machine spindle.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute design Z2 (positive):\u003c\/strong\u003e Two cutting edges enhance the rigidity of the mill and enable increased feed speeds with very smooth guidance in the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive geometry (upward chip removal):\u003c\/strong\u003e The right-hand spiral directs chips upwards, preventing fraying and tear-outs on the underside of the workpiece.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e The mirror-like surface of the spiral reduces friction, effectively preventing sticking and welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e Precisely sharpened cutting edges ensure a smooth finish on the machined surfaces.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid and wear-resistant structure of the solid carbide reduces vibration and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as edge jointing and trimming in aluminium, plastics, and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444645405012,"sku":"SQ01.10.022.060.10R","price":35.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SQ01.10.022.060.10R_SQ01.10.022.060.10R-103.jpg?v=1791281505"},{"product_id":"fresa-diamantada-recta-pcd-z3-d12-i15-l85-s12-h3-5-rh","title":"PCD straight diamond router bit Z3 D12 I15 L85 S12 H3,5 RH","description":"\u003ch1\u003eThree-blade PCD Diamond Cutter\u003c\/h1\u003e\u003cp\u003eIndex: DT3.12.015.12.0SR\u003c\/p\u003e\u003cp\u003eIndustrial three-blade diamond cutter from the \u003cstrong\u003eDT3\u003c\/strong\u003e series, equipped with polycrystalline diamond (PCD) blades. The tool is designed for high-performance cutting, shaping, leveling, grooving and slotting of wood-based and composite materials on CNC machining centres. The body made of sintered carbide with a hardness of 93.8 HRA or high-quality stainless steel ensures maximum rigidity and stability during machining. The PCD blades set in negative or straight geometry provide a clean edge and outstanding longevity. The tool design allows for multiple sharpening (2–4 times depending on the height of the diamond insert), significantly reducing operating costs. The ground shank in accuracy class H6 protects against radial runout.\u003c\/p\u003e\u003ch3\u003eKey technical parameters and properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003ePolycrystalline diamond (PCD) blades:\u003c\/strong\u003e Three full PCD blades with negative or straight geometry ensure outstanding durability and clean quality of the processed material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReinforced body:\u003c\/strong\u003e Made from sintered carbide (93.8 HRA) or stainless steel, eliminating vibrations and providing high dimensional stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMultiple sharpening capability:\u003c\/strong\u003e PCD inserts with a height of H2.5 allow for 2–3 sharpening cycles, while a height of H3 enables 3–4 regeneration operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOperational versatility:\u003c\/strong\u003e Blade geometry adapted for cutting, shaping, angular connections, grooving and making slots.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOptimised grip roughness:\u003c\/strong\u003e Low grip surface roughness (Ra ≤ 0.3 µm) prevents slipping in the holder and protects the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Static-dynamic balancing in accordance with ISO\/EN standard (class G2.5) protects spindle bearings and ensures vibration-free operation.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and material suitability:\u003c\/h3\u003e\u003cp\u003eDedicated to mass machining on CNC machines and overhead milling machines in the furniture and carpentry industry.\u003c\/p\u003e\u003cp\u003eMaterial being processed: Raw and laminated MDF, raw and laminated chipboard, cement-bonded fibreboards, glass and carbon fibre composites, Corian®, HPL, raw and laminated plywood, and aluminium.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648059220,"sku":"DT3.12.015.12.0SR","price":204.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT3.12.015.12.0SR_DT3.12.015.12.0SR-308.jpg?v=1793967615"},{"product_id":"fresa-diamantada-recta-pcd-z2-d12-i15-l73-s12-h3-rh","title":"PCD straight diamond router bit Z2 D12 I15 L73 S12 H3 RH","description":"\u003ch2\u003ePCD Diamond End Mill DT2 – for precise finishing and formatting machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue index:\u003c\/strong\u003e\u0026nbsp;DT2.12.015.12.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond end mill from the \u003cstrong\u003eDT2\u003c\/strong\u003e series features two full PCD diamond blades H3 mm, designed for highly efficient formatting and finishing machining on spindle mills and CNC machines. The tool's structure consists of a stable body made of sintered carbide HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of rigidity, while the precise clamping tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively eliminates radial run-out, protecting the spindle bearings and ensuring ideal edge finishing.\u003c\/p\u003e\u003ch3\u003eKey features and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-sharpened cutting edges (ablation):\u003c\/strong\u003e The DIA blades are finished using a laser beam, resulting in perfectly sharp profiles with a minimal cutting radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip area and cutting edge:\u003c\/strong\u003e The smooth back edge of the PCD diamond insert, combined with spacious chip flutes, prevents material from sticking and facilitates chip evacuation from the working area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the shank:\u003c\/strong\u003e The shank has a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, preventing slippage of the end mill in the tool holder and counteracting wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Attention to static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of the PCD insert):\u003c\/strong\u003e The insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, notching, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444668932436,"sku":"DT2.12.015.12.0MR","price":138.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.12.015.12.0MR_DT2.12.015.12.0MR-102.jpg?v=1793967605"},{"product_id":"fresa-diamantada-recta-pcd-z2-d9-i21-l71-5-s10-h2-5-rh","title":"PCD straight diamond router bit Z2 D9 I21 L71,5 S10 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter Dual Blade DT2 – for Precise Finishing and Shaping\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue Index:\u003c\/strong\u003e\u0026nbsp;DT2.09.021.10.2MR\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDT2\u003c\/strong\u003e series equipped with two full PCD diamond blades H2.5 mm, designed for highly efficient shaping and finishing on overhead milling machines and CNC machining centres. The tool's construction comprises a stable body made of sintered carbide monolith HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of stiffness, while the precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively mitigates radial runout, protecting the spindle bearings and guaranteeing a perfect edge finish.\u003c\/p\u003e\u003ch3\u003eKey Properties and Technical Specification:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-Sharpened Cutting Edges (Ablation):\u003c\/strong\u003e The DIA blades have been finished using a laser beam, resulting in perfectly sharp profiles with a minimal cutting edge radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Area and Cutting Edge:\u003c\/strong\u003e The smoothed rear edge of the PCD diamond insert combined with extensive chip flutes prevents material build-up and facilitates chip evacuation from the work area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Grip Surface Roughness:\u003c\/strong\u003e Grip with a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from slipping in the tool holder and counters the wear of the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Attention to static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Insert):\u003c\/strong\u003e The insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, grooving, and slotting operations.\u003c\/p\u003e\u003cp\u003eIt performs exceptionally well in processing materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444669161812,"sku":"DT2.09.021.10.2MR","price":132.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.09.021.10.2MR_DT2.09.021.10.2MR-110.jpg?v=1791281606"},{"product_id":"fresa-diamantada-recta-pcd-z2-d8-i15-l70-s8-h3-rh","title":"PCD straight diamond router bit Z2 D8 I15 L70 S8 H3 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter Dual-Edged DT2 – for Precision Finishing and Formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue Number:\u003c\/strong\u003e\u0026nbsp;DT2.08.015.08.0MR\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDT2\u003c\/strong\u003e series equipped with two full PCD diamond cutting edges H3 mm, designed for highly efficient formatting and finishing machining on overhead spindle milling machines and CNC machining centres. The tool's construction features a stable body made of sintered tungsten carbide HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of rigidity, and the precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively eliminates radial runout, protecting the spindle bearings and guaranteeing perfect edge finishing.\u003c\/p\u003e\u003ch3\u003eKey properties and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-Sharpened Cutting Edges (Ablation):\u003c\/strong\u003e The DIA blades have been finished using a laser beam, enabling the achievement of perfectly sharp profiles with a minimum cutting edge radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Area and Cutting Edge:\u003c\/strong\u003e The smoothed rear edge of the PCD diamond insert, combined with ample chip flutes, prevents chip sticking and facilitates chip evacuation from the working area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Surface Roughness of the Shank:\u003c\/strong\u003e The shank with a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents slippage of the cutter in the tool holder and counteracts wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Care for static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Insert):\u003c\/strong\u003e Insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, and insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, grooving, and slotting.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444669620564,"sku":"DT2.08.015.08.0MR","price":110.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.08.015.08.0MR_DT2.08.015.08.0MR-106.jpg?v=1791281607"},{"product_id":"fresa-diamantada-recta-pcd-z2-d6-i10-l75-s12-h2-5-rh","title":"PCD straight diamond router bit Z2 D6 I10 L75 S12 H2,5 RH","description":"\u003ch2\u003eDT2 PCD Diamond Milling Cutter – for Precise Finishing and Formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue index:\u003c\/strong\u003e\u0026nbsp;DT2.06.010.12.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDT2\u003c\/strong\u003e series is equipped with two full diamond PCD blades H2.5 mm, designed for highly efficient formatting and finishing machining on overhead spindle milling machines and CNC machines. The tool's construction features a stable body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond plates are embedded. The use of a hard alloy in the shank guarantees a high level of stiffness, while the precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively eliminates radial runout, protecting the spindle bearings and ensuring perfect edge finishing.\u003c\/p\u003e\u003ch3\u003eKey properties and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser sharpened cutting edges (ablation):\u003c\/strong\u003e The DIA blades are finished using a laser beam, allowing for perfectly sharp profiles with a minimal cutting radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip area and cutting edge:\u003c\/strong\u003e The smoothed rear edge of the PCD diamond plate combined with extensive chip channels prevents material build-up and facilitates chip evacuation from the work area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the shank:\u003c\/strong\u003e The shank with a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents slippage of the cutter in the tool holder and counteracts wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Care for static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and generated noise during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e The plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the plate \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, notching, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444669915476,"sku":"DT2.06.010.12.0MR","price":132.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.06.010.12.0MR_DT2.06.010.12.0MR-107.jpg?v=1791281608"},{"product_id":"fresa-para-composites-desbaste-d4-i22-l60-s6-rh","title":"Router bit for composites Roughing D4 I22 L60 S6 RH","description":"\u003ch2\u003eMulti-edge VHM spiral milling cutter composite roughing tool – rosette head (CNR) and delamination-free machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eCNR.04.022.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial roughing cutter made of solid carbide (VHM) with a rosette-type head (CNR) and neutral cutting edge geometry (chip ejection to the sides). The front design facilitates axial entry into the material along the Z-axis, reducing cutting resistance and eliminating the risk of damaging the structure upon entry. The multi-edge cutting system crushes the material, preventing delamination of composites and pulling out glass and carbon fibers. The neutral cutting direction does not generate axial forces (either pressing or lifting), ensuring a high standard of edge finish on both sides of the plate. Dedicated for efficient slicing, grooving, and jointing on CNC machining centres. The ground shank in H6 class protects the spindle from vibrations and prevents radial runout.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eRosette head geometry (CNR):\u003c\/strong\u003e The dedicated front design lowers resistance during axial lowering, allowing for stable entry into the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMulti-edge roughing system:\u003c\/strong\u003e Dense teeth finely crush chips, preventing separation of layers and fraying of edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNeutral chip ejection to the sides:\u003c\/strong\u003e The absence of pressure and lifting of the workpiece guarantees stable cutting and a clean profile on both sides.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e High hardness and wear resistance ensure longer tool life when machining abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e Precisely ground shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables safe and vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for rough cutting operations, axial entry into the material along the Z-axis, slicing, and jointing in composites and plywood on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: carbon fibre reinforced plastics (CFRP), glass fibre reinforced plastics (GFRP), CORIAN® composite boards, HPL laminates, and plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444670538068,"sku":"CNR.04.022.060.06R","price":18.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/CNR.04.022.060.06R_CNR.04.022.060.06R-109_475fbeda-bce1-41bc-9858-7dc21859c2b6.jpg?v=1793968630"},{"product_id":"fresa-para-composites-desbaste-d8-i30-l80-s8-rh","title":"Router bit for composites Roughing D8 I30 L80 S8 RH","description":"\u003ch2\u003eMulti-edge VHM spiral cutter for composites – rosette face (CNR) and machining without delamination\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eCNR.08.030.080.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial roughing cutter made from solid cemented carbide (VHM) with a rosette-type face (CNR) and neutral cutting edge geometry (chip removal to the sides). The front construction facilitates axial entry into the material along the Z-axis, reducing cutting resistance and eliminating the risk of damage to the structure upon entry. The multi-edge cutting system breaks the material, preventing the delamination of composites and the pulling out of glass and carbon fibres. The neutral cutting direction does not generate axial forces (either pushing or lifting), ensuring a high edge finishing standard on both sides of the plate. Designed for efficient cutting, grooving, and bonding on CNC machining centres. The ground shank in class H6 protects the spindle from vibrations and prevents radial runout.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eRosette cutting geometry (CNR):\u003c\/strong\u003e The dedicated front geometry reduces resistance during axial plunging, enabling stable entry into the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMulti-edge roughing system:\u003c\/strong\u003e Dense tooth configuration finely crushes chips, preventing the layers from peeling apart and edge fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNeutral chip removal to the sides:\u003c\/strong\u003e The absence of pressure or lifting of the workpiece ensures stable cutting and a clean profile on both sides.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid cemented carbide (VHM):\u003c\/strong\u003e High hardness and abrasion resistance provide a longer lifespan when working with abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Precisely ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables safe and vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for rough cutting operations, axial entry into the material, cutting, and bonding in composites and plywood on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: carbon fibre reinforced plastics (CFRP), glass fibre (GFRP), CORIAN® composite boards, HPL laminates, and plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444671291732,"sku":"CNR.08.030.080.08R","price":51.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/CNR.08.030.080.08R_CNR.08.030.080.08R-112.jpg?v=1791281611"},{"product_id":"fresa-para-composites-acabado-d10-i35-l80-s10-rh-2","title":"Router bit for composites Finishing D10 I35 L80 S10 RH","description":"\u003ch2\u003eMulti-edge spiral cutter VHM for composites – clean cutting without delaminating the material\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eCPS.10.035.080.10R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial multi-edge cutter made from solid carbide (VHM) designed for efficient machining of demanding composite materials. The special cutting edge arrangement protects the material from delamination and the pulling of glass and carbon fibres during machining. The right-hand screw line (positive geometry) efficiently lifts the chips upwards, preventing accumulation in the cutting zone and protecting the lower edge of the workpiece. The tool works well for precise cutting, shaping, and edge levelling on CNC machining centres and overhead milling machines. The precisely ground shank in the H6 accuracy class eliminates radial runout, protecting the machine's drive system from premature wear.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGeometry for composite materials:\u003c\/strong\u003e The multi-edge blade arrangement cleanly cuts through the material structure, preventing fraying and peeling of layers at the edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eChip evacuation upwards (positive):\u003c\/strong\u003e The right-hand chip channel effectively lifts dust and chips, protecting the underside of the workpiece from scratching.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh hardness carbide (VHM):\u003c\/strong\u003e The solid construction ensures wear resistance when working with highly abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the collet and secures the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Balancing according to ISO standards enables safe and vibration-free operation at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and range of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for formatting, cutting, and edge levelling operations on fibrous composites on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: carbon fibre reinforced plastics (CFRP), glass fibre reinforced plastics (GFRP), CORIAN® composite boards, and HPL laminates.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444671881556,"sku":"CPS.10.035.080.10R","price":51.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/CPS.10.035.080.10R_CPS.10.035.080.10R-104.jpg?v=1791281613"},{"product_id":"fresa-para-composites-acabado-d4-i15-l60-s4-rh-2","title":"Router bit for composites Finishing D4 I15 L60 S4 RH","description":"\u003ch2\u003eMultifunctional straight VHM milling cutter for composites – neutral chip ejection and protection against delamination\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eCSS.04.015.060.04R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial multi-edge milling cutter made from solid tungsten carbide (VHM) with a straightforward blade geometry (neutral chip ejection to the sides). Designed for precise machining of fibrous composites, it eliminates the risk of delamination of the structure and the pulling of glass and carbon fibres. The arrangement of straight cutting edges does not generate vertical forces (neither pressing nor lifting), ensuring a smooth finish and absence of tearing on both the upper and lower surfaces of the plate. The tool is effective for cutting, welding, and grooving on CNC machining centres and overhead milling machines. The ground shank in H6 class protects the spindle from vibrations and prevents radial runout.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eMultifunctional geometry for composites:\u003c\/strong\u003e The multi-edge cutting arrangement precisely shears the material, preventing layer separation and fraying of the fibres.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStraight geometry (sideward chip ejection):\u003c\/strong\u003e The neutral cutting direction eliminates pressure and lifting of the workpiece, providing clean edges on both sides.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid tungsten carbide (VHM):\u003c\/strong\u003e Wear-resistant material structure ensures a long service life when machining abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank protects the spindle taper and prevents tool movement in the holder.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures stable and vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, welding, and grooving operations in composite materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: fibre-reinforced plastics (CFRP), glass fibre (GFRP), composite boards CORIAN®, and HPL laminates.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444672110932,"sku":"CSS.04.015.060.04R","price":13.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/CSS.04.015.060.04R_CSS.04.015.060.04R-109_51cbd4a9-1d47-4192-a6c2-f4830a3f046a.jpg?v=1793968633"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-con-cuello-vhm-z1-d3-i16-l80-s8-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics with neck VHM Z1 D3 I16 L80 S8 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral end mill VHM for aluminium and plastics with upward chip ejection – clean bottom edge and efficient chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP02.03.016.080.08R1\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral end mill made from solid carbide (VHM) with positive geometry and undercut (upward chip ejection). The undercut design facilitates penetration into the material, reduces the overall friction surface, and ensures optimal chip flow, eliminating the risk of tool clogging during deep machining. The tool features a spiral angle of 30° and a polished chip flute, guaranteeing edge finishing. Designed for efficient cutting, grooving, and edge jointing and leveling in aluminium, ALU\/PVC profiles, plastics, and composites on CNC machining centres and overhead spindle milling machines. The use of a special grade of carbide extends tool life, and the possibility of applying protective coatings reduces friction and increases work efficiency. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 design with undercut (positive):\u003c\/strong\u003e Special undercut design facilitates entry into the material along the Z-axis, limits tool heating, and reduces cutting resistance during deep passes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpiral angle of 30° and polished flute:\u003c\/strong\u003e The precise spiral angle of 30° combined with the polished spiral surface eliminates chip welding and promotes smooth upward chip ejection.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecial grade of carbide (VHM):\u003c\/strong\u003e Enhanced wear resistance ensures long tool life during machining of non-ferrous metals and plastics.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOption for high-performance coatings:\u003c\/strong\u003e Design adapted for the application of protective coatings that reduce temperature in the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank surface prevents slippage in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, grooving, edge jointing, and leveling operations in aluminium and profiles on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, aluminium and PVC profiles, ALUCOBOND® plates, ALUCOBOND® A2, and plastics.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444688986452,"sku":"SP02.03.016.080.08R1","price":35.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP02.03.016.080.08R1_198.03.016.080.08RM1-108.jpg?v=1791281689"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-con-cuello-vhm-z1-d4-i16-l80-s8-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics with neck VHM Z1 D4 I16 L80 S8 RH Finishing positive","description":"\u003ch2\u003eSingle-flute spiral milling cutter VHM for aluminium and plastics with upward chip removal – clean lower edge and efficient chip extraction\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP02.04.016.080.08R1\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-flute spiral milling cutter made from solid carbide (VHM) with positive geometry and undercut (upward chip removal). The undercut body design facilitates penetration into the material, reduces total friction surface, and ensures optimal chip flow, eliminating the risk of tool clogging during deep machining. The tool features a screw angle of 30° and a polished chip flute, guaranteeing edge finishing. Designed for efficient cutting, grooving, and seam welding and edge aligning in aluminium, ALU\/PVC profiles, plastics, and composites on CNC machining centres and gantry milling machines. The use of a special grade of carbide extends tool life, and the possibility of applying protective coatings allows for reduced friction and increased work efficiency. The ground shank in H6 accuracy class eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-flute Z1 construction with undercut (positive):\u003c\/strong\u003e Special body undercut facilitates material entry along the Z-axis, reduces tool heating, and decreases cutting resistance during deep passes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpiral angle of 30° and polished flute:\u003c\/strong\u003e The precise 30° screw angle combined with the polished spiral surface eliminates chip welding and promotes smooth upward chip removal.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecial grade of carbide (VHM):\u003c\/strong\u003e Increased resistance to abrasive wear ensures long tool life when machining non-ferrous metals and plastics.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOption for high-end coatings:\u003c\/strong\u003e Design adapted for the application of protective coatings that reduce the temperature in the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground grip surface prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, grooving, seam welding, and edge aligning in aluminium and profiles on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, aluminium and PVC profiles, ALUCOBOND® sheets, ALUCOBOND® A2, and plastics.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444689510740,"sku":"SP02.04.016.080.08R1","price":35.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP02.04.016.080.08R1_198.04.016.080.08RM1_1-111.jpg?v=1791281692"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z2-d3-i10-l60-s3-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z2 D3 I10 L60 S3 RH Finishing positive","description":"\u003ch2\u003eDual-edged spiral end mill VHM for aluminium and plastics with upward chip evacuation – clean bottom edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSQ01.03.010.060.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial dual-edged spiral end mill made of solid cemented carbide (VHM) with positive geometry (upward chip evacuation). The configuration of two cutting edges (Z2) ensures higher tool rigidity, reduces vibrations, and allows for higher feed rates while maintaining stability. The right-handed helical flute effectively lifts the chips upward, guaranteeing cleanliness and preventing tear-out on the bottom edge of the workpiece. Designed for precision cutting, stitching, and edge trimming in aluminium, plastics, and composite materials on CNC machining centres and overhead milling machines. The finishing geometry combined with polished chip flutes prevents chip adhesion to the body. The ground shank in H6 accuracy class eliminates radial runout, protecting the machine spindle.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDual-edged design Z2 (positive):\u003c\/strong\u003e Two cutting edges increase the rigidity of the mill and allow for increased feed speed with very smooth guidance in the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive geometry (upward chip evacuation):\u003c\/strong\u003e The right-handed spiral directs the chips upwards, preventing fraying and tear-out on the underside of the workpiece.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes:\u003c\/strong\u003e The mirror-like surface of the spiral reduces friction, effectively preventing chip adhesion and welding to the body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing cutter geometry:\u003c\/strong\u003e Precisely ground cutting edges ensure a smooth finish on the machined surfaces.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid cemented carbide (VHM):\u003c\/strong\u003e The rigid and wear-resistant structure of the solid material reduces vibrations and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as stitching and edge trimming in aluminium, plastics, and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: aluminium, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444690067796,"sku":"SQ01.03.010.060.03R","price":13.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SQ01.03.010.060.03R_186.03.010.060.03RA-111.jpg?v=1791281694"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z2-d4-i10-l60-s4-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z2 D4 I10 L60 S4 RH Finishing positive","description":"\u003ch2\u003eTwo-flute spiral end mill VHM for aluminium and plastics with upward chip removal – clean bottom edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSQ01.04.010.060.04R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute spiral end mill made from solid carbide (VHM) with positive geometry (upward chip removal). The arrangement of two cutting edges (Z2) ensures higher tool stiffness, reduced vibration, and the ability to use higher feed rates while maintaining stability. The right-hand helix effectively elevates the chips upwards, guaranteeing cleanliness and preventing tearing on the bottom edge of the workpiece. Dedicated to precision cutting, edge welding, and alignment in aluminium, plastics, and composite materials on CNC machining centres and vertical milling machines. The finishing geometry combined with polished flutes prevents chips from sticking to the tool body. Ground shank in H6 accuracy class eliminates radial runout, protecting the machine spindle.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute design Z2 (positive):\u003c\/strong\u003e Two cutting edges increase the rigidity of the mill and allow for higher feed speeds while maintaining a smooth engagement in the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive geometry (upward chip removal):\u003c\/strong\u003e The right-hand helix directs chips upwards, preventing fraying and tearing on the underside of the workpiece.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished flutes:\u003c\/strong\u003e The mirror-like surface of the helix reduces friction, effectively preventing chips from sticking and welding to the body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing edge geometry:\u003c\/strong\u003e Precisely sharpened cutting edges ensure a smooth finish on machined surfaces.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid and wear-resistant structure of the solid carbide reduces vibrations and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, edge welding, and alignment in aluminium, plastics, and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: aluminium, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444690329940,"sku":"SQ01.04.010.060.04R","price":12.42,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SQ01.04.010.060.04R_186.04.010.060.04RA-107.jpg?v=1791281696"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z1-d3-i6-l60-s6-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z1 D3 I6 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edge Spiral End Mill VHM for Aluminium with Upward Chip Ejection – Clean Bottom Edge and Efficient Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP01.03.006.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edge spiral end mill made from solid carbide (VHM) with positive geometry (upward chip ejection). Designed for efficient and precise cutting, welding, and edge finishing in aluminium, composite materials, and plastics on CNC machining centres and overhead milling machines. The finishing geometry with a single edge (Z1) combined with a polished flute effectively prevents chip adhesion and material build-up on the cutting edge. The right-hand spiral rapidly removes chips upwards, protecting the cutting zone from overheating and ensuring a clean, finished edge surface. The ground shank in H6 accuracy class eliminates radial runout, protecting the machine drive system and guaranteeing a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eDesign Benefits and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-Edge Design Z1 (Positive):\u003c\/strong\u003e The single cutting edge provides a large chip space, enabling immediate chip evacuation and reducing cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Flute:\u003c\/strong\u003e The mirror finish of the flute surface prevents chip adhesion and welding of aluminium chips to the cutter body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Blade Geometry:\u003c\/strong\u003e The precisely ground edge allows for a clean surface without the need for additional finishing operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e The rigid VHM construction dampens vibrations and ensures a long tool life when working with non-ferrous metals.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing Class G2.5:\u003c\/strong\u003e Balancing according to ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Application Scope:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, welding, and edge finishing in aluminium and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, ALUCOBOND® panels, ALUCOBOND® A2, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444690886996,"sku":"SP01.03.006.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP01.03.006.060.06RE_SP01.03.006.060.06RE-112.jpg?v=1791281699"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z1-d3-i12-l60-s6-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z1 D3 I12 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-flute spiral end mill VHM for aluminium with upward chip removal – clean bottom edge and efficient chip evacuation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP01.03.012.060.06HR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-flute spiral end mill made of solid carbide (VHM) with positive geometry (upward chip removal). Designed for efficient and precise cutting, welding, and edge trimming of aluminium, composite materials, and plastics on CNC machining centres and vertical milling machines. The finishing geometry with a single cutting edge (Z1) combined with a polished chip groove effectively prevents chip adhesion and material buildup on the cutting edge. The right-handed spiral flute quickly removes chips upwards, protecting the cutting area from overheating and ensuring a clean, finished edge surface. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-flute Z1 (positive) design:\u003c\/strong\u003e The single cutting edge provides a large chip space, allowing for immediate chip evacuation and reducing cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror-finished surface of the spiral prevents chip adhesion and welding of aluminium chips to the body of the mill.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the cutting edge:\u003c\/strong\u003e Precisely sharpened edge allows for achieving a clean surface without the need for additional finishing machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid structure of VHM dampens vibrations and ensures long tool life when working with non-ferrous metals.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to class G2.5:\u003c\/strong\u003e Balancing according to ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting as well as welding and trimming edges in aluminium and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: aluminium, ALUCOBOND® sheets, ALUCOBOND® A2, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444691312980,"sku":"SP01.03.012.060.06HR","price":32.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP01.03.012.060.06HR_198.03.012.060.06HRA-103.jpg?v=1791281702"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z1-d4-i8-l60-s6-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z1 D4 I8 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-flute spiral end mill VHM for aluminium with upward chip ejection – clean bottom edge and efficient chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP01.04.008.060.06HE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-flute spiral end mill made from solid carbide (VHM) with positive geometry (upward chip ejection). Designed for efficient and precise cutting, as well as edge jointing and levelling in aluminium, composite materials, and plastics on CNC machining centres and overhead spindle mills. The finishing geometry with a single cutting edge (Z1) combined with a polished chip groove effectively prevents material build-up on the cutting edge. The right-hand spiral quickly removes the chips upwards, protecting the cutting area from overheating and ensuring a clean, finished edge surface. The ground shank with H6 accuracy eliminates radial runout, protecting the machine's drive system and guaranteeing a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-flute Z1 (positive) design:\u003c\/strong\u003e The single cutting edge provides a large chip space, enabling immediate chip evacuation and reducing cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror finish of the spiral surface prevents chips from aluminium sticking and welding to the body of the mill.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e Precisely sharpened edge allows for achieving a clean surface without the need for additional finishing operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid VHM construction dampens vibrations and ensures a long tool life when working with non-ferrous metals.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations as well as edge jointing and levelling in aluminium and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in machining materials such as: aluminium, ALUCOBOND® panels, ALUCOBOND® A2, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444691706196,"sku":"SP01.04.008.060.06HE","price":32.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP01.04.008.060.06HE_SP01.04.008.060.06HE-112.jpg?v=1791281704"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z1-d4-i8-l60-s6-rh-acabado-positivo-1","title":"Spiral router bit for aluminum \u0026 plastics VHM Z1 D4 I8 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral end mill VHM for aluminium with upward chip removal – clean lower edge and efficient chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP01.04.008.060.06HR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral end mill made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for efficient and precise cutting as well as edge welding and levelling in aluminium, composite materials, and plastics on CNC machining centres and overhead milling machines. Finishing geometry with a single cutting edge (Z1), combined with a polished chip flute, effectively prevents chip sticking and material build-up on the cutting edge. The right-hand spiral geometry rapidly removes debris upwards, protecting the cutting zone from overheating and ensuring a clean, finished edge surface. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 (positive) design:\u003c\/strong\u003e The single cutting edge provides a large chip space, allowing for immediate chip evacuation and reducing cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flute:\u003c\/strong\u003e The mirror finish of the spiral surface prevents chips of aluminium from sticking and welding to the body of the mill.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e The precisely sharpened edge allows for a clean surface without the need for additional finishing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid VHM construction dampens vibrations and ensures a long tool life when working with non-ferrous metals.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations as well as edge welding and levelling in aluminium and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, ALUCOBOND® panels, ALUCOBOND® A2, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444692197716,"sku":"SP01.04.008.060.06HR","price":32.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP01.04.008.060.06HR_198.04.008.060.06hra-109_2fadfe8e-99b8-4b09-97d6-5702ae17f1ab.jpg?v=1793969477"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z1-d4-i8-l60-s6-rh-acabado-positivo-2","title":"Spiral router bit for aluminum \u0026 plastics VHM Z1 D4 I8 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-blade spiral end mill VHM for aluminium with upward chip removal – clean bottom edge and efficient chip evacuation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP01.04.008.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-blade spiral end mill made of solid carbide (VHM) with positive geometry (upward chip removal). Designed for efficient and precise cutting, welding, and edge trimming in aluminium, composite materials, and plastics on CNC machining centres and overhead spindle milling machines. The finishing geometry with a single cutting edge (Z1) combined with a polished flute effectively prevents build-up and material accumulation on the cutting edge. The right-hand spiral instantly evacuates chips upwards, protecting the cutting zone from overheating and ensuring a clean, finished edge surface. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and guaranteeing a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edge design Z1 (positive):\u003c\/strong\u003e The single cutting edge provides a large chip space, allowing for immediate chip evacuation and reducing cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished flute:\u003c\/strong\u003e The mirror-finish surface of the spiral prevents sticking and welding of aluminium chips to the body of the mill.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing edge geometry:\u003c\/strong\u003e Precisely sharpened edge enables a clean surface finish without the need for additional finishing operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid VHM construction dampens vibrations and ensures a long tool life when working with non-ferrous metals.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations as well as welding and edge trimming in aluminium and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, ALUCOBOND® sheets, ALUCOBOND® A2, plastics, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444692328788,"sku":"SP01.04.008.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP01.04.008.060.06RE_SP01.04.008.060.06RE-112.jpg?v=1791281711"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z1-d4-i22-l60-s6-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z1 D4 I22 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-flute spiral end mill for aluminium with upward chip ejection – clean bottom edge and efficient chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP01.04.022.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-flute spiral end mill made from solid carbide (VHM) with positive geometry (upward chip ejection). Designed for efficient and precise cutting, welding and edge smoothing in aluminium, composite materials and plastics on CNC machining centres and overhead milling machines. The finishing geometry with a single cutting edge (Z1) combined with a polished chip flute effectively prevents sticking and buildup of material on the cutting edge. The right-hand spiral quickly evacuates chips upwards, protecting the cutting zone from overheating and ensuring a clean, finished edge surface. The ground shank with accuracy class H6 eliminates radial runout, protects the machine’s drive system, and guarantees a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edge Z1 (positive) design:\u003c\/strong\u003e The single cutting edge provides a large chip space, allowing for immediate chip evacuation and reducing cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flute:\u003c\/strong\u003e The mirror finish of the flute surface prevents the sticking and welding of aluminium chips to the body of the mill.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e The precisely ground edge allows for achieving a clean surface without the need for additional finishing machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid VHM construction dampens vibrations and ensures a long tool life when working with non-ferrous metals.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e The balancing compliant with ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and area of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, welding and edge smoothing operations in aluminium and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, ALUCOBOND® panels, ALUCOBOND® A2, plastics and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444692722004,"sku":"SP01.04.022.060.06R","price":27.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP01.04.022.060.06R_198.04.022.060.06RA-108.jpg?v=1793968355"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z1-d5-i15-l60-s6-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z1 D5 I15 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral cutter VHM for aluminium with upward chip ejection – clean lower edge and efficient chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP01.05.015.060.06HR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip ejection). Designed for efficient and precise cutting as well as edge welding and aligning in aluminium, composite materials, and plastics on CNC machining centres and overhead spindle milling machines. The finishing geometry with a single edge (Z1) combined with a polished chip flute effectively prevents the adhesion and build-up of material on the cutting edge. The right-hand screw line quickly removes chips upwards, protecting the cutting zone from overheating and guaranteeing a clean, finished edge surface. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine drive system and ensuring a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged design Z1 (positive):\u003c\/strong\u003e The single cutting edge provides a large chip space, allowing for immediate chip evacuation and reducing cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flute:\u003c\/strong\u003e The mirror finish of the spiral surface prevents adhesion and welding of aluminium chips to the cutter body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e The precisely ground edge allows for a clean surface without the need for additional finishing operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMonolithic carbide (VHM):\u003c\/strong\u003e The rigid VHM construction dampens vibrations and ensures a long tool life when working with non-ferrous metals.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, welding, and aligning edges in aluminium and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, ALUCOBOND® panels, ALUCOBOND® A2, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444693311828,"sku":"SP01.05.015.060.06HR","price":33.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP01.05.015.060.06HR_SP01.05.015.060.06HR-108.jpg?v=1793968355"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z1-d6-i12-l60-s6-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z1 D6 I12 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-flute spiral end mill VHM for aluminium with upward chip ejection – clean bottom edge and efficient chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSP01.06.012.060.06HE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-flute spiral end mill made from solid carbide (VHM) with positive geometry (upward chip ejection). Designed for efficient and precise cutting as well as joining and edge truing in aluminium, composite materials, and plastics on CNC machining centres and vertical milling machines. The finishing geometry with a single cutting edge (Z1) combined with a polished chip groove effectively prevents adhesion and build-up of material on the cutting edge. The right-hand screw line quickly evacuates the chips upwards, protecting the cutting zone from overheating and ensuring a clean, finished edge surface. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and guaranteeing a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edge design Z1 (positive):\u003c\/strong\u003e The single cutting edge provides a large chip space, allowing for immediate evacuation of chips and reducing cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror finish of the spiral surface prevents the welding of aluminium chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e Precisely ground edge allows for achieving a clean surface without the need for additional finishing machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid VHM construction dampens vibrations and ensures a long tool life when working with non-ferrous metals.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations as well as joining and edge truing in aluminium and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, ALUCOBOND® panels, ALUCOBOND® A2, plastics, as well as composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444693999956,"sku":"SP01.06.012.060.06HE","price":32.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SP01.06.012.060.06HE_SP01.06.012.060.06HE-112.jpg?v=1794296953"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/collections\/dbcbf63a-7e4d-4aa4-8d5e-865ed0b01476.jpg?v=1793780681","url":"https:\/\/es.ita.tools\/en\/collections\/herramientas-pcd-y-vhm-para-composites.oembed","provider":"ITA TOOLS","version":"1.0","type":"link"}