{"title":"Spiral router bits","description":"","products":[{"product_id":"fresa-helicoidal-de-punta-esferica-con-cuello-para-relieves-3d-vhm-z2-d20-i40-l150-s20-rh-acabado-positivo","title":"Ball nose spiral router bit with neck for 3D reliefs VHM Z2 D20 I40 L150 S20 RH Finishing positive","description":"\u003ch2\u003eTwo-edged VHM ball nose spiral cutter from the SQ32 series for 3D flat relief machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSQ32.20.040.150.20R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial ball nose spiral cutter made from solid sintered carbide \u003cstrong\u003eVHM\u003c\/strong\u003e from the \u003cstrong\u003eSQ32\u003c\/strong\u003e series, with positive geometry (chip removal upwards). The tool features an extended body with a taper above the working part, designed for deep machining of 3D models, cutting, and edge joining and aligning on CNC machines. The polished surface of the chip groove prevents the machined material from sticking and facilitates the quick evacuation of swarf. The spherical front radius combined with the finishing geometry of two edges (Z2) allows for achieving smooth surfaces. The ground shank in accuracy class H6 eliminates radial runout, protecting the drive system and guaranteeing a high level of machining stability.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eExtended body with undercut:\u003c\/strong\u003e The special taper of the working part allows safe and precise work in deep cavities and 3D forms without the risk of the body colliding with the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e Advanced polishing of the screw effectively removes chips, prevents the sticking of swarf, and reduces cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBall nose Z2 design with upward chip removal:\u003c\/strong\u003e The right-hand screw line ejects the chip upwards, ensuring cleanliness in the cutting area and high surface quality.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing edge geometry:\u003c\/strong\u003e Precisely sharpened cutting edges allow for a clean edge finish without the need for additional processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures quiet and stable operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for precise machining of molds and 3D models, cutting, and edge joining and aligning on CNC machining centres.\u003c\/p\u003e\u003cp\u003eIt works excellently for machining materials such as aluminium, CORIAN® composites, and HPL plates.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444577771860,"sku":"SQ32.20.040.150.20R","price":405.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SQ32.20.040.150.20R_199.20.040.150.20ram-108.jpg?v=1791281173"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z3-d6-i22-l60-s6-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z3 D6 I22 L60 S6 RH Finishing positive","description":"\u003ch2\u003eThree-flute spiral end mill VHM for aluminium and plastics with upward chip removal – clean bottom edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSR01.06.022.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial three-flute spiral end mill made from solid carbide (VHM) with positive geometry (upward chip removal). The arrangement of three cutting edges (Z3) ensures higher rigidity of the body and the ability to work with significantly higher feed rates compared to two-flute tools. The right-hand spiral effectively removes chips upwards, guaranteeing a clean and tear-free bottom edge. Designed for highly efficient cutting, grooving, and edge routing in aluminium, plastics, and composites on CNC machining centres and overhead milling machines. The finishing geometry of the cutting edges combined with polished chip flutes prevents chip build-up on the tool body. The ground shank in class H6 accuracy eliminates radial run-out, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThree-flute design Z3 (positive):\u003c\/strong\u003e Three cutting edges allow for a significant increase in feed speed while maintaining smooth cutting and high-quality finishes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive geometry (upward chip removal):\u003c\/strong\u003e The right-hand spiral lifts the chips upwards, effectively preventing tearing and fraying on the underside of the machined plate.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes:\u003c\/strong\u003e The mirror-like surface of the spiral reduces friction and prevents chip welding onto the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the cutting edge:\u003c\/strong\u003e Precision finishing of the cutting edges ensures a smooth surface after machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid and wear-resistant structure of the solid carbide guarantees long tool life and dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and range of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, as well as grooving and edge routing in aluminium, plastics, and composite materials on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444626497876,"sku":"SR01.06.022.060.06R","price":18.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SR01.06.022.060.06R_193.06.022.060.06RA-107.jpg?v=1791281427"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d4-i12-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D4 I12 L60 S6 RH Finishing positive","description":"\u003ch1\u003eSpiral mill for plexiglass and VHM plastics Z1 D4 I12 L60 S6 RH finishing positive\u003c\/h1\u003e\n\n\u003cp\u003eMonolithic Premium carbide mill designed for precise edge machining and cutting on CNC machines. The use of a single cutter (Z1) with a right-hand positive geometry ensures effective upward chip removal, protecting the cutting zone from sticking and overheating. The polished chip groove enhances material flow, allowing for a clean edge of the machined polymethyl methacrylate (PMMA) without the need for additional finishing processing.\u003c\/p\u003e\n\n\u003cp\u003eApplication: plastics (plexi\/PMMA), composite boards (Alucobond®, Alucobond® A2), mineral-acrylic materials (Corian®) and decorative laminates (HPL). Purpose: CNC machining centres, milling plotters.\u003c\/p\u003e\n\n\u003ch2\u003eApplication ST01.04.012.060.06RE:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: cutting, contour milling.\u003c\/li\u003e\n\u003cli\u003ePurpose: machining Plexi, Composite board AL-A2-AL \/ Etalbond® A2, Composite board AL-PE-AL \/ Alucobond®, Plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ITA TOOLS\u003c\/li\u003e\n\u003cli\u003eDiameter D: 4 mm\u003c\/li\u003e\n\u003cli\u003eWorking length I: 12 mm\u003c\/li\u003e\n\u003cli\u003eTotal length L: 60 mm\u003c\/li\u003e\n\u003cli\u003eShank diameter S: 6 mm\u003c\/li\u003e\n\u003cli\u003eNumber of blades Z: 1\u003c\/li\u003e\n\u003cli\u003eDirection of axial angle: positive\u003c\/li\u003e\n\u003cli\u003eType of processing: finishing\u003c\/li\u003e\n\u003cli\u003eGrip: Cylindrical grip\u003c\/li\u003e\n\u003cli\u003eMill construction: Monolith\u003c\/li\u003e\n\u003cli\u003eBody material: VHM\u003c\/li\u003e\n\u003cli\u003eBlade material: VHM\u003c\/li\u003e\n\u003cli\u003eFace geometry: Straight\u003c\/li\u003e\n\u003cli\u003eDisplay packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444626694484,"sku":"ST01.04.012.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.04.012.060.06RE_ST01.04.012.060.06RE-112.jpg?v=1791281430"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d8-i32-l80-s8-rh-acabado","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D8 I32 L80 S8 RH Finishing ","description":"\u003ch1\u003eSpiral end mill for plexiglass and VHM materials Z1 D8 I32 L80 S8 RH finishing positive\u003c\/h1\u003e\n\n\u003cp\u003eMonolithic Premium carbide end mill designed for precise edge machining and cutting on CNC machines. The use of a single flute (Z1) with a right-hand positive geometry guarantees effective upward chip removal, protecting the cutting zone from binding and heating. The polished chip flute improves material flow, allowing for a clean edge on the cut polymethyl methacrylate (PMMA) without the need for additional finishing machining.\u003c\/p\u003e\n\n\u003cp\u003eApplications: plastics (plexi\/PMMA), composite panels (Alucobond®, Alucobond® A2), mineral-acrylic materials (Corian®) and finishing laminates (HPL). Intended for: CNC machining centres, milling plotters.\u003c\/p\u003e\n\n\u003ch2\u003eApplication ST01.08.032.080.08R:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: cutting, contour milling.\u003c\/li\u003e\n\u003cli\u003eIntended for: processing plexiglass, composite panel AL-A2-AL \/ Etalbond® A2, composite panel AL-PE-AL \/ Alucobond®, plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ITA TOOLS\u003c\/li\u003e\n\u003cli\u003eDiameter D: 8 mm\u003c\/li\u003e\n\u003cli\u003eWorking length I: 32 mm\u003c\/li\u003e\n\u003cli\u003eTotal length L: 80 mm\u003c\/li\u003e\n\u003cli\u003eShank diameter S: 8 mm\u003c\/li\u003e\n\u003cli\u003eNumber of flutes Z: 1\u003c\/li\u003e\n\u003cli\u003eAxial angle direction: positive\u003c\/li\u003e\n\u003cli\u003eType of machining: finishing\u003c\/li\u003e\n\u003cli\u003eShank: Cylindrical shank\u003c\/li\u003e\n\u003cli\u003eMill construction: Monolith\u003c\/li\u003e\n\u003cli\u003eBody material: VHM\u003c\/li\u003e\n\u003cli\u003eBlade material: VHM\u003c\/li\u003e\n\u003cli\u003eFace geometry: Flat\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444627284308,"sku":"ST01.08.032.080.08R","price":34.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.08.032.080.08R_198.08.032.080.08RP-108.jpg?v=1791281433"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d3-i6-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D3 I6 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-edge spiral milling cutter VHM for PLEXI with upward chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.03.006.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edge spiral milling cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, edging and trimming in Plexiglas, plastics and composites on CNC machines and overhead milling machines. The finishing geometry with a single blade (Z1) combined with a polished chip groove effectively prevents material sticking and melting. The right-hand helical flute efficiently evacuates chips upwards, protecting the cutting zone from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edge design Z1 (positive):\u003c\/strong\u003e The single cutting edge allows rapid removal of large amounts of material, minimising friction and risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror finish of the spiral prevents sticking and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e The precisely sharpened edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid VHM construction reduces vibrations and maintains dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and usage range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, edging, and trimming in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444629119316,"sku":"ST01.03.006.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.03.006.060.06RE_ST01.03.006.060.06RE-112.jpg?v=1791281444"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d3-i8-l60-s3-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D3 I8 L60 S3 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral cutter VHM for PLEXI with upward chip removal – clean lower edge and efficient chip evacuation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.03.008.060.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). The tool is equipped with a small angle of helix, which effectively prevents lifting and vibrations of the processed material. It is perfect for precise cutting, welding, and aligning edges of thin materials with thicknesses from 1 mm to 8 mm on CNC machines and overhead milling machines. The finishing geometry with a single edge (Z1) combined with a polished chip groove prevents sticking and melting of the material. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring stability during machining.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated to thin materials (1–8 mm):\u003c\/strong\u003e Reduced spiral eliminates upward pulling forces, preventing lifting of flexible sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 design (positive):\u003c\/strong\u003e The single cutting edge allows for efficient chip removal, minimising friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror surface of the spiral prevents sticking and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e Precisely sharpened edge guarantees perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations as well as welding and aligning edges in thin plastic sheets on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444629446996,"sku":"ST28.03.008.060.03R","price":15.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.03.008.060.03R_198.03.008.060.03RPS5903247148847-101.jpg?v=1791281446"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d4-i12-l60-s4-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D4 I12 L60 S4 RH Finishing positive","description":"\u003ch1\u003eSpiral end mill for plexiglass and VHM materials Z1 D4 I12 L60 S4 RH finishing positive\u003c\/h1\u003e\n\n\u003cp\u003ePremium carbide monolithic end mill designed for precise edge machining and cutting on CNC machines. The use of a single flute (Z1) with a right-hand positive geometry ensures effective upward chip removal, protecting the cutting zone from sticking and overheating. The polished fluted channel streamlines material flow, allowing for a clean edge on the machined polymethyl methacrylate (PMMA) without the need for additional finishing work.\u003c\/p\u003e\n\n\u003cp\u003eApplication: plastics (plexi\/PMMA), composite panels (Alucobond®, Alucobond® A2), mineral-acrylic materials (Corian®), and decorative laminates (HPL).\u003c\/p\u003e\n\u003cp\u003eIntended for: CNC machining centres, milling plotters.\u003c\/p\u003e\n\n\u003ch2\u003eApplication ST01.04.012.060.04R:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: Cutting, Contour milling.\u003c\/li\u003e\n\u003cli\u003eIntended for: machining Plexi, AL-A2-AL composite panel \/ Etalbond® A2, AL-PE-AL composite panel \/ Alucobond®, Plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ITA TOOLS\u003c\/li\u003e\n\u003cli\u003eDiameter D: 4 mm\u003c\/li\u003e\n\u003cli\u003eWorking length I: 12 mm\u003c\/li\u003e\n\u003cli\u003eTotal length L: 60 mm\u003c\/li\u003e\n\u003cli\u003eShank diameter S: 4 mm \u003c\/li\u003e\n\u003cli\u003eNumber of flutes Z: 1 \u003c\/li\u003e\n\u003cli\u003eDirection of axial angle: positive \u003c\/li\u003e\n\u003cli\u003eType of machining: finishing\u003c\/li\u003e\n\u003cli\u003eShank: Cylindrical shank\u003c\/li\u003e\n\u003cli\u003eEnd mill construction: Monolithic\u003c\/li\u003e\n\u003cli\u003eBody material: VHM\u003c\/li\u003e\n\u003cli\u003eBlade material: VHM\u003c\/li\u003e\n\u003cli\u003eFace geometry: Straight\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444630266196,"sku":"ST01.04.012.060.04R","price":18.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.04.012.060.04R_ST01.04.012.060.04R-212.jpg?v=1791281450"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d4-i15-l60-s4-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D4 I15 L60 S4 RH Finishing positive","description":"\u003ch1\u003eSpiral end mill for plexiglass and VHM materials Z1 D4 I15 L60 S4 RH finishing positive\u003c\/h1\u003e\n\n\u003cp\u003eMonolithic end mill made of premium carbide designed for precise edge machining and cutting on CNC machines. The use of a single flute (Z1) with a right-hand positive geometry ensures effective upward chip removal, protecting the cutting zone from sticking and overheating. The polished flutes improve material flow, allowing for a clean edge on the machined polymethyl methacrylate (PMMA) without the need for additional finishing work.\u003c\/p\u003e\n\n\u003cp\u003eApplication: plastics (plexi\/PMMA), composite panels (Alucobond®, Alucobond® A2), mineral-acrylic materials (Corian®) and finishing laminates (HPL).\u003c\/p\u003e\n\u003cp\u003eIntended use: CNC machining centres, milling plotters.\u003c\/p\u003e\n\n\u003ch2\u003eApplication ST01.04.015.060.04R:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApplication: cutting, contour milling.\u003c\/li\u003e\n\u003cli\u003eIntended use: machining plexiglass, composite panel AL-A2-AL \/ Etalbond® A2, composite panel AL-PE-AL \/ Alucobond®, plastics.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecification:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: ITA TOOLS\u003c\/li\u003e\n\u003cli\u003eDiameter D: 4 mm\u003c\/li\u003e\n\u003cli\u003eWorking length I: 15 mm\u003c\/li\u003e\n\u003cli\u003eTotal length L: 60 mm\u003c\/li\u003e\n\u003cli\u003eShank diameter S: 4 mm \u003c\/li\u003e\n\u003cli\u003eNumber of flutes Z: 1 \u003c\/li\u003e\n\u003cli\u003eDirection of axial angle: positive \u003c\/li\u003e\n\u003cli\u003eType of machining: finishing\u003c\/li\u003e\n\u003cli\u003eShank: Cylindrical shank\u003c\/li\u003e\n\u003cli\u003eEnd mill structure: Monolith\u003c\/li\u003e\n\u003cli\u003eBody material: VHM\u003c\/li\u003e\n\u003cli\u003eBlade material: VHM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444630692180,"sku":"ST01.04.015.060.04R","price":18.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.04.015.060.04R_198.04.015.060.04RP-108.jpg?v=1791281452"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d2-i6-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D2 I6 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral cutter VHM for PLEXI with upward chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.02.006.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, bonding, and edge finishing in plexiglass, plastics, and composites on CNC machines and overhead spindle milling machines. The finishing geometry with one edge (Z1) combined with a polished chip groove effectively prevents material sticking and melting. The right-hand screw line efficiently removes chips upwards, protecting the cutting zone from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 (positive) design:\u003c\/strong\u003e The single cutting edge allows for quick removal of large amounts of material, minimising friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror-like surface of the spiral prevents sticking and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing edge geometry:\u003c\/strong\u003e Precisely ground edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMonolith of sintered carbide (VHM):\u003c\/strong\u003e The rigid VHM construction reduces vibrations and maintains dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as bonding and edge finishing in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the processing of materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444630987092,"sku":"ST01.02.006.060.06R","price":26.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.02.006.060.06R_ST01.02.006.060.06R-111.jpg?v=1791281455"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d3-i12-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D3 I12 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-blade spiral end mill VHM for PLEXI with upward chip removal – clean bottom edge and efficient chip evacuation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.03.012.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-blade spiral end mill made from solid sintered carbide (VHM) with positive geometry (upward chip removal). The tool is equipped with a small angle of the helical line, which effectively prevents lifting and vibrations of the processed material. It is excellent for precise cutting, joining and edging thin materials with a thickness of 1 mm to 8 mm on CNC machines and overhead spindle milling machines. The finishing geometry with a single blade (Z1) combined with a polished fluting prevents sticking and melting of the chips. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring processing stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated to thin materials (1–8 mm):\u003c\/strong\u003e Reduced spiral eliminates upward pulling forces, preventing the lifting of flimsy sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-blade Z1 (positive) design:\u003c\/strong\u003e The single cutting blade allows for efficient chip removal, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished fluting:\u003c\/strong\u003e The mirror-like surface of the spiral prevents chip binding and re-welding of chips with the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e Precisely sharpened edge ensures perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as joining and edging in thin sheets of plastic on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2 and composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444631118164,"sku":"ST28.03.012.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.03.012.060.06RE_ST28.03.012.060.06RE-112.jpg?v=1791281457"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d5-i40-l100-s8-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D5 I40 L100 S8 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Cutter VHM for PLEXI with Upward Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.05.040.100.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, joining, and edge finishing in plexiglass, plastics, and composites on CNC machines and overhead milling machines. The finishing geometry with a single edge (Z1) combined with a polished chip flute effectively prevents material sticking and melting. The right-hand spiral efficiently evacuates chips upward, protecting the cutting zone from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in H6 accuracy class eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-Edge Design Z1 (Positive):\u003c\/strong\u003e The single cutting edge allows for quick removal of large amounts of material, minimising friction and the risk of overheating the plastic.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flute:\u003c\/strong\u003e The mirror-like surface of the spiral prevents sticking and re-welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Blade Geometry:\u003c\/strong\u003e Precisely ground edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e The rigid design of VHM reduces vibrations and helps maintain dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Balancing compliant with ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as jointing and edge finishing in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for processing materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444632625492,"sku":"ST01.05.040.100.08R","price":40.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.05.040.100.08R_198.050.40.100.08RP-104.jpg?v=1791281465"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d4-i12-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D4 I12 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Milling Cutter VHM for PLEXI with upward chip removal – clean bottom edge and efficient chip disposal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.04.012.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral milling cutter made from solid carbide (VHM) with positive geometry (upward chip removal). The tool features a small helix angle, which effectively prevents lifting and vibration of the workpiece material. It excels in precision cutting, edge welding, and aligning thin materials with a thickness of 1 mm to 8 mm on CNC machines and overhead spindle milling machines. The finishing geometry with a single cutting edge (Z1) combined with a polished chip groove prevents stickiness and melting of the material. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring processing stability.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated for thin materials (1–8 mm):\u003c\/strong\u003e Reduced spiral eliminates upward pulling forces, preventing the lifting of flimsy sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged design Z1 (positive):\u003c\/strong\u003e The single cutting edge allows for efficient chip removal, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror-like surface of the spiral prevents adhesion and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e Precisely sharpened edge ensures perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground grip surface prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, as well as welding and aligning edges in thin plastic sheets on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444633805140,"sku":"ST28.04.012.060.06RE","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.04.012.060.06RE_ST28.04.012.060.06RE-112.jpg?v=1794296942"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z3-d8-i35-l80-s8-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z3 D8 I35 L80 S8 RH Finishing positive","description":"\u003ch2\u003e3-Flute VHM Spiral Milling Cutter for Aluminium and Plastics with Upward Chip Removal – Clean Bottom Edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSR01.08.035.080.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial 3-flute spiral milling cutter made from solid carbide (VHM) with positive geometry (upward chip removal). The arrangement of three cutting edges (Z3) provides higher rigidity of the body and allows for significantly higher feed rates compared to two-flute tools. The right-hand screw line efficiently removes chips upwards, ensuring a clean and tear-free bottom edge. Designed for high-efficiency cutting, as well as jointing and edge levelling in aluminium, plastics, and composites on CNC machining centres and overhead milling machines. The finishing geometry of the blades combined with polished chip flutes prevents the body from becoming clogged with chips. The ground shank, classified with H6 accuracy, eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003e3-Flute Design Z3 (Positive):\u003c\/strong\u003e Three cutting edges allow for a significant increase in feed rate while maintaining cutting fluidity and high-quality finish.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive Geometry (Upward Chip Removal):\u003c\/strong\u003e The right-hand spiral lifts chips upwards, effectively preventing fraying and tearing on the underside of the workpiece.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes:\u003c\/strong\u003e The mirror-like surface of the spiral reduces friction and prevents chips from welding to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Blade Geometry:\u003c\/strong\u003e Precise finishing of the cutting edges ensures a smooth surface after machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e The rigid and wear-resistant structure of the solid body guarantees long tool life and dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing Class G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations as well as jointing and edge levelling in aluminium, plastics, and composite materials on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444636819796,"sku":"SR01.08.035.080.08R","price":47.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SR01.08.035.080.08R_193.08.035.080.08RA-1.jpg?v=1793968439"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d3-i12-l60-s3-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D3 I12 L60 S3 RH Finishing positive","description":"\u003ch2\u003eSingle-edged spiral milling cutter VHM for PLEXI with upward chip removal – clean lower edge and efficient chip removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.03.012.060.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral milling cutter made from solid cemented carbide (VHM) with positive geometry (upward chip removal). The tool features a small angle of inclination of the helical profile, which effectively prevents lifting and vibrations of the machined material. It performs excellently in precise cutting, welding, and edge levelling of thin materials with a thickness from 1 mm to 8 mm on CNC machines and overhead spindle milling machines. The finishing geometry with one edge (Z1) combined with a polished chip groove prevents sticking and melting of the material. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring stability during machining.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated to thin materials (1–8 mm):\u003c\/strong\u003e Reduced spiral eliminates upward pulling forces, preventing the lifting of flexible sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 (positive) design:\u003c\/strong\u003e The single cutting edge allows for efficient chip removal, minimising friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip groove:\u003c\/strong\u003e The mirror finish of the spiral prevents sticking and re-welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry of the blade:\u003c\/strong\u003e Precisely sharpened edge guarantees perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations and edge welding and levelling in thin plastic sheets on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the processing of materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444636885332,"sku":"ST28.03.012.060.03R","price":15.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.03.012.060.03R_198.03.012.060.03RPS-108.jpg?v=1791281481"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d5-i15-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D5 I15 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Milling Cutter VHM for PLEXI with Upward Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.05.015.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, edge joining, and smoothing in plexiglass, plastics, and composites on CNC machines and overhead milling machines. The finishing geometry with a single blade (Z1) combined with a polished chip groove effectively prevents material sticking and melting. The right-hand helical design efficiently removes chips upwards, protecting the cutting area from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine’s drive system.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-Edged Design Z1 (Positive):\u003c\/strong\u003e The single cutting edge allows for rapid removal of large amounts of material, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Groove:\u003c\/strong\u003e The mirror-like surface of the spiral prevents sticking and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Edge Geometry:\u003c\/strong\u003e The precisely ground edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e The rigid construction of VHM reduces vibrations and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the chuck and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Balancing according to ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Range of Applications:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, edge joining, and smoothing in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, as well as composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444640391508,"sku":"ST01.05.015.060.06R","price":27.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.05.015.060.06R_198.05.015.060.06RP-110.jpg?v=1791281488"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-con-bajo-angulo-de-helice-vhm-z1-d4-i12-l60-s6-rh-acabado-positivo-1","title":"Spiral router bit for acrylic \u0026 plastics with low helix VHM Z1 D4 I12 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Milling Cutter VHM for PLEXI with Upwards Chip Removal – Clean Bottom Edge and Efficient Chip Evacuation\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST28.04.012.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upwards chip removal). The tool is equipped with a small helix angle, effectively preventing lifting and vibrations of the machined material. It is perfect for precise cutting, edging, and aligning the edges of thin materials with a thickness of 1 mm to 8 mm on CNC machines and overhead milling machines. The finishing geometry with one cutting edge (Z1) combined with a polished chip flute prevents adhesion and melting of the material. The ground shank with an accuracy class of H6 eliminates radial run-out, protecting the machine's drive system and ensuring machining stability.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated to thin materials (1–8 mm):\u003c\/strong\u003e The reduced spiral eliminates upward pulling forces, preventing lifting of flimsy sheets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSingle-edged Z1 design (positive):\u003c\/strong\u003e The single cutting edge allows for efficient chip removal, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flute:\u003c\/strong\u003e The mirror-like surface of the spiral prevents adhesion and secondary welding of chips with the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing edge geometry:\u003c\/strong\u003e The precisely sharpened edge ensures perfect edge quality without fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as edging and aligning the edges of thin plastic sheets on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for processing materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444643864916,"sku":"ST28.04.012.060.06R","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST28.04.012.060.06R_198.04.012.060.06RPS-107.jpg?v=1791281498"},{"product_id":"fresa-helicoidal-para-plexiglas-y-plasticos-vhm-z1-d6-i22-l60-s6-rh-acabado-positivo","title":"Spiral router bit for acrylic \u0026 plastics VHM Z1 D6 I22 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle-Edged Spiral Cutter VHM for PLEXI with Upward Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST01.06.022.060.06RE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single-edged spiral cutter made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, bonding, and edge finishing in plexiglass, plastics, and composites on CNC machines and overhead spindle milling machines. The finishing geometry with a single blade (Z1) combined with a polished chip flute effectively prevents material adherence and melting. The right-hand helical flute efficiently removes chips upwards, protecting the cutting zone from overheating and ensuring a smooth edge without the need for additional polishing. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSingle-Blade Design Z1 (Positive):\u003c\/strong\u003e A single cutting blade allows for quick removal of large amounts of material, minimizing friction and the risk of overheating the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flute:\u003c\/strong\u003e The mirror-like surface of the flute prevents adhesion and secondary welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Blade Geometry:\u003c\/strong\u003e Precisely ground edge ensures cleanliness and smoothness of the edge after cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMonolith of Sintered Carbide (VHM):\u003c\/strong\u003e The rigid VHM construction reduces vibrations and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Applications:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as bonding and edge finishing in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the processing of materials such as: PLEXI (acrylic), plastics, ALUCOBOND® panels, ALUCOBOND® A2, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444644323668,"sku":"ST01.06.022.060.06RE","price":27.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST01.06.022.060.06RE_ST01.06.022.060.06RE-112.jpg?v=1791281500"},{"product_id":"fresa-helicoidal-super-finish-para-plexiglas-y-plasticos-vhm-z1-d6-i22-l60-s6-rh-acabado-positivo","title":"Super Finish spiral router bit for acrylic \u0026 plastics VHM Z1 D6 I22 L60 S6 RH Finishing positive","description":"\u003ch2\u003eSingle Blade Spiral Mill VHM for PLEXI with Upward Chip Removal Super Finish – Mirror Quality Edges and Efficient Chip Removal\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eST36.06.022.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial single blade spiral mill made from solid carbide (VHM) with positive geometry (upward chip removal). Designed for precise cutting, edging, and alignment of edges in plexiglass, plastics, and composites on CNC machines and overhead spindle milling machines. The tool from the Super Finish line has a special blade geometry and highly polished flute, allowing for a mirror finish on edges without the need for additional polishing. The right-hand spiral efficiently removes chips upward, preventing melting and sticking of the material in the cutting area. The ground shank with an accuracy class of H6 eliminates radial runout, protecting the machine's drive system and ensuring stable operation.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSpecial Super Finish Geometry (Z1):\u003c\/strong\u003e Unique sharpening of the single blade guarantees a perfectly smooth, transparent, and mirror-like edge immediately after machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHighly Polished Flute:\u003c\/strong\u003e The mirror surface of the spiral prevents chips from welding to the body and ensures immediate chip evacuation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive Geometry with Upward Chip Removal:\u003c\/strong\u003e The right-hand spiral effectively removes chips from the cutting zone, protecting the material from overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e Rigid and wear-resistant construction eliminates vibrations, ensuring dimensional repeatability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Surface Roughness of the Shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the chuck and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing Class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures stable and quiet operation at maximum rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations and edging and aligning edges in plastics on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: PLEXI (acrylic), plastics, ALUCOBOND® sheets, ALUCOBOND® A2, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444644618580,"sku":"ST36.06.022.060.06R","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/ST36.06.022.060.06R_ST36.06.022.060.06R-107.jpg?v=1791281502"},{"product_id":"fresa-helicoidal-para-aluminio-y-plasticos-vhm-z2-d10-i22-l60-s10-rh-acabado-positivo","title":"Spiral router bit for aluminum \u0026 plastics VHM Z2 D10 I22 L60 S10 RH Finishing positive","description":"\u003ch2\u003eTwo-flute VHM spiral end mill for aluminium and plastics with upward chip removal – clean bottom edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSQ01.10.022.060.10R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute spiral end mill made from solid carbide (VHM) with positive geometry (upward chip removal). The arrangement of two cutting edges (Z2) provides greater tool rigidity, reduces vibration, and allows for higher feed rates while maintaining stability. The right-hand spiral effectively lifts chips upwards, ensuring cleanliness and preventing tear-outs on the bottom edge of the workpiece. Designed for precision cutting, edge jointing, and trimming in aluminium, plastics, and composite materials on CNC machining centres and conventional milling machines. The finishing geometry combined with polished chip grooves prevents chip build-up on the tool body. The ground shank in accuracy class H6 eliminates radial run-out, protecting the machine spindle.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute design Z2 (positive):\u003c\/strong\u003e Two cutting edges enhance the rigidity of the mill and enable increased feed speeds with very smooth guidance in the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePositive geometry (upward chip removal):\u003c\/strong\u003e The right-hand spiral directs chips upwards, preventing fraying and tear-outs on the underside of the workpiece.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e The mirror-like surface of the spiral reduces friction, effectively preventing sticking and welding of chips to the tool body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e Precisely sharpened cutting edges ensure a smooth finish on the machined surfaces.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid and wear-resistant structure of the solid carbide reduces vibration and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards guarantees vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations as well as edge jointing and trimming in aluminium, plastics, and composites on CNC machining centres.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: aluminium, plastics, and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444645405012,"sku":"SQ01.10.022.060.10R","price":35.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SQ01.10.022.060.10R_SQ01.10.022.060.10R-103.jpg?v=1791281505"},{"product_id":"fresa-para-composites-desbaste-d4-i22-l60-s6-rh","title":"Router bit for composites Roughing D4 I22 L60 S6 RH","description":"\u003ch2\u003eMulti-edge VHM spiral milling cutter composite roughing tool – rosette head (CNR) and delamination-free machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eCNR.04.022.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial roughing cutter made of solid carbide (VHM) with a rosette-type head (CNR) and neutral cutting edge geometry (chip ejection to the sides). The front design facilitates axial entry into the material along the Z-axis, reducing cutting resistance and eliminating the risk of damaging the structure upon entry. The multi-edge cutting system crushes the material, preventing delamination of composites and pulling out glass and carbon fibers. The neutral cutting direction does not generate axial forces (either pressing or lifting), ensuring a high standard of edge finish on both sides of the plate. Dedicated for efficient slicing, grooving, and jointing on CNC machining centres. The ground shank in H6 class protects the spindle from vibrations and prevents radial runout.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eRosette head geometry (CNR):\u003c\/strong\u003e The dedicated front design lowers resistance during axial lowering, allowing for stable entry into the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMulti-edge roughing system:\u003c\/strong\u003e Dense teeth finely crush chips, preventing separation of layers and fraying of edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNeutral chip ejection to the sides:\u003c\/strong\u003e The absence of pressure and lifting of the workpiece guarantees stable cutting and a clean profile on both sides.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e High hardness and wear resistance ensure longer tool life when machining abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e Precisely ground shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables safe and vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for rough cutting operations, axial entry into the material along the Z-axis, slicing, and jointing in composites and plywood on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: carbon fibre reinforced plastics (CFRP), glass fibre reinforced plastics (GFRP), CORIAN® composite boards, HPL laminates, and plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444670538068,"sku":"CNR.04.022.060.06R","price":18.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/CNR.04.022.060.06R_CNR.04.022.060.06R-109_475fbeda-bce1-41bc-9858-7dc21859c2b6.jpg?v=1793968630"},{"product_id":"fresa-para-composites-desbaste-d8-i30-l80-s8-rh","title":"Router bit for composites Roughing D8 I30 L80 S8 RH","description":"\u003ch2\u003eMulti-edge VHM spiral cutter for composites – rosette face (CNR) and machining without delamination\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eCNR.08.030.080.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial roughing cutter made from solid cemented carbide (VHM) with a rosette-type face (CNR) and neutral cutting edge geometry (chip removal to the sides). The front construction facilitates axial entry into the material along the Z-axis, reducing cutting resistance and eliminating the risk of damage to the structure upon entry. The multi-edge cutting system breaks the material, preventing the delamination of composites and the pulling out of glass and carbon fibres. The neutral cutting direction does not generate axial forces (either pushing or lifting), ensuring a high edge finishing standard on both sides of the plate. Designed for efficient cutting, grooving, and bonding on CNC machining centres. The ground shank in class H6 protects the spindle from vibrations and prevents radial runout.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eRosette cutting geometry (CNR):\u003c\/strong\u003e The dedicated front geometry reduces resistance during axial plunging, enabling stable entry into the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMulti-edge roughing system:\u003c\/strong\u003e Dense tooth configuration finely crushes chips, preventing the layers from peeling apart and edge fraying.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNeutral chip removal to the sides:\u003c\/strong\u003e The absence of pressure or lifting of the workpiece ensures stable cutting and a clean profile on both sides.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid cemented carbide (VHM):\u003c\/strong\u003e High hardness and abrasion resistance provide a longer lifespan when working with abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Precisely ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables safe and vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for rough cutting operations, axial entry into the material, cutting, and bonding in composites and plywood on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: carbon fibre reinforced plastics (CFRP), glass fibre (GFRP), CORIAN® composite boards, HPL laminates, and plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444671291732,"sku":"CNR.08.030.080.08R","price":51.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/CNR.08.030.080.08R_CNR.08.030.080.08R-112.jpg?v=1791281611"},{"product_id":"fresa-para-composites-acabado-d10-i35-l80-s10-rh-2","title":"Router bit for composites Finishing D10 I35 L80 S10 RH","description":"\u003ch2\u003eMulti-edge spiral cutter VHM for composites – clean cutting without delaminating the material\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eCPS.10.035.080.10R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial multi-edge cutter made from solid carbide (VHM) designed for efficient machining of demanding composite materials. The special cutting edge arrangement protects the material from delamination and the pulling of glass and carbon fibres during machining. The right-hand screw line (positive geometry) efficiently lifts the chips upwards, preventing accumulation in the cutting zone and protecting the lower edge of the workpiece. The tool works well for precise cutting, shaping, and edge levelling on CNC machining centres and overhead milling machines. The precisely ground shank in the H6 accuracy class eliminates radial runout, protecting the machine's drive system from premature wear.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGeometry for composite materials:\u003c\/strong\u003e The multi-edge blade arrangement cleanly cuts through the material structure, preventing fraying and peeling of layers at the edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eChip evacuation upwards (positive):\u003c\/strong\u003e The right-hand chip channel effectively lifts dust and chips, protecting the underside of the workpiece from scratching.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh hardness carbide (VHM):\u003c\/strong\u003e The solid construction ensures wear resistance when working with highly abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the collet and secures the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Balancing according to ISO standards enables safe and vibration-free operation at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and range of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for formatting, cutting, and edge levelling operations on fibrous composites on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: carbon fibre reinforced plastics (CFRP), glass fibre reinforced plastics (GFRP), CORIAN® composite boards, and HPL laminates.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444671881556,"sku":"CPS.10.035.080.10R","price":51.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/CPS.10.035.080.10R_CPS.10.035.080.10R-104.jpg?v=1791281613"},{"product_id":"fresa-para-composites-acabado-d4-i15-l60-s4-rh-2","title":"Router bit for composites Finishing D4 I15 L60 S4 RH","description":"\u003ch2\u003eMultifunctional straight VHM milling cutter for composites – neutral chip ejection and protection against delamination\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eCSS.04.015.060.04R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial multi-edge milling cutter made from solid tungsten carbide (VHM) with a straightforward blade geometry (neutral chip ejection to the sides). Designed for precise machining of fibrous composites, it eliminates the risk of delamination of the structure and the pulling of glass and carbon fibres. The arrangement of straight cutting edges does not generate vertical forces (neither pressing nor lifting), ensuring a smooth finish and absence of tearing on both the upper and lower surfaces of the plate. The tool is effective for cutting, welding, and grooving on CNC machining centres and overhead milling machines. The ground shank in H6 class protects the spindle from vibrations and prevents radial runout.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eMultifunctional geometry for composites:\u003c\/strong\u003e The multi-edge cutting arrangement precisely shears the material, preventing layer separation and fraying of the fibres.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStraight geometry (sideward chip ejection):\u003c\/strong\u003e The neutral cutting direction eliminates pressure and lifting of the workpiece, providing clean edges on both sides.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid tungsten carbide (VHM):\u003c\/strong\u003e Wear-resistant material structure ensures a long service life when machining abrasive materials.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank protects the spindle taper and prevents tool movement in the holder.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Balancing according to ISO standards ensures stable and vibration-free operation at very high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, welding, and grooving operations in composite materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: fibre-reinforced plastics (CFRP), glass fibre (GFRP), composite boards CORIAN®, and HPL laminates.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444672110932,"sku":"CSS.04.015.060.04R","price":13.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/CSS.04.015.060.04R_CSS.04.015.060.04R-109_51cbd4a9-1d47-4192-a6c2-f4830a3f046a.jpg?v=1793968633"},{"product_id":"fresa-helicoidal-acabado-vhm-z1-d3-i12-l50-s3-rh-positivo","title":"Spiral router bit Finishing VHM Z1 D3 I12 L50 S3 RH positive ","description":"\u003ch2\u003eVHM Spiral Milling Cutter Single Edge \u003cstrong\u003e3x12\u003c\/strong\u003e\u0026nbsp;from the \u003cstrong\u003eSA01\u003c\/strong\u003e series – perfect edge quality and high processing efficiency\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSA01.03.012.050.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eA high-performance spiral milling cutter made from a solid sintered tungsten carbide (VHM) monolith from the \u003cstrong\u003eSA01\u003c\/strong\u003e line, designed for tasks related to precise cutting, formatting, and finishing on overhead milling machines and CNC centres. The tool features a uniform spiral geometry in a \u003cb\u003eZ1\u003c\/b\u003e configuration with a positive angle, which enforces efficient chip removal upwards. The use of high-quality micro-grain carbide ensures high resistance to abrasive wear and significantly extends the cutting edge's lifespan. The ground shaft with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and guaranteeing an excellent finishing standard of the work material.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry 1 (upward chip removal):\u003c\/strong\u003e The polished chip channel combined with a single cutting edge facilitates free evacuation of the material upwards while maintaining minimal cutting resistance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium (VHM) carbide monolith:\u003c\/strong\u003e The rigid, monolithic construction prevents deformation of the cutter during operation under high force, allowing for the maintenance of narrow dimensional tolerances.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying PVD coating:\u003c\/strong\u003e The option to apply protective layers (including TiSiN or PLATINIUM) allows for several times the lifespan of the edge, drastically reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shaft surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wearing the taper in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds (18,000 – 24,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling, and edge finishing.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: soft and hard wood, raw MDF board, plywood, and raw particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444672340308,"sku":"SA01.03.012.050.03R","price":10.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SA01.03.012.050.03R_SA01.03.012.050.03R-108.jpg?v=1791281619"},{"product_id":"fresa-helicoidal-acabado-vhm-z2-d6-i22-l60-s6-rh-positivo","title":"Spiral router bit Finishing VHM Z2 D6 I22 L60 S6 RH positive ","description":"\u003ch2\u003e2-flute solid carbide spiral end mill \u003cstrong\u003e6x22\u003c\/strong\u003e\u0026nbsp;from the \u003cstrong\u003eSB01\u003c\/strong\u003e series – perfect edge quality and high machining performance\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSB01.06.022.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSB01\u003c\/strong\u003e line, designed for precise cutting, formatting, and finishing tasks on spindle milling machines and CNC centres. The tool features a 2-flute spiral geometry in positive configuration \u003cstrong\u003e2\u003c\/strong\u003e that promotes effective chip removal upwards. The use of high-quality micro-grain carbide ensures high wear resistance and significantly extends the cutting edge's durability. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent finish standard on the machined material.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry Z2 (upward chip removal):\u003c\/strong\u003e Two cutting edges ensure high cutting efficiency, ideal edge finish standards, and effective upward chip removal.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium solid carbide (VHM):\u003c\/strong\u003e The rigid, monolithic construction prevents deformation of the end mill during operation under high force, allowing for narrow dimensional tolerances to be maintained.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying PVD coating:\u003c\/strong\u003e The option to apply protective coatings (including TiSiN or PLATINIUM) allows for multiple extensions of the edge life, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the end mill from rotating in the holder and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at the highest speeds (up to 18,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, and finishing edge operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: softwood and hardwood, raw MDF board, plywood, and raw particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444672602452,"sku":"SB01.06.022.060.06R","price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SB01.06.022.060.06R_191.06.022.060.06R-108.jpg?v=1791281621"},{"product_id":"fresa-helicoidal-acabado-vhm-z2-d8-i22-l70-s8-rh-positivo","title":"Spiral router bit Finishing VHM Z2 D8 I22 L70 S8 RH positive ","description":"\u003ch2\u003eTwo-flute VHM spiral end mill \u003cstrong\u003e8x22\u003c\/strong\u003e\u0026nbsp;from the \u003cstrong\u003eSB01\u003c\/strong\u003e series – perfect edge quality and high machining efficiency\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSB01.08.022.070.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSB01\u003c\/strong\u003e line, intended for tasks involving precise cutting, formatting, and finishing on router mills and CNC centres. The tool features a two-flute spiral geometry in a \u003cstrong\u003e2\u003c\/strong\u003e configuration with a positive layout, which ensures efficient chip removal upwards. The use of high-quality micro-grain carbide provides high resistance to abrasive wear and significantly extends the cutting edge's durability. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and guaranteeing an excellent finish standard on the machined material.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2 finishing geometry (upward chip removal):\u003c\/strong\u003e Two cutting edges guarantee high cutting efficiency, an ideal edge finishing standard, and efficient chip removal upwards.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e Rigid, monolithic construction prevents deformation of the mill under high force, allowing for narrow dimensional tolerances to be maintained.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying PVD coating:\u003c\/strong\u003e The option of applying protective layers (including TiSiN or PLATINIUM) allows for several times extension of edge life, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the mill from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at the highest speeds (up to 18,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and finishing edge machining.\u003c\/p\u003e\u003cp\u003eIt works excellently for machining materials such as soft and hard wood, raw MDF board, plywood, and raw particleboard.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444673126740,"sku":"SB01.08.022.070.08R","price":24.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SB01.08.022.070.08R_191.08.022.070.08R-104.jpg?v=1791281623"},{"product_id":"fresa-helicoidal-acabado-vhm-z2-d12-i52-l100-s12-rh-positivo","title":"Spiral router bit Finishing VHM Z2 D12 I52 L100 S12 RH positive ","description":"\u003ch2\u003eVHM spiral end mill double-edged \u003cstrong\u003e12x52\u003c\/strong\u003e\u0026nbsp;from the \u003cstrong\u003eSB01\u003c\/strong\u003e series – perfect edge quality and high machining efficiency\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSB01.12.052.100.12R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from a solid sintered carbide monolith (VHM) from the \u003cstrong\u003eSB01\u003c\/strong\u003e line, intended for tasks involving precise cutting, formatting, and finishing on overhead spindle mills and CNC centres. The tool employs a double-edged spiral geometry in \u003cstrong\u003e2\u003c\/strong\u003e positive layout configuration, which forces efficient chip removal upwards. The use of high-quality micrograin carbide ensures high resistance to abrasive wear and significantly extends the cutting edge's lifespan. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent finish standard of the machined material.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2 finishing geometry (upward chip removal):\u003c\/strong\u003e Two cutting edges guarantee high cutting efficiency, ideal edge finish standard, and efficient chip removal upwards.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMonolith of Premium sintered carbide (VHM):\u003c\/strong\u003e Rigid, monolithic construction prevents deformation of the mill under high force, allowing for narrow dimensional tolerances to be maintained.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying a PVD coating:\u003c\/strong\u003e The option to apply protective layers (including TiSiN or PLATINIUM) allows for multiple extensions of edge life, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the mill from rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standards:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and minimises vibration generated at high speeds (up to 18,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, contour milling, and finishing edge processing.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: soft and hardwood, raw MDF board, plywood, and raw chipboard.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444673454420,"sku":"SB01.12.052.100.12R","price":74.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SB01.12.052.100.12R_191.12.052.100.12R-106.jpg?v=1791281626"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d8-i32-l80-s8-rh-positivo","title":"Spiral router bit Finishing VHM Z3 D8 I32 L80 S8 RH positive ","description":"\u003ch2\u003eThree-flute VHM spiral end mill \u003cstrong\u003e8x32 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC01\u003c\/strong\u003e series – perfect edge quality and high machining performance\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC01.08.032.080.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSC01\u003c\/strong\u003e line, intended for tasks related to precise cutting, shaping and finishing on overhead milling machines and CNC centres. The tool features a three-flute spiral geometry in a \u003cstrong\u003eZ3\u003c\/strong\u003e\u0026nbsp;positive configuration, which forces effective chip evacuation upwards. The use of high-quality micro-grain carbide ensures high resistance to abrasive wear and significantly extends the cutting edge's tool life. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e minimises radial runout, protecting the spindle bearing system and guaranteeing an excellent finish standard for the machined material.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry\u0026nbsp;\u003cstrong\u003eZ3\u003c\/strong\u003e\u0026nbsp;(upward chip removal):\u003c\/strong\u003e Three cutting edges ensure very high cutting efficiency, allow operation at higher feed rates, provide an ideal finish standard for edges and efficient chip removal upwards.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e Rigid, monolithic construction prevents deformation of the mill during high-force work, allowing for tight dimensional tolerances.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of using PVD coating:\u003c\/strong\u003e The option to apply protective layers (including TiSiN or PLATINIUM) allows for multiple extensions of the edge life, reduces friction and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the mill from spinning in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (in accordance with ISO\/EN) reduces noise and vibrations generated at high speeds (up to 18,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling and finishing of edges.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: soft and hard wood, raw MDF board, plywood and raw particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444673978708,"sku":"SC01.08.032.080.08R","price":30.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC01.08.032.080.08R_SC01.08.032.080.08R-105.jpg?v=1791281629"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d10-i32-l80-s10-rh-positivo","title":"Spiral router bit Finishing VHM Z3 D10 I32 L80 S10 RH positive ","description":"\u003ch2\u003eThree-flute VHM spiral cutter \u003cstrong\u003e10x32 mm\u003c\/strong\u003e from the series \u003cstrong\u003eSC01\u003c\/strong\u003e – perfect edge quality and high machining efficiency\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC01.10.032.080.10R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral cutter made from a solid sintered carbide (VHM) monolith from the \u003cstrong\u003eSC01\u003c\/strong\u003e line, designed for tasks involving precise cutting, formatting, and finishing on overhead spindle milling machines and CNC centres. The tool features a three-flute spiral geometry in a \u003cstrong\u003eZ3\u003c\/strong\u003e\u0026nbsp;configuration with a positive layout, which enforces efficient chip removal upwards. The use of high-quality micrograin carbide ensures high abrasion resistance and significantly extends the cutting edge durability. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent finish standard on the machined material.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry \u003cstrong\u003eZ3\u003c\/strong\u003e\u0026nbsp;(upward chip removal):\u003c\/strong\u003e Three cutting edges guarantee very high cutting efficiency, allow for operation at higher feed rates, ensure an ideal edge finish standard and enable efficient upward chip removal.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e The rigid, monolithic construction prevents deformation of the cutter under heavy loads, allowing for narrow dimensional tolerances to be maintained.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying a PVD coating:\u003c\/strong\u003e The option to apply protective layers (including TiSiN or PLATINIUM) allows for several times the lifespan of the edge, reduces friction and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standards:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds (up to 18,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and edge finishing.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: soft and hard wood, raw MDF board, plywood, and raw chipboard.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444674208084,"sku":"SC01.10.032.080.10R","price":45.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC01.10.032.080.10R_193.10.032.080.10R-104.jpg?v=1791281632"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d10-i52-l100-s10-rh-positivo","title":"Spiral router bit Finishing VHM Z3 D10 I52 L100 S10 RH positive ","description":"\u003ch2\u003eVHM three-flute spiral end mill \u003cstrong\u003e10x52 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC01\u003c\/strong\u003e series – perfect edge quality and high machining efficiency\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC01.10.052.100.10R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from a solid sintered carbide (VHM) monolith from the \u003cstrong\u003eSC01\u003c\/strong\u003e line, designed for tasks involving precise cutting, shaping, and finishing on overhead spindle milling machines and CNC centres. The tool features a three-flute spiral geometry in a \u003cstrong\u003eZ3\u003c\/strong\u003e\u0026nbsp;positive setup, which forces efficient chip removal upwards. The use of high-grade micrograin carbide ensures high resistance to abrasive wear and significantly prolongs the tool’s cutting edge lifespan. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent standard of finish on the machined material.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry\u0026nbsp;\u003cstrong\u003eZ3\u003c\/strong\u003e\u0026nbsp;(upward chip removal):\u003c\/strong\u003e Three cutting edges guarantee very high cutting efficiency, allow for operation at higher feed speeds, ensure an ideal edge finish standard, and enable efficient upward chip removal.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e Rigid, monolithic construction prevents deformation of the cutter under high force, allowing for tight dimensional tolerances to be maintained.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying a PVD coating:\u003c\/strong\u003e The option to apply protective layers (including TiSiN or PLATINIUM) enables multiple extensions of the cutting edge lifespan, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a high class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds (up to 18,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and usage range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, and edge finishing operations.\u003c\/p\u003e\u003cp\u003eIt works excellently in machining materials such as: soft and hard wood, raw MDF board, plywood, and raw particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444674240852,"sku":"SC01.10.052.100.10R","price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC01.10.052.100.10R_SC01.10.052.100.10R-102.jpg?v=1791281634"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d18-i55-l110-s18-rh-positivo","title":"Spiral router bit Finishing VHM Z3 D18 I55 L110 S18 RH positive ","description":"\u003ch2\u003eVHM three-flute spiral end mill \u003cstrong\u003e18x55 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC01\u003c\/strong\u003e series – perfect edge quality and high machining performance\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC01.18.055.110.18R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis high-performance spiral end mill is made from a solid sintered carbide (VHM) monolith from the \u003cstrong\u003eSC01\u003c\/strong\u003e line, intended for tasks related to precise cutting, shaping, and finishing on overhead spindle milling machines and CNC centres. The tool features a three-flute spiral geometry in a \u003cstrong\u003eZ3\u003c\/strong\u003e configuration with a positive layout, which compels efficient chip removal upwards. The use of high-grade micro-grain carbide ensures high wear resistance and significantly extends the cutting edge's lifespan. A ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial run-out, protecting the spindle bearing assembly and guaranteeing an excellent finish standard for the machined material.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFinishing geometry \u003cstrong\u003eZ3\u003c\/strong\u003e (upward chip removal):\u003c\/strong\u003e Three cutting edges ensure very high cutting efficiency, allow for operation at higher feed speeds, provide an ideal edge finishing standard, and facilitate the efficient upward removal of chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e The rigid, monolithic structure prevents deformation of the end mill during high-force operations, allowing for tight dimensional tolerances to be maintained.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying PVD coating:\u003c\/strong\u003e The option to apply protective layers (including TiSiN or PLATINIUM) enables multiple extensions of the edge's lifespan, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the end mill from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimizes noise and reduces vibrations generated at the highest speeds (up to 18,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and finishing edge machining.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: soft and hard wood, raw MDF board, plywood, and raw chipboard.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444674634068,"sku":"SC01.18.055.110.18R","price":163.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC01.18.055.110.18R_193.18.055.110.18R-1.jpg?v=1791281637"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d16-i52-l100-s16-rh-positivo","title":"Spiral router bit Finishing VHM Z3 D16 I52 L100 S16 RH positive ","description":"\u003ch2\u003eThree-flute spiral end mill VHM with chip breaker \u003cstrong\u003e16x52 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC03\u003c\/strong\u003e series – maximum efficiency and high standard machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC03.16.052.100.16R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSC03\u003c\/strong\u003e line, intended for efficient format machining, cutting, and rough and finish operations on overhead spindle milling machines and CNC centres. The tool features a three-flute spiral geometry in a \u003cstrong\u003eZ3R\u003c\/strong\u003e configuration with a positive layout, which guarantees immediate removal of dust and chips upwards, maintaining perfect cleanliness of the lower edge. The applied chip breaker significantly reduces mechanical loads on the system and crushes the material, allowing work at increased feed rates without loss of stability. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring impeccable detail quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ3R chip breaker geometry (upward discharge):\u003c\/strong\u003e The arrangement of three cutting edges with a chip breaker reduces work resistance, facilitates the removal of crushed material, and allows for fast feed while achieving an ideal finish on the lower edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e The rigid, monolithic structure prevents deformation of the mill during work under high force, allowing for precision cutting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying PVD coating:\u003c\/strong\u003e The option of applying protective layers (including TiSiN or PLATINIUM) allows for multiple extensions of edge life, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shaft surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, grooving, and medium rough and finishing machining.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: soft and hard wood, raw MDF board, plywood, and raw chipboard.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444674765140,"sku":"SC03.16.052.100.16R","price":142.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC03.16.052.100.16R_SC03.16.052.100.15R-104.jpg?v=1791281640"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d16-i72-l130-s16-rh-positivo","title":"Spiral router bit Finishing VHM Z3 D16 I72 L130 S16 RH positive ","description":"\u003ch2\u003eThree-flute spiral end mill VHM with chip breaker \u003cstrong\u003e16x72 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC03\u003c\/strong\u003e series – maximum efficiency and high machining standard\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC03.16.072.130.16R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSC03\u003c\/strong\u003e line, designed for efficient profiling, cutting, and finishing-roughing operations on overhead spindle milling machines and CNC centres. The tool employs a three-flute spiral geometry in the \u003cstrong\u003eZ3R\u003c\/strong\u003e configuration with a positive setup, ensuring immediate upward chip and dust evacuation while maintaining perfect cleanliness of the lower edge. The implemented chip breaker significantly reduces mechanical loads on the system and crushes the material, enabling work at increased feed rates without loss of stability. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring flawless detail quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGeometry with Z3R chip breaker (upward discharge):\u003c\/strong\u003e The arrangement of three cutting edges with a chip breaker reduces work resistance, streamlines the discharge of crushed material, and allows for fast feeding with ideal finishing of the lower edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e The rigid, monolithic construction prevents deformation of the mill during operation under high force, allowing for the maintenance of cutting precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying PVD coating:\u003c\/strong\u003e The option of applying protective layers (including TiSiN or PLATINIUM) allows for multiple extensions of edge life, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimizes noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, notching, and medium roughing and finishing machining.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: soft and hardwood, raw MDF board, plywood, and raw particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444675289428,"sku":"SC03.16.072.130.16R","price":160.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC03.16.072.130.16R_193.16.072.130.16RN-101.jpg?v=1793968203"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d20-i60-l120-s20-rh-positivo","title":"Spiral router bit Finishing VHM Z3 D20 I60 L120 S20 RH positive ","description":"\u003ch2\u003eThree-flute VHM spiral end mill with chip breaker \u003cstrong\u003e20x60 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC03\u003c\/strong\u003e series – maximum efficiency and high processing standard\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC03.20.060.120.20R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSC03\u003c\/strong\u003e line, intended for efficient formatting, cutting, and roughing-finishing operations on overhead milling machines and CNC centres. The tool features a three-flute spiral geometry in a \u003cstrong\u003eZ3R\u003c\/strong\u003e configuration with a positive layout, which ensures immediate removal of dust and chips upwards while maintaining perfect cleanliness of the lower edge. The chip breaker significantly reduces the mechanical loads on the system and crushes the chips, allowing work at an increased feed rate without loss of stability. The ground shank in \u003cstrong\u003eH6\u003c\/strong\u003e tolerance class eliminates radial runout, protecting the spindle bearing system and ensuring impeccable detail quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ3R chip breaker geometry (upward discharge):\u003c\/strong\u003e The arrangement of three cutting edges with the chip breaker reduces working resistance, improves the discharge of crushed material, and enables quick feed at an ideal finish of the lower edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e The rigid, monolithic construction prevents deformation of the mill during operation under high forces, allowing for maintained cutting precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying PVD coating:\u003c\/strong\u003e The option of applying protective layers (e.g., TiSiN or PLATINIUM) allows for multiple extensions of edge life, reduces friction and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the mill from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in an ultra-tight \u003cstrong\u003eG2.5\u003c\/strong\u003e class (in accordance with ISO\/EN) reduces noise and vibration generated at the highest speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, grooving, and medium roughing and finishing operations.\u003c\/p\u003e\u003cp\u003eIt works excellently in machining materials such as: soft and hard wood, raw MDF board, plywood, and raw particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444675682644,"sku":"SC03.20.060.120.20R","price":227.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC03.20.060.120.20R_193.20.060.120.20Rn-110.jpg?v=1793968207"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d20-i102-l165-s20-rh-positivo","title":"Spiral router bit Finishing VHM Z3 D20 I102 L165 S20 RH positive ","description":"\u003ch2\u003eThree-flute VHM spiral end mill with chip breaker \u003cstrong\u003e20x102 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC03\u003c\/strong\u003e series – maximum efficiency and high processing standard\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC03.20.102.165.20R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from a solid monolith of sintered carbide (VHM) from the \u003cstrong\u003eSC03\u003c\/strong\u003e line, designed for efficient formatting, cutting, and roughing-finishing operations on overhead spindle milling machines and CNC centres. The tool uses a three-flute spiral geometry in the \u003cstrong\u003eZ3R\u003c\/strong\u003e positive configuration, which guarantees immediate removal of dust and chips upwards and maintains perfect cleanliness of the bottom edge. The applied chip breaker significantly reduces mechanical load on the system and crushes the output, allowing for operation with an increased feed rate without loss of stability. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring impeccable detail quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eChip breaker geometry Z3R (upward ejection):\u003c\/strong\u003e The arrangement of three cutting edges with a chip breaker reduces working resistance, enhances the ejection of crushed output, and allows for fast feed with ideal finishing of the bottom edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMonolith of Premium sintered carbide (VHM):\u003c\/strong\u003e The rigid, monolithic structure prevents deformation of the mill during heavy-duty work, allowing for precise cutting performance.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of PVD coating application:\u003c\/strong\u003e The option to apply protective layers (including TiSiN or PLATINIUM) allows for multiple extensions of edge life, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the mill from rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, grooving, as well as medium roughing and finishing machining.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: soft and hard wood, raw MDF board, plywood, and raw chipboard.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444675977556,"sku":"SC03.20.102.165.20R","price":290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC03.20.102.165.20R_SC03.20.102.165.20R-105.jpg?v=1793968207"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d12-i35-l80-s12-rh-positivo-tisin","title":"Spiral router bit Finishing VHM Z3 D12 I35 L80 S12 RH positive TiSiN","description":"\u003ch2\u003eThree-flute spiral end mill made of solid carbide with chip breaker and TiSiN coating \u003cstrong\u003e12x35 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC23\u003c\/strong\u003e series – maximum durability and machining efficiency\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC23.12.035.080.12TR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSC23\u003c\/strong\u003e range, designed for shaping, cutting, and rough and finishing operations on overhead spindle milling machines and CNC centres. The tool uses a three-flute spiral geometry in a \u003cstrong\u003eZ3R\u003c\/strong\u003e positive configuration, ensuring instant removal of dust and chips upwards and maintaining perfect cleanliness of the lower edge. The applied TiSiN protective coating significantly reduces friction, prevents overheating of the cutting edges, and greatly extends the tool's operational life. A ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and ensuring impeccable quality of the detail.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eAdvanced TiSiN protective coating:\u003c\/strong\u003e PVD layer with microstructural hardness of 3570 HV 0.05, thickness of 1–4 µm, and low friction coefficient (0.5) shows resistance to thermal loads, reduces resistance, and significantly extends tool life.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGeometry with Z3R chip breaker (upward ejection):\u003c\/strong\u003e The arrangement of three cutting edges with a chip breaker reduces work resistance, facilitates the ejection of crushed material, and allows for fast feed with perfect finishing of the lower edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium solid carbide (VHM) monolith:\u003c\/strong\u003e The rigid monolithic construction limits tool deflection under load and ensures high dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the mill from rotation in the holder and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and area of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, groove milling, and roughing and finishing machining.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as soft and hard wood, raw MDF board, plywood, and raw chipboard.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444676239700,"sku":"SC23.12.035.080.12TR","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC23.12.035.080.12TR_SC23.12.035.080.12TR-106.jpg?v=1793973067"},{"product_id":"fresa-helicoidal-desbaste-vhm-z3-d16-i55-l110-s16-rh-positivo-tisin","title":"Spiral router bit Roughing VHM Z3 D16 I55 L110 S16 RH positive TiSiN","description":"\u003ch2\u003eVHM three-flute spiral end mill with chip breaker and TiSiN coating \u003cstrong\u003e16x55 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC23\u003c\/strong\u003e series – maximum lifespan and machining efficiency\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC23.16.055.110.16TR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSC23\u003c\/strong\u003e line, designed for shaping, cutting, and roughing-finishing operations on overhead spindle milling machines and CNC centres. The tool features a three-flute spiral geometry in a \u003cstrong\u003eZ3R\u003c\/strong\u003e configuration with a positive layout, guaranteeing immediate removal of dust and chips upwards and maintaining perfect cleanliness of the lower edge. The applied TiSiN protective coating significantly reduces friction, prevents overheating of the cutting edges, and greatly extends the tool's lifespan. The ground shank with tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring impeccable quality of the detail.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eAdvanced TiSiN protective coating:\u003c\/strong\u003e PVD layer with microstructural hardness of 3570 HV 0.05, thickness of 1–4 µm, and low friction coefficient (0.5) demonstrates resistance to thermal loads, reduces drag, and significantly extends tool life.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eChip breaker geometry Z3R (upward ejection):\u003c\/strong\u003e The arrangement of three cutting edges with chip breaker reduces working resistance, facilitates ejection of fragmented material, and allows for fast feed with ideal finishing of the lower edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e Rigid monolithic design limits tool deflection under load and ensures high dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the end mill from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, mortising, as well as medium roughing and finishing operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: soft and hard wood, raw MDF board, plywood, and raw particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444676305236,"sku":"SC23.16.055.110.16TR","price":135.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC23.16.055.110.16TR_SC23.16.055.110.16TR-105.jpg?v=1793968213"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d20-i60-l120-s20-rh-positivo-tisin","title":"Spiral router bit Finishing VHM Z3 D20 I60 L120 S20 RH positive TiSiN","description":"\u003ch2\u003eThree-bladed VHM spiral end mill with chip breaker and TiSiN coating \u003cstrong\u003e20x60 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC23\u003c\/strong\u003e series – maximum lifespan and processing efficiency\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC23.20.060.120.20TR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid sintered carbide (VHM) from the \u003cstrong\u003eSC23\u003c\/strong\u003e line, designed for formatting, cutting, and roughing-finishing operations on overhead spindle milling machines and CNC centres. The tool features a three-blade spiral geometry in a \u003cstrong\u003eZ3R\u003c\/strong\u003e positive configuration, which ensures immediate upward dust and chip removal and maintains perfect cleanliness of the lower edge. The applied TiSiN protective coating significantly reduces friction, prevents overheating of the cutting edges, and greatly extends the tool's working time. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle's bearing system and ensuring flawless detail quality.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eAdvanced TiSiN protective coating:\u003c\/strong\u003e The PVD layer with microstructural hardness of 3570 HV 0.05, thickness of 1–4 µm, and low friction coefficient (0.5) displays resistance to thermal loads, reduces resistance, and significantly extends tool life.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eZ3R chip breaker geometry (upward discharge):\u003c\/strong\u003e The arrangement of three cutting edges with a chip breaker lowers operating resistance, enhances the discharge of crushed material, and allows for rapid feed while achieving an ideal finish on the lower edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e The rigid monolithic design limits tool deflection under load and ensures high dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the end mill from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibration generated at the highest speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, dovetailing, and medium roughing and finishing operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as soft and hard wood, raw MDF board, plywood, and raw particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444676469076,"sku":"SC23.20.060.120.20TR","price":253.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC23.20.060.120.20TR_193.20.055.110.20RLM-105.jpg?v=1793968215"},{"product_id":"fresa-helicoidal-acabado-vhm-z3-d16-i72-l120-s16-rh-negativo-nadia","title":"Spiral router bit Finishing VHM Z3 D16 I72 L120 S16 RH negative NaDia","description":"\u003ch2\u003eThree-flute solid carbide end mill \u003cstrong\u003e16x72 mm\u003c\/strong\u003e from the \u003cstrong\u003eSC51\u003c\/strong\u003e series – ideal edge quality and high efficiency\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSC51.16.072.120.16XR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHigh-performance spiral end mill made from solid carbide (VHM) from the \u003cstrong\u003eSC51\u003c\/strong\u003e line, designed for precise cutting, shaping, grooving, and finishing on milling machines and CNC centres. The tool employs a three-flute spiral geometry in a \u003cstrong\u003eZ3\u003c\/strong\u003e\u0026nbsp;negative arrangement, which facilitates effective chip removal downwards. The use of high-quality micro-grain carbide ensures high resistance to abrasive wear and significantly extends the cutting edge's lifespan. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing assembly and guaranteeing an excellent finish quality of the machined material.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ3 finishing geometry (downward chip flow):\u003c\/strong\u003e Three cutting edges directing chips downwards guarantee a clean upper edge of the workpiece, preventing chipping and effectively avoiding veneer or laminate lift at high feed speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium solid carbide (VHM) construction:\u003c\/strong\u003e The rigid, monolithic structure prevents deformation of the mill under heavy force, allowing for narrow dimensional tolerances to be maintained.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of PVD coating:\u003c\/strong\u003e The option for applying protective coatings (e.g., TiSiN or PLATINIUM) allows for multiple extensions of edge life, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the mill from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing at a high \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) mitigates noise and reduces vibrations generated at high speeds (up to 18,000 RPM).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling, grooving, and edge finishing.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: soft and hard wood, raw and laminated MDF boards, raw and laminated plywood, as well as raw and laminated particle board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444677353812,"sku":"SC51.16.072.120.16XR","price":148.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SC51.16.072.120.16XR_SC51.16.072.120.16XR-111.jpg?v=1793968221"},{"product_id":"fresa-helicoidal-desbaste-vhm-z3-d6-i22-l70-s6-rh-positivo","title":"Spiral router bit Roughing VHM Z3 D6 I22 L70 S6 RH positive ","description":"\u003ch2\u003eVHM three-flute roughing end mill \u003cstrong\u003e6x22 mm\u003c\/strong\u003e from the \u003cstrong\u003eSF01\u003c\/strong\u003e series – maximum performance in rough machining\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSF01.06.022.070.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made from solid carbide (VHM) from the \u003cstrong\u003eSF01\u003c\/strong\u003e line, designed for intensive cutting, preliminary shaping, and efficient rough machining on overhead spindle milling machines and CNC centres. The tool features a three-flute spiral geometry with a roughing profile in a positive \u003cstrong\u003eZ3\u003c\/strong\u003e configuration, which ensures efficient chip removal upwards and a clean finish on the bottom edge of the workpiece. The dedicated roughing teeth effectively break the material into smaller particles, reducing cutting resistance and alleviating the machine's drive system. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing a high level of stability during operation.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ3 roughing design (upward eject):\u003c\/strong\u003e Three cutting edges with a roughing profile reduce operational resistance, efficiently remove chips upwards, and allow for machining at high feed rates while maintaining a clean bottom edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium solid carbide (VHM):\u003c\/strong\u003e The rigid monolithic construction limits tool deflection under load and ensures high dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of PVD coating:\u003c\/strong\u003e The option to apply protective coatings (e.g., TiSiN or PLATINIUM) can significantly extend edge life, reduce friction, and protect against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the end mill from turning in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) minimizes noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, preliminary shaping, and efficient rough machining.\u003c\/p\u003e\u003cp\u003eIt performs exceptionally well in machining materials such as: soft and hard wood, plywood, and raw particleboard and raw MDF board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444677583188,"sku":"SF01.06.022.070.06R","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SF01.06.022.070.06R_195.06.022.070.06R-111.jpg?v=1794296952"},{"product_id":"fresa-helicoidal-desbaste-vhm-z3-d14-i58-l110-s14-rh-positivo","title":"Spiral router bit Roughing VHM Z3 D14 I58 L110 S14 RH positive ","description":"\u003ch2\u003eVHM three-flute roughing spiral cutter with a 60° drilling tip \u003cstrong\u003e14x58 mm\u003c\/strong\u003e from the \u003cstrong\u003eSF05\u003c\/strong\u003e series – for door viewers\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSF05.14.058.110.14R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral cutter made of solid sintered carbide (VHM) from the \u003cstrong\u003eSF05\u003c\/strong\u003e line, designed for rough machining and creating holes for door viewers on overhead milling machines and CNC centres. The tool features a three-flute spiral geometry with a roughing profile in a \u003cstrong\u003eZ3\u003c\/strong\u003e configuration with a 60° front drilling tip, enabling stable penetration into the material and effective upward chip removal. The dedicated roughing tooth design reduces cutting resistance and relieves the machine's drive system. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e mitigates radial runout, protecting the spindle and ensuring a high level of stability during operation.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ3 roughing design with a 60° front drilling tip (upward chip evacuation):\u003c\/strong\u003e The roughing profile reduces working resistance and effectively removes chips upwards, while the special 60° drilling tip ensures clean and precise penetration into the material for door viewers.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium sintered carbide monolith (VHM):\u003c\/strong\u003e The rigid monolithic structure limits tool deflection under load and ensures high dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePossibility of applying a PVD coating:\u003c\/strong\u003e The option to apply protective layers (including TiSiN or PLATINIUM) allows for multiple extensions of edge lifespan, reduces friction and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (in accordance with ISO\/EN) minimises noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, material penetration, creating holes for door viewers, and efficient rough machining.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: soft and hard wood, plywood, as well as raw particleboard and raw MDF board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444677779796,"sku":"SF05.14.058.110.14R","price":110.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SF05.14.058.110.14R_195.14.058.110.14RV-104.jpg?v=1793968252"},{"product_id":"fresa-helicoidal-desbaste-vhm-z3-d16-i35-l90-s16-rh-positivo","title":"Spiral router bit Roughing VHM Z3 D16 I35 L90 S16 RH positive ","description":"\u003ch2\u003eThree-flute roughing end mill VHM \u003cstrong\u003e16x35 mm\u003c\/strong\u003e from the \u003cstrong\u003eSF01\u003c\/strong\u003e series – maximum efficiency in rough machining\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSF01.16.035.090.16R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made of solid carbide (VHM) from the \u003cstrong\u003eSF01\u003c\/strong\u003e line, designed for intensive cutting, preliminary shaping, and efficient rough machining on vertical machining centres and CNC machines. The tool utilises a three-flute spiral geometry with a roughing profile in a \u003cstrong\u003eZ3\u003c\/strong\u003e configuration with a positive arrangement, ensuring efficient chip removal upwards and a clean finish on the bottom edge of the workpiece. The dedicated roughing teeth effectively divide the material into smaller pieces, reducing cutting resistance and relieving the machine's drive system. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and ensuring a high level of stability during operation.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ3 roughing design (upward chip removal):\u003c\/strong\u003e Three cutting edges with a roughing profile reduce work resistance, efficiently remove chips upwards, and allow for machining at high feed rates while maintaining a clean bottom edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium solid carbide (VHM) construction:\u003c\/strong\u003e The rigid monolithic design minimizes tool deflection under load and ensures high dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAbility to apply PVD coating:\u003c\/strong\u003e The option to apply protective coatings (such as TiSiN or PLATINIUM) allows for multiple extensions of edge life, reduces friction, and protects against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the end mill from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) eliminates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, preliminary shaping, and efficient rough machining operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: softwood and hardwood, plywood, as well as raw particle board and raw MDF board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444678205780,"sku":"SF01.16.035.090.16R","price":108.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SF01.16.035.090.16R_DTA.16.035.090.16R-109_2d04e70d-7156-42e4-8174-bc199f36d258.jpg?v=1793969469"},{"product_id":"fresa-helicoidal-desbaste-vhm-z3-d20-i60-l120-s20-rh-positivo","title":"Spiral router bit Roughing VHM Z3 D20 I60 L120 S20 RH positive ","description":"\u003ch2\u003eThree-flute roughing solid carbide end mill \u003cstrong\u003e20x60 mm\u003c\/strong\u003e from the \u003cstrong\u003eSF01\u003c\/strong\u003e series – maximum performance in rough machining\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSF01.20.060.120.20R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial solid carbide end mill (VHM) from the \u003cstrong\u003eSF01\u003c\/strong\u003e line, designed for intensive cutting, preliminary shaping, and efficient roughing on spindle milling machines and CNC centres. The tool features a three-flute spiral geometry with a rough profile in the \u003cstrong\u003eZ3\u003c\/strong\u003e configuration with a positive layout, ensuring efficient chip removal upwards and a clean finish on the bottom edge of the workpiece. The dedicated roughing teeth effectively divide the material into smaller particles, reducing cutting resistance and relieving the machine's drive system. The ground shank with a tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and ensuring a high level of stability during operation.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ3 roughing design (upward chip removal):\u003c\/strong\u003e Three cutting edges with a rough profile reduce working resistance, efficiently remove chips upwards, and allow for machining at high feed rates while maintaining a clean bottom edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium solid carbide (VHM):\u003c\/strong\u003e The rigid monolithic construction limits tool deflection under load and ensures high dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOption for PVD coating:\u003c\/strong\u003e The option to apply protective coatings (including TiSiN or PLATINIUM) can significantly extend the tool's edge life, reduce friction, and protect against overheating.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the end mill from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimizes noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and range of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, preliminary shaping, and efficient rough machining.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: soft and hard wood, plywood, raw particle board, and raw MDF board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444683907412,"sku":"SF01.20.060.120.20R","price":219.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SF01.20.060.120.20R_SF01.20.060.120.20R-105.jpg?v=1791281669"},{"product_id":"fresa-helicoidal-desbaste-vhm-z3-d20-i102-l165-s20-rh-positivo-nadia","title":"Spiral router bit Roughing VHM Z3 D20 I102 L165 S20 RH positive NaDia","description":"\u003ch2\u003eVHM three-flute coarse spiral end mill \u003cstrong\u003e20x102 mm\u003c\/strong\u003e from the \u003cstrong\u003eSF01\u003c\/strong\u003e series – maximum efficiency in rough machining\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSF01.20.102.165.20XR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made of solid carbide (VHM) from the \u003cstrong\u003eSF01\u003c\/strong\u003e line, designed for intensive cutting, preliminary shaping and efficient rough machining on overhead spindle milling machines and CNC centres. The tool employs a three-flute spiral geometry with a coarse profile in a positive \u003cstrong\u003eZ3\u003c\/strong\u003e configuration, ensuring efficient chip removal upwards and a clean finish on the bottom edge of the workpiece. Dedicated coarse teeth effectively break the material into smaller pieces, reducing cutting resistance and alleviating the machine's drive system. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing a high level of stability during operation.\u003c\/p\u003e\u003ch3\u003eDesign features and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCoarse Z3 design (upward chip removal):\u003c\/strong\u003e Three cutting edges with a coarse profile reduce work resistance, efficiently remove chips upwards and allow for machining at high feed rates while maintaining a clean bottom edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium solid carbide (VHM) monolith:\u003c\/strong\u003e The rigid monolithic construction limits tool deflection under load and ensures high dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cb\u003eNaDia protective coating:\u003c\/b\u003e A specialist black PVD coating with a hardness of 3650 HV 0.05, a thickness of 1–4 µm and an extremely low friction coefficient (0.01–0.05) exhibits exceptional wear resistance, reduces cutting resistance, prevents material adhesion and significantly extends tool life.\u0026nbsp;\u0026nbsp;\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the end mill from rotating in the holder and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, preliminary shaping and efficient rough machining.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: soft and hard wood, plywood, and raw particle board and raw MDF board.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444684267860,"sku":"SF01.20.102.165.20XR","price":305.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SF01.20.102.165.20XR_SF01.20.102.165.20XR-112.jpg?v=1791281671"},{"product_id":"fresa-helicoidal-desbaste-vhm-z3-d20-i60-l120-s20-rh-negativo-nadia","title":"Spiral router bit Roughing VHM Z3 D20 I60 L120 S20 RH negative NaDia","description":"\u003ch1\u003eThree-flute roughing spiral end mill VHM from the SF51 series\u0026nbsp;\u003c\/h1\u003e\u003cp\u003eIndex: SF51.20.060.120.20XR\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made of solid carbide (VHM) from the \u003cstrong\u003eSF51\u003c\/strong\u003e\u0026nbsp; series with a negative design (chip removal downwards). Designed for efficient rough machining, cutting, and grooving on CNC machining centres and overhead milling machines. The left-hand spiral flute (negative) presses the material against the work table, eliminating the risk of tearing on the top edge of the workpiece. Three spiral cutting edges with a profiled chip breaker reduce cutting resistance, lower spindle load, and effectively dampen vibrations during intensive machining. The ground shank in accuracy class H6 protects the drive system and ensures high process stability.\u003c\/p\u003e\u003ch3\u003eKey technical parameters and properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThree-flute roughing design Z3 (negative):\u003c\/strong\u003e Dedicated roughing profile with downward chip removal presses the workpiece to the table and provides a perfectly finished, clean top edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePremium solid carbide (VHM):\u003c\/strong\u003e Rigid monolithic construction minimises tool deflection under load and guarantees high mechanical durability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGeometry with chip breaker:\u003c\/strong\u003e Divides the machined material into smaller pieces, reducing cutting resistance and stabilising operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOptimised shank roughness:\u003c\/strong\u003e The surface of the shank features low roughness (Ra ≤ 0.3 µm), preventing slippage in the holder and protecting the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing class G2.5:\u003c\/strong\u003e Static and dynamic balancing according to ISO\/EN standards (class G2.5) eliminates vibrations at maximum rotational speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdvanced protective coating NaDia (series .XR):\u003c\/strong\u003e Black PVD coating with extreme hardness of 3650 HV and very low friction coefficient (0.01–0.05) applied at low temperatures. Drastically increases blade wear resistance, prevents material sticking, and significantly extends tool life during machining of wood, laminates, plywood, plastics, and aluminium.\u0026nbsp;\u0026nbsp;\u003c\/li\u003e\u003c\/ul\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444684595540,"sku":"SF51.20.060.120.20XR","price":235.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SF51.20.060.120.20XR_SF51.20.060.120.20XR-111.jpg?v=1791281673"},{"product_id":"fresa-helicoidal-acabado-vhm-z1-1-d3-i20-l60-s3-rh-pos-neg","title":"Spiral router bit Finishing VHM Z1+1 D3 I20 L60 S3 RH pos.\/neg. ","description":"\u003ch2\u003eVHM compression finishing spiral cutter Z#number_of_edges_z from the SL01 series – ideal edge quality without chips\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSL01.03.020.060.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral cutter made from solid carbide (VHM) from the \u003cstrong\u003eSL01\u003c\/strong\u003e series with compression geometry. The tool is equipped with opposite screw line cutting edges that push chips down from the upper edge and up from the lower edge, pressing the laminate against the core of the board. Designed for finishing machining, cutting, jointing, and edging, as well as nesting cutting technology on CNC machining centres. The compression design eliminates the risk of chipping and tearing on both sides of the workpiece. The ground shank in accuracy class H6 minimises radial run-out, ensuring smooth processing and long spindle life.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The combination of right-hand and left-hand twist blades guarantees a smooth, clean edge without tearing on both the upper and lower surfaces of the board.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e Precisely sharpened cutting edges ensure high surface quality without the need for additional finishing machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid monolithic construction reduces tool deflection under load and maintains dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards eliminates vibrations at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting cutting, as well as jointing and edging on CNC machines.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: solid soft and hard wood, raw and laminated MDF board, raw and laminated chipboard, as well as raw and veneered plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444687315284,"sku":"SL01.03.020.060.03R","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SL01.03.020.060.03R_190.03.020.060.03R-107.jpg?v=1791281676"},{"product_id":"fresa-helicoidal-acabado-vhm-z1-1-d4-i21-l60-s4-rh-pos-neg-tisin","title":"Spiral router bit Finishing VHM Z1+1 D4 I21 L60 S4 RH pos.\/neg. TiSiN","description":"\u003ch2\u003eSpiral CNC finishing end mill Z#number_of_blades_z from the SL01 series – ideal edge quality without chipping\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSL01.04.021.060.04TR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made of solid sintered carbide (VHM) from the \u003cstrong\u003eSL01\u003c\/strong\u003e series with compression geometry. The tool is equipped with counter-rotating helical cutting edges that simultaneously push the chips down from the top edge and up from the bottom, pressing the laminate against the core of the board. Designed for finishing machining, cutting, edge banding, and nesting technology cutting on CNC machining centres. The compression design eliminates the risk of chipping and tearing on both sides of the machined material. The ground shank in the H6 accuracy class eliminates radial runout, ensuring smooth machining and a long spindle life.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The combination of right-hand and left-hand cutting edges guarantees a smooth, clean edge without chipping on both the upper and lower surfaces of the board.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing cutting edge geometry:\u003c\/strong\u003e Precisely sharpened cutting edges ensure high surface quality without the need for additional finishing processing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid sintered carbide (VHM):\u003c\/strong\u003e The rigid monolithic construction reduces tool deflection under load and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards eliminates vibrations at high rotational speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecial protective coating TiSiN:\u003c\/strong\u003e A copper-coloured PVD coating, 1–4 µm thick, with high microhardness of 3570 HV (HV 0.05). It exhibits excellent resistance to abrasive and thermal wear when working at high cutting temperatures, significantly extending the blade life and reducing the frequency of tool replacement.\u0026nbsp;\u0026nbsp;\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, nesting technology cutting, as well as edge banding and edge leveling on CNC machines.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: solid soft and hard wood, raw and laminated MDF board, raw and laminated chipboard, and raw and veneered plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444687741268,"sku":"SL01.04.021.060.04TR","price":21.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SL01.04.021.060.04TR_SL01.04.021.060.04TR-102.jpg?v=1791281679"},{"product_id":"fresa-helicoidal-acabado-vhm-z2-2-d5-i22-l60-s5-rh-pos-neg","title":"Spiral router bit Finishing VHM Z2+2 D5 I22 L60 S5 RH pos.\/neg. ","description":"\u003ch2\u003eVHM spiral end mill compression finishing Z#liczba_ostrzy_z from the SM01 series – ideal edge quality without chipping\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSM01.05.022.060.05R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made from solid carbide (VHM) from the \u003cstrong\u003eSM01\u003c\/strong\u003e series with a compression geometry. The tool is equipped with opposing helical flutes that simultaneously push the chips down from the upper edge and up from the lower edge, pressing the laminate against the core of the board. Designed for finishing, cutting, edging, and trimming as well as nesting technology cutting on CNC machining centres. The compression design eliminates the risk of chipping and tearing on both sides of the workpiece. The ground shank in accuracy class H6 minimises radial runout, ensuring smooth machining and long spindle life.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The combination of right-hand and left-hand helix flutes guarantees a smooth, clean edge without chipping on both the top and bottom surfaces of the board.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing cutting edge geometry:\u003c\/strong\u003e Precisely ground cutting edges ensure high surface quality without the need for additional finishing operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid monolithic construction reduces tool deflection under load and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards eliminates vibrations at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and areas of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting technology cutting, as well as edging and trimming on CNC machines.\u003c\/p\u003e\u003cp\u003eIt works perfectly for machining materials such as: solid softwood and hardwood, raw and laminated MDF boards, raw and laminated particle boards, as well as raw and veneered plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444688036180,"sku":"SM01.05.022.060.05R","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SM01.05.022.060.05R_190.05.022.060.05R-105.jpg?v=1791281682"},{"product_id":"fresa-helicoidal-acabado-vhm-z2-2-d12-i25-l70-s12-rh-pos-neg","title":"Spiral router bit Finishing VHM Z2+2 D12 I25 L70 S12 RH pos.\/neg. ","description":"\u003ch2\u003eVHM Compression Finishing Spiral End Mill Z#number_of_edges_z from the SM01 series – perfect edge quality without chipping\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSM01.12.025.070.12R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made from solid carbide (VHM) from the \u003cstrong\u003eSM01\u003c\/strong\u003e series with compression geometry. The tool is equipped with opposing screw lines of the cutting edges, which simultaneously push the chip down from the upper edge and up from the lower edge, pressing the laminate against the plate core. Designed for finishing operations, cutting, edging and aligning edges as well as nesting technology cutting on CNC machining centres. The compression design eliminates the risk of chipping and tearing on both sides of the workpiece material. The ground shank in class H6 reduces radial runout, ensuring smooth machining and a long spindle life.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression Geometry (Positive-Negative):\u003c\/strong\u003e The combination of right-hand and left-hand twisted edges guarantees a smooth, clean edge without chipping on both the upper and lower surfaces of the plate.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing Edge Geometry:\u003c\/strong\u003e Precisely ground cutting edges ensure high surface quality without the need for additional finishing operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid Carbide (VHM):\u003c\/strong\u003e The rigid monolithic construction reduces tool deflections under load and maintains dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Shank Roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards eliminates vibrations at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for operations such as cutting, nesting technology cutting, edging and aligning edges on CNC machines.\u003c\/p\u003e\u003cp\u003eIt performs excellently when machining materials such as: soft and hard solid wood, raw and laminated MDF board, raw and laminated chipboard, as well as raw and veneered plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444688494932,"sku":"SM01.12.025.070.12R","price":68.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SM01.12.025.070.12R_190.12.025.070.12R-102.jpg?v=1791281684"},{"product_id":"fresa-helicoidal-acabado-vhm-z2-2-d12-i52-l100-s12-rh-pos-neg","title":"Spiral router bit Finishing VHM Z2+2 D12 I52 L100 S12 RH pos.\/neg. ","description":"\u003ch2\u003eVHM spiral end mill compression finishing Z#liczba_ostrzy_z from the SM01 series – perfect edge quality without chipping\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSM01.12.052.100.12R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial spiral end mill made of solid carbide (VHM) from the \u003cstrong\u003eSM01\u003c\/strong\u003e series with compression geometry. The tool is equipped with opposing spiral tooth lines that simultaneously push chips down from the upper edge and up from the lower edge, pressing the laminate to the core of the board. Designed for finishing machining, cutting, edging, and trimming, as well as nesting technology cutting on CNC machining centres. The compression design eliminates the risk of chipping and tearing on both sides of the work material. The ground shank in H6 accuracy class eliminates radial runout, ensuring smooth processing and long spindle life.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompression geometry (Positive-Negative):\u003c\/strong\u003e The combination of right and left twist blades guarantees a smooth, clean edge without chipping on both the upper and lower surfaces of the board.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFinishing blade geometry:\u003c\/strong\u003e Precisely ground cutting edges ensure high surface quality without the need for additional finishing machining.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e The rigid monolithic structure reduces tool deflection under load and maintains dimensional precision.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank surface prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards eliminates vibrations at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting technology cutting, as well as edging and trimming on CNC machines.\u003c\/p\u003e\u003cp\u003eIt works excellently with materials such as: solid soft and hard wood, raw and laminated MDF board, raw and laminated particle board, as well as raw and veneered plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444688724308,"sku":"SM01.12.052.100.12R","price":81.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SM01.12.052.100.12R_190.12.052.100.12R-104.jpg?v=1791281686"}],"url":"https:\/\/es.ita.tools\/en\/collections\/spiral-router-bits.oembed?page=31","provider":"ITA TOOLS","version":"1.0","type":"link"}