{"title":"Straight router bits","description":"","products":[{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d8-i15-l60-s8-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D8 I15 L60 S8 RH Finishing","description":"\u003ch2\u003eTwo-flute straight VHM finishing cutter for foams and plastics – neutral chip ejection and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.08.015.060.08XE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute straight cutter made of solid carbide (VHM) with a simple blade geometry (neutral chip ejection to the sides). The Z2 design is intended for precise finishing of foams, plastics, and composite boards. The straight cutting edges do not exert vertical forces (either compressive or lifting), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished chip grooves minimise friction and prevent sticking and melting of soft materials. The tool is dedicated to finishing cuts, bonding, and grooving on CNC machining centres and overhead milling machines. The ground shank in H6 class eliminates radial run-out and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e The smooth surface facilitates free removal of chips, preventing the melting of plastics and sticking of cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction guarantees dimensional stability and longer blade life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the shank (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank prevents slipping in the holder and protects the cone of the spindle from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eNaDia protective coating:\u003c\/strong\u003e A specialist protective layer with a very low friction coefficient (0.01–0.05) and high hardness (3650 HV 0.05) protects the cutting edge from wear, prevents sticking of chips, and significantly extends tool life.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for finishing cuts, bonding, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in machining materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444627808596,"sku":"SY26.08.015.060.08XE","price":48.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.08.015.060.08XE_SY26.08.015.060.08XE-112.jpg?v=1791281438"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d3-i15-l60-s3-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D3 I15 L60 S3 RH Finishing","description":"\u003ch2\u003eTwo-flute straight end mill VHM for finishing foams and plastics – neutral chip ejection and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.03.015.060.03R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute straight end mill made from solid carbide (VHM) with a simple blade geometry (neutral chip ejection sideways). The Z2 design has been engineered for precise finishing of foams, plastics, and composite boards. The straight cutting edges do not exert vertical forces (either pressing or lifting), which prevents the deformation of soft materials and guarantees a smooth finish on both sides of the part. Polished chip flutes reduce friction and prevent sticking and melting of soft plastics. The tool is dedicated to finishing cuts, seam cutting, and grooving on CNC machining centres and overhead spindle milling machines. The ground shank in H6 tolerance eliminates radial run-out and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes:\u003c\/strong\u003e Smooth surface facilitates the free removal of chips, preventing the melting of plastics and sticking of cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction guarantees dimensional stability and longer tool life during continuous work.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for finishing cutting, seam cutting, and grooving soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444628496724,"sku":"SY26.03.015.060.03R","price":12.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.03.015.060.03R_912.03.015.060.03RPI-104.jpg?v=1791281441"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d8-i15-l60-s8-rh-acabado-1","title":"straight router bit for foam \u0026 plastics VHM Z2 D8 I15 L60 S8 RH Finishing","description":"\u003ch2\u003eTwo-flute VHM finishing cutter for foams and plastics – neutral chip removal and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.08.015.060.08XR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute straight cutter made from solid carbide (VHM) with simple blade geometry (neutral chip removal to the sides). The Z2 design is intended for precise finishing of foams, plastics, and composite panels. The straight cutting edges do not exert vertical forces (either compressive or lifting), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished chip flutes reduce friction and prevent the sticking and melting of soft plastics. The tool is dedicated to finishing cuts, jointing, and grooving on CNC machining centres and overhead milling machines. The ground shank in class H6 eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes:\u003c\/strong\u003e Smooth surface facilitates free removal of chips, preventing plastics from melting and sticking to the cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction ensures dimensional stability and longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eProtective coating NaDia:\u003c\/strong\u003e Specialist protective layer with a very low coefficient of friction (0.01–0.05) and high hardness (3650 HV 0.05) protects the cutting edge from wear, prevents chip adhesion, and significantly extends tool life.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and areas of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for finishing cuts, jointing, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in the processing of materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composites such as CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444632101204,"sku":"SY26.08.015.060.08XR","price":52.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.08.015.060.08XR_912.08.015.060.08XRI-109_095c68ec-ee5f-4c42-8800-c6f5ced8990a.jpg?v=1794299149"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d4-i15-l75-s4-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D4 I15 L75 S4 RH Finishing","description":"\u003ch2\u003eTwo-flute VHM finishing end mill for foams and plastics – neutral chip removal and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.04.015.075.04R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute end mill made from solid carbide (VHM) with simple cutting edge geometry (neutral chip removal to the sides). The Z2 design has been engineered for precise finishing of foams, plastics, and composite boards. The straight cutting edges do not exert vertical forces (neither downward nor upward), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished chip channels reduce friction and prevent adhesion and melting of soft materials. The tool is dedicated to finishing cuts, grooving, and pocketing on CNC machining centres and overhead milling machines. The H6 grade ground shank eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e Smooth surface facilitates free chip removal, preventing the melting of plastics and sticking to the cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction guarantees dimensional stability and extended tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for finishing cutting, grooving, and pocketing operations on soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444633051476,"sku":"SY26.04.015.075.04R","price":15.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.04.015.075.04R_912.04.015.075.04RPI-107.jpg?v=1791281467"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d8-i70-l120-s8-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D8 I70 L120 S8 RH Finishing","description":"\u003ch2\u003eTwo-edge straight VHM finishing cutter for foams and plastics – neutral chip ejection and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.08.070.120.08R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-edge straight cutter made of solid carbide (VHM) with a simple blade geometry (neutral chip ejection to the sides). The Z2 design is intended for precise finishing of foams, plastics, and composite panels. The straight cutting edges do not exert vertical forces (either downward or upward), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished chip flutes reduce friction and prevent sticking and melting of soft plastics. The tool is dedicated to finishing cuts, jointing, and grooving on CNC machining centres and overhead milling machines. The ground shank in H6 class eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-edge straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e Smooth surface facilitates the free removal of chips, preventing melting of materials and adhesive build-up on cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction ensures dimensional stability and longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotation speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for finishing cutting operations, jointing, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for processing materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444633608532,"sku":"SY26.08.070.120.08R","price":79.05,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.08.070.120.08R_912.08.070.150.08RPI-112_567d134f-bfa6-46d0-9769-83a8fd9db0b8.jpg?v=1794296939"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d10-i15-l60-s10-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D10 I15 L60 S10 RH Finishing","description":"\u003ch2\u003eTwo-flute finishing end mill for foams and plastics – neutral chip removal and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.10.015.060.10XR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute end mill made from solid tungsten carbide (VHM) with a simple cutting edge geometry (neutral chip removal to the sides). The Z2 design has been developed for precise finishing of foams, plastics, and composite panels. The straight cutting edges do not create vertical forces (neither pressing nor lifting), preventing the deformation of soft materials and ensuring a smooth finish on both sides of the detail. Polished chipways reduce friction and prevent sticking and melting of soft plastics. The tool is dedicated to finishing cuts, joining, and grooving on CNC machining centres and overhead spindle milling machines. The ground shank in class H6 eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute simple geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chipways:\u003c\/strong\u003e Smooth surface facilitates easy removal of chips, preventing the melting of materials and sticking of cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid tungsten carbide (VHM):\u003c\/strong\u003e Sturdy construction guarantees dimensional stability and longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle cone from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eProtective NaDia coating:\u003c\/strong\u003e A specialised protective layer with a very low coefficient of friction (0.01–0.05) and high hardness (3650 HV 0.05) protects the cutting edge from wear, prevents chip sticking, and significantly extends tool life.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for finishing cutting, joining, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for processing materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444641210708,"sku":"SY26.10.015.060.10XR","price":46.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.10.015.060.10XR_912.10.015.060.10XRi-111.jpg?v=1791281493"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d10-i15-l60-s12-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D10 I15 L60 S12 H3,5 RH","description":"\u003ch2\u003ePCD Diamond End Mill DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.10.015.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond end mill from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, trimming and finishing operations on CNC machining centres and overhead milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The blades are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – made of heavy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e alloy (a tungsten metal alloy that dampens vibrations during cutting). The compression system protects the laminate from chipping edges from the top and bottom, while the front diamond plate ensures smooth tool entry into the material along the Z axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Processing (Ablation):\u003c\/strong\u003e The cutting tool profiles are finished directly with a laser beam, achieving edge radii around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Grooves and Entry Area:\u003c\/strong\u003e The smoothed back of the PCD diamond plates combined with spacious chip channels prevents material from sticking and improves quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Grip Part:\u003c\/strong\u003e The shaft surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of wear on the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in a high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, contour milling, grooving, notching, and sinking into material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, composites with glass and carbon fibre (GFRP\/CFRP), HPL boards, aluminium and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444645536084,"sku":"DTS.10.015.12.0DR","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.10.015.12.0DR_DTS.10.015.12.0DR-112.jpg?v=1791281507"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d12-i25-l70-s12-h3-rh","title":"PCD straight diamond router bit Z2+1 D12 I25 L70 S12 H3 RH","description":"\u003ch2\u003ePCD Diamond Router Bit with Cutting Edge – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.12.025.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond router from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead spindle milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3\u003c\/strong\u003e). The blades are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from a heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during cutting). The compression system protects the laminate from edge chipping from both the top and bottom, while the front diamond plate ensures seamless entry of the tool into the material in the Z-axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Processing of Cutting Edges (Ablation):\u003c\/strong\u003e DIA blade profiles are finished directly by a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Flute Grooves and Rake Area:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with spacious chip channels prevents chip adhesion and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Grip Section:\u003c\/strong\u003e The shaft surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the router from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in a high class of \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with a plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, contour milling, t-slotting, grooving, and pocketing in the material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444645699924,"sku":"DTS.12.025.12.0DR","price":212.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.12.025.12.0DR_DTS.12.025.12.0DR-207.jpg?v=1791281510"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d8-i20-l75-s12-h3-rh","title":"PCD straight diamond router bit Z2+1 D8 I20 L75 S12 H3 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter with Twin Edges DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.08.020.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting operations, formatting, and finishing machining on CNC machining centres and overhead spindle milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a frontal drilling blade (\u003cstrong\u003ePCD Z2+1 H3\u003c\/strong\u003e). The edges are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy dampening vibrations during cutting). The compression arrangement protects the laminate from edge chipping from above and below, while the frontal diamond plate ensures a smooth entry of the tool into the material along the Z-axis. The precise gripping tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and ensuring optimal machining quality.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with voluminous chip channels prevents material cling and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the holder:\u003c\/strong\u003e The shaft surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in an enhanced class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, jointing, grooving, and sinking in material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboard and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444646027604,"sku":"DTS.08.020.12.0DR","price":189.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.08.020.12.0DR_DTS.08.020.12.0DR-103.jpg?v=1791281512"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d12-i20-l70-s12-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D12 I20 L70 S12 H3,5 RH","description":"\u003ch2\u003ePCD diamond cutter two-edged DTS with drilling blade – for nesting and finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.12.020.12.0MR\u003c\/p\u003e\u003cp\u003eProfessional diamond cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a frontal drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The blades are mounted on a sintered carbide HM body with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from a heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during machining). The compression system protects the laminate from edge chipping from the top and bottom, while the frontal diamond plate ensures smooth tool entry into the material along the Z axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The blade profiles of DIA are finished directly with a laser beam, allowing edge radii to reach levels of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents workpiece sticking and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shaft surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specifications (height of PCD plate):\u003c\/strong\u003e plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2-3 times\u003c\/strong\u003e, while the version with plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3-4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, contour milling, mortising, grooving, and plunging into the material.\u003c\/p\u003e\u003cp\u003eIt works perfectly in machining materials such as: raw and laminated chipboard and MDF, raw and laminated plywood, glass fibre and carbon fibre composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444646060372,"sku":"DTS.12.020.12.0MR","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.12.020.12.0MR_DTS.12.020.12.0MR-102.jpg?v=1791281514"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d8-i15-l60-s12-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D8 I15 L60 S12 H3,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter with Two Edges DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.08.015.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead spindle milling machines. The cutter features two solid plates of polycrystalline diamond arranged in a compressive geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The blades are mounted on a body made of sintered carbide monolith HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – made of heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during cutting). The compressive arrangement protects the laminate from chipping at the edges from above and below, while the front diamond plate ensures smooth entry of the tool into the material in the Z-axis. The precise tolerance class of the shank \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eStructural Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii of approximately \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Cutting Zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate, combined with voluminous chip channels, prevents workpiece adhesion and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing at a high \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e A plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with a plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Range of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, jointing, grooving, and sinking into the material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, composites with glass and carbon fibres (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444646125908,"sku":"DTS.08.015.12.0DR","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.08.015.12.0DR_DTS.08.0158.12.0DR-109_50b243c9-b94b-429f-b73c-cd62ce3bf45d.jpg?v=1793969152"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d12-i20-l66-s12-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D12 I20 L66 S12 H3,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter Double-Edged DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.12.020.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead spindle milling machines. The blade construction features two full polycrystalline diamond plates arranged in a compressive geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The blades are mounted on a sintered monolithic carbide HM body with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from the heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (tungsten metal alloy that dampens vibrations during cutting). The compressive arrangement protects the laminate from chipping on the edges from above and below, while the front diamond plate ensures smooth entry of the tool into the material along the Z-axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial run-out, protecting the spindle and ensuring optimal machining quality.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Treatment (Ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Ramping Zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip channels prevents chip adherence and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Grip:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e the \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e plate allows sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with the \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e plate allows sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, peripheral milling, grooving, and sinking into the material.\u003c\/p\u003e\u003cp\u003eIt is perfectly suited for machining materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), HPL panels, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444646650196,"sku":"DTS.12.020.12.0DR","price":189.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.12.020.12.0DR_DTS.12.020.12.0DR-107.jpg?v=1791281518"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d8-i15-l70-s8-h3-5-rh","title":"PCD straight diamond router bit Z2+1 D8 I15 L70 S8 H3,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter DTS with Drilling Blade – for Nesting and Finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.08.015.08.0MR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting operations, formatting, and finishing machining on CNC machining centres and overhead milling machines. The blade construction consists of two full polycrystalline diamond inserts arranged in a compressive geometry (positive-negative) along with a frontal drilling blade (\u003cstrong\u003ePCD Z2+1 H3,5\u003c\/strong\u003e). The inserts are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from the heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during cutting). The compressive arrangement protects the laminate from edge chipping from above and below, while the frontal diamond insert ensures a smooth entry of the tool into the material along the Z-axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser edge processing (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii in the range of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents material buildup and facilitates rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and minimises vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (PCD insert height):\u003c\/strong\u003e The insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with an insert \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, peripheral milling, dovetailing, grooving, and plunging into the material.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as raw and laminated chipboards, MDF, raw and laminated plywood, composites with glass and carbon fibre (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444647010644,"sku":"DTS.08.015.08.0MR","price":132.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.08.015.08.0MR_DTS.08.015.08.0MR-306.jpg?v=1793967832"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d20-i25-l85-s20-h3-rh","title":"PCD straight diamond router bit Z2+1 D20 I25 L85 S20 H3 RH","description":"\u003ch2\u003eTwo-edged PCD diamond cutter DTS with drilling blade – for nesting and finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.20.025.20.0SR\u003c\/p\u003e\u003cp\u003eA professional diamond cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compressive geometry (positive-negative) along with a frontal drilling blade (\u003cstrong\u003ePCD Z2+1 H3\u003c\/strong\u003e). The blades are mounted on a body made of sintered HM carbide monolith with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – made of a heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten metal alloy that dampens vibrations during cutting). The compressive system protects the laminate from chipping at the top and bottom, while the frontal diamond plate ensures smooth entry of the tool into the material along the Z-axis. The precise gripping tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, allowing for edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with capacious chip channels prevents the workpiece from sticking and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of the PCD plate):\u003c\/strong\u003e The plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, whereas the variant with the plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, mortising, grooving, and embedding into materials.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, fibre-reinforced composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444647338324,"sku":"DTS.20.025.20.0SR","price":194.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.20.025.20.0SR_DTS.20.025.20.0SR-110.jpg?v=1793967837"},{"product_id":"fresa-diamantada-recta-pcd-z3-d12-i15-l85-s12-h3-5-rh","title":"PCD straight diamond router bit Z3 D12 I15 L85 S12 H3,5 RH","description":"\u003ch1\u003eThree-blade PCD Diamond Cutter\u003c\/h1\u003e\u003cp\u003eIndex: DT3.12.015.12.0SR\u003c\/p\u003e\u003cp\u003eIndustrial three-blade diamond cutter from the \u003cstrong\u003eDT3\u003c\/strong\u003e series, equipped with polycrystalline diamond (PCD) blades. The tool is designed for high-performance cutting, shaping, leveling, grooving and slotting of wood-based and composite materials on CNC machining centres. The body made of sintered carbide with a hardness of 93.8 HRA or high-quality stainless steel ensures maximum rigidity and stability during machining. The PCD blades set in negative or straight geometry provide a clean edge and outstanding longevity. The tool design allows for multiple sharpening (2–4 times depending on the height of the diamond insert), significantly reducing operating costs. The ground shank in accuracy class H6 protects against radial runout.\u003c\/p\u003e\u003ch3\u003eKey technical parameters and properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003ePolycrystalline diamond (PCD) blades:\u003c\/strong\u003e Three full PCD blades with negative or straight geometry ensure outstanding durability and clean quality of the processed material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReinforced body:\u003c\/strong\u003e Made from sintered carbide (93.8 HRA) or stainless steel, eliminating vibrations and providing high dimensional stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMultiple sharpening capability:\u003c\/strong\u003e PCD inserts with a height of H2.5 allow for 2–3 sharpening cycles, while a height of H3 enables 3–4 regeneration operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOperational versatility:\u003c\/strong\u003e Blade geometry adapted for cutting, shaping, angular connections, grooving and making slots.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOptimised grip roughness:\u003c\/strong\u003e Low grip surface roughness (Ra ≤ 0.3 µm) prevents slipping in the holder and protects the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Static-dynamic balancing in accordance with ISO\/EN standard (class G2.5) protects spindle bearings and ensures vibration-free operation.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and material suitability:\u003c\/h3\u003e\u003cp\u003eDedicated to mass machining on CNC machines and overhead milling machines in the furniture and carpentry industry.\u003c\/p\u003e\u003cp\u003eMaterial being processed: Raw and laminated MDF, raw and laminated chipboard, cement-bonded fibreboards, glass and carbon fibre composites, Corian®, HPL, raw and laminated plywood, and aluminium.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648059220,"sku":"DT3.12.015.12.0SR","price":204.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT3.12.015.12.0SR_DT3.12.015.12.0SR-308.jpg?v=1793967615"},{"product_id":"fresa-diamantada-pcd-z1-1-d8-i21-l69-s12-h2-5-rh","title":"PCD diamond router bit Z1+1 D8 I21 L69 S12 H2,5 RH","description":"\u003ch2\u003ePCD diamond milling cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.08.021.12.0SR\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series intended for formatting and finishing processing on CNC centres and overhead milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – sintered carbide monolith (HM). Thoughtful geometry of the cutting edges ensures stable guiding in the processed material, while the high clamping precision class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial run-out, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond insert combined with capacious chip channels prevents sticking of the material and facilitates rapid removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the clamping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the highly demanded class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBlade sharpening specification (height of PCD insert):\u003c\/strong\u003e depending on the height of the applied diamond blade: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling and mortising operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated particle boards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648223060,"sku":"DTA.08.021.12.0SR","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.08.021.12.0SR_DTA.08.021.12.0SR-102.jpg?v=1793967620"},{"product_id":"fresa-diamantada-pcd-z1-1-d8-i27-l81-s8-h2-5-rh","title":"PCD diamond router bit Z1+1 D8 I27 L81 S8 H2,5 RH","description":"\u003ch2\u003eDiamond PCD milling cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.08.027.08.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead milling machines. The tool's construction is based on a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of steel with increased hardness (\u003e 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high accuracy class of the grip \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is offered in both right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly by a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents chip sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimises noise and reduces vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD insert):\u003c\/strong\u003e Depending on the height of the applied diamond blade: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and area of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and mortising.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648354132,"sku":"DTA.08.027.08.0MR","price":83.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.08.027.08.0MR_DTA.08.027.08.0MR-108.jpg?v=1793967620"},{"product_id":"fresa-diamantada-pcd-z1-1-d12-i25-l74-s12-h2-5-rh","title":"PCD diamond router bit Z1+1 D12 I25 L74 S12 H2,5 RH","description":"\u003ch2\u003ePCD diamond milling cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.025.12.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead routers. The tool's design is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are mounted on a body made of steel with increased hardness (\u003e 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while a high grip accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial run-out, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is offered in both right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, which allows achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents material sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimises vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 re-sharpenings\u003c\/strong\u003e, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444648681812,"sku":"DTA.12.025.12.0SR","price":39.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.025.12.0SR_DTA.025.12.0SR-108.jpg?v=1794296944"},{"product_id":"fresa-diamantada-pcd-z1-1-d12-i27-l81-s12-h2-5-rh","title":"PCD diamond router bit Z1+1 D12 I27 L81 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.027.12.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead spindle milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front insert made of carbide (HM). The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or - in selected variants - from sintered carbide monolith (HM). The thoughtfully designed cutting edge geometry ensures stable guidance in the material being processed, while the high gripping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial run-out, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip flutes and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip flutes prevents the workpiece from sticking and facilitates quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the tool holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibration generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specifications (height of the PCD insert):\u003c\/strong\u003e Depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and grooving.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444649599316,"sku":"DTA.12.027.12.0MR","price":101.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.027.12.0MR_DTA.12.027.12.0MR-108.jpg?v=1794296944"},{"product_id":"fresa-diamantada-pcd-z1-d12-7-i36-l91-s12-h2-5-rh","title":"PCD diamond router bit Z1 D12,7 I36 L91 S12 H2,5 RH","description":"\u003ch2\u003ePCD DTA Diamond Milling Cutter for Finish Machining of Boards and Plywood with Bearing\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.036.12.BSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is intended for formatting and finish machining on CNC centres and overhead spindle milling machines. The tool's construction is based on a diamond blade arranged on three spirals and a front plate made from sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high grip accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTemplate Guidance with Bottom Bearing:\u0026nbsp;\u003c\/strong\u003eThe built-in guide bearing located on the front part of the cutter enables precise shape copying according to a template without the risk of damaging the material's edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Area:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip flutes prevents chip adherence and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wearing the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e depending on the height of the applied diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e sharpening, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e sharpening, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 times.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444649959764,"sku":"DTA.12.036.12.BSR","price":71.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.036.12.BSR_DTA.12.036.12.BSR-306.jpg?v=1793972971"},{"product_id":"fresa-diamantada-pcd-z1-1-d16-i35-l95-s16-h2-5-rh","title":"PCD diamond router bit Z1+1 D16 I35 L95 S16 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.16.035.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The edges of the DIA blades are finished directly with a laser beam, which allows achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting surface free from micro-notches.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond insert combined with deep chip channels prevents material from sticking and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from spinning in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 norm:\u003c\/strong\u003e Certified static-dynamic balancing in a strict class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD insert):\u003c\/strong\u003e depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening cycles\u003c\/strong\u003e, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, versions \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Range of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and rebating.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444650156372,"sku":"DTA.16.035.16.0SR","price":52.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.16.035.16.0SR_DTA.16.035.16.0SR-111.jpg?v=1791281545"},{"product_id":"fresa-diamantada-pcd-z1-1-d16-i55-l114-s16-h2-5-rh","title":"PCD diamond router bit Z1+1 D16 I55 L114 S16 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.16.055.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead milling machines. The tool’s construction is based on a diamond blade arranged on three spirals and a front carbide (HM) plate. The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high precision grip class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smooth rear part of the PCD diamond plate combined with spacious chip channels prevents material sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the grip part:\u003c\/strong\u003e The shank surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from spinning in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing according to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, and contouring.\u003c\/p\u003e\u003cp\u003eIt works excellently in processing materials such as: raw and laminated chipboards, MDF boards, and both raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444650844500,"sku":"DTA.16.055.16.0SR","price":78.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.16.055.16.0SR_DTA.16.055.16.0SR-108.jpg?v=1791281548"},{"product_id":"fresa-diamantada-pcd-z1-1-d18-i35-l90-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D18 I35 L90 S20 H2,5 LH","description":"\u003ch2\u003ePCD Diamond Router Bit from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.18.035.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond router bit from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for profiling and finishing processing on CNC centres and overhead spindle milling machines. The tool's design features a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of high hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtfully designed cutting edge geometry ensures stable guidance in the material being processed, while the high grip accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is available in both right and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, allowing edge radii to reach levels of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Entry Zone:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with voluminous chip channels prevents the sticking of the material and facilitates rapid removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the router against rotation in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balance in G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) mitigates noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Insert):\u003c\/strong\u003e Depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Scope of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, profile milling, and mortising operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated particle boards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651204948,"sku":"DTA.18.035.20.0SL","price":52.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.18.035.20.0SL_DTA.16.036.16.0SL-108.jpg?v=1791281550"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i55-l113-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D20 I55 L113 S20 H2,5 LH","description":"\u003ch2\u003eDiamond PCD milling cutter from the DTA series for finishing machining of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.20.055.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing machining on CNC centres and overhead spindle milling machines. The tool's construction is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high accuracy class of the grip \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, allowing edge radii to be achieved at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and leading edge zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with spacious chip channels prevents material sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter against rotation in the holder and eliminates the risk of wear on the taper in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and diminishes vibrations generated at maximum speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e Depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, and slotting.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651532628,"sku":"DTA.20.055.20.0SL","price":78.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.20.055.20.0SL_DTA.20.055.20.0SL-409.jpg?v=1791281552"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i72-l136-s20-h2-5-rh","title":"PCD diamond router bit Z1+1 D20 I72 L136 S20 H2,5 RH","description":"\u003ch2\u003eDiamond Milling Cutter PCD from the DTA Series for Finish Machining of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.20.072.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finish machining on CNC centres and overhead milling machines. The tool's construction is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are mounted on a body made of steel with increased hardness (\u0026gt; 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The thoughtfully designed geometry of the cutting edges ensures stable guidance in the machined material, while the high gripping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eConstruction Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Rake Area:\u003c\/strong\u003e The smoothed back part of the PCD diamond plate combined with capacious chip channels prevents clinging of the workpiece and facilitates rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of Gripping Part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to Standard G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Plate):\u003c\/strong\u003e Depending on the height of the diamond blade used: the plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, the plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Range of Application:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting operations, peripheral milling and jointing.\u003c\/p\u003e\u003cp\u003eIt is perfectly suited for processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651696468,"sku":"DTA.20.072.20.0SR","price":120.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.20.072.20.0SR_DTA.20.075.20.0SR-111.jpg?v=1791281555"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i55-l69-s20-h2-5-rh","title":"PCD diamond router bit Z1+1 D20 I55 L69 S20 H2,5 RH","description":"\u003ch2\u003eDiamond milling cutter PCD single blade DTB PRO – for finishing machining of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTB.20.055.20.SSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the DTB\u003cstrong\u003e\u0026nbsp;PRO\u003c\/strong\u003e series is designed for high-performance formatting and finishing milling on CNC centres and overhead spindle milling machines. The tool features a single, full-sized diamond blade (PCD) arranged on three spirals with an enhanced axial angle, supported by a front drilling plate made of cemented carbide (HM). The durable body made of high-hardness steel (\u0026gt; 28 HRC) is characterised by a specially profiled geometry that facilitates the ejection of dust and debris. The ground shank in a strict accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and ensuring trouble-free operation and a high standard of edge finishing.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEnhanced axial angle and improved body design:\u003c\/strong\u003e Increased axial inclination of the blades on the spiral combined with the special geometry of the body facilitates rapid chip removal, eliminating the phenomenon of re-grinding and overheating of the cutter.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly by a laser beam, achieving edge radii on the order of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free of micro chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with capacious chip channels prevents the adhesion of debris and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank in class H6 with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimizes noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, whereas plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling and trenching.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated MDF boards, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444651729236,"sku":"DTB.20.055.20.SSR","price":81.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTB.20.055.20.SSR_DTB.20.055.20.SSR-111.jpg?v=1791281557"},{"product_id":"fresa-diamantada-recta-pcd-z2-d12-i15-l73-s12-h3-rh","title":"PCD straight diamond router bit Z2 D12 I15 L73 S12 H3 RH","description":"\u003ch2\u003ePCD Diamond End Mill DT2 – for precise finishing and formatting machining\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue index:\u003c\/strong\u003e\u0026nbsp;DT2.12.015.12.0MR\u003c\/p\u003e\u003cp\u003eThe industrial diamond end mill from the \u003cstrong\u003eDT2\u003c\/strong\u003e series features two full PCD diamond blades H3 mm, designed for highly efficient formatting and finishing machining on spindle mills and CNC machines. The tool's structure consists of a stable body made of sintered carbide HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of rigidity, while the precise clamping tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively eliminates radial run-out, protecting the spindle bearings and ensuring ideal edge finishing.\u003c\/p\u003e\u003ch3\u003eKey features and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-sharpened cutting edges (ablation):\u003c\/strong\u003e The DIA blades are finished using a laser beam, resulting in perfectly sharp profiles with a minimal cutting radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip area and cutting edge:\u003c\/strong\u003e The smooth back edge of the PCD diamond insert, combined with spacious chip flutes, prevents material from sticking and facilitates chip evacuation from the working area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow surface roughness of the shank:\u003c\/strong\u003e The shank has a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, preventing slippage of the end mill in the tool holder and counteracting wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Attention to static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of the PCD insert):\u003c\/strong\u003e The insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, notching, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444668932436,"sku":"DT2.12.015.12.0MR","price":138.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.12.015.12.0MR_DT2.12.015.12.0MR-102.jpg?v=1793967605"},{"product_id":"fresa-diamantada-recta-pcd-z2-d9-i21-l71-5-s10-h2-5-rh","title":"PCD straight diamond router bit Z2 D9 I21 L71,5 S10 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter Dual Blade DT2 – for Precise Finishing and Shaping\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue Index:\u003c\/strong\u003e\u0026nbsp;DT2.09.021.10.2MR\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDT2\u003c\/strong\u003e series equipped with two full PCD diamond blades H2.5 mm, designed for highly efficient shaping and finishing on overhead milling machines and CNC machining centres. The tool's construction comprises a stable body made of sintered carbide monolith HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of stiffness, while the precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively mitigates radial runout, protecting the spindle bearings and guaranteeing a perfect edge finish.\u003c\/p\u003e\u003ch3\u003eKey Properties and Technical Specification:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-Sharpened Cutting Edges (Ablation):\u003c\/strong\u003e The DIA blades have been finished using a laser beam, resulting in perfectly sharp profiles with a minimal cutting edge radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Area and Cutting Edge:\u003c\/strong\u003e The smoothed rear edge of the PCD diamond insert combined with extensive chip flutes prevents material build-up and facilitates chip evacuation from the work area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Grip Surface Roughness:\u003c\/strong\u003e Grip with a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from slipping in the tool holder and counters the wear of the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Attention to static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Insert):\u003c\/strong\u003e The insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling, grooving, and slotting operations.\u003c\/p\u003e\u003cp\u003eIt performs exceptionally well in processing materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444669161812,"sku":"DT2.09.021.10.2MR","price":132.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.09.021.10.2MR_DT2.09.021.10.2MR-110.jpg?v=1791281606"},{"product_id":"fresa-diamantada-recta-pcd-z2-d8-i15-l70-s8-h3-rh","title":"PCD straight diamond router bit Z2 D8 I15 L70 S8 H3 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter Dual-Edged DT2 – for Precision Finishing and Formatting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCatalogue Number:\u003c\/strong\u003e\u0026nbsp;DT2.08.015.08.0MR\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDT2\u003c\/strong\u003e series equipped with two full PCD diamond cutting edges H3 mm, designed for highly efficient formatting and finishing machining on overhead spindle milling machines and CNC machining centres. The tool's construction features a stable body made of sintered tungsten carbide HM with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e (or stainless steel), in which polycrystalline diamond inserts are embedded. The use of a hard alloy in the shank ensures a high level of rigidity, and the precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e effectively eliminates radial runout, protecting the spindle bearings and guaranteeing perfect edge finishing.\u003c\/p\u003e\u003ch3\u003eKey properties and technical specifications:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser-Sharpened Cutting Edges (Ablation):\u003c\/strong\u003e The DIA blades have been finished using a laser beam, enabling the achievement of perfectly sharp profiles with a minimum cutting edge radius of \u003cstrong\u003e15 µm\u003c\/strong\u003e and a surface completely free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Area and Cutting Edge:\u003c\/strong\u003e The smoothed rear edge of the PCD diamond insert, combined with ample chip flutes, prevents chip sticking and facilitates chip evacuation from the working area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Surface Roughness of the Shank:\u003c\/strong\u003e The shank with a roughness of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents slippage of the cutter in the tool holder and counteracts wear of the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing in Class G2.5:\u003c\/strong\u003e Care for static and dynamic balancing in accordance with ISO\/EN standards (class \u003cstrong\u003eG2.5\u003c\/strong\u003e) dampens vibrations and noise generated during operation at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of PCD Insert):\u003c\/strong\u003e Insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, and insert \u003cstrong\u003eH = 3.0 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, grooving, and slotting.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), mineral-acrylic materials (Corian®, HPL), plastics, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444669620564,"sku":"DT2.08.015.08.0MR","price":110.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT2.08.015.08.0MR_DT2.08.015.08.0MR-106.jpg?v=1791281607"},{"product_id":"fresa-diamantada-pcd-z1-1-d12-i45-l100-s12-h2-5-rh","title":"PCD diamond router bit Z1+1 D12 I45 L100 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond End Mill from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.045.12.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond end mill from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing work on CNC centres and overhead spindle mills. The tool's design is based on a diamond blade arranged on three spirals and a frontal insert made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the material being processed, while the high accuracy class of the grip \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and ensuring excellent edge finish quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, which allows for achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting plane free from micro-nicks.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with voluminous chip channels prevents workpiece sticking and facilitates rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill against rotation in the holder and eliminates the risk of taper wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) eliminates noise and reduces vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of the PCD insert):\u003c\/strong\u003e Depending on the height of the diamond blade used: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-times\u003c\/strong\u003e sharpening, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444695408980,"sku":"DTA.12.045.12.0SR","price":65.57,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.045.12.0SR_DTA.12.045.12.0SR-109.jpg?v=1791281735"},{"product_id":"fresa-diamantada-pcd-z1-1-d16-i45-l105-s16-h2-5-lh","title":"PCD diamond router bit Z1+1 D16 I45 L105 S16 H2,5 LH","description":"\u003ch2\u003eDiamond PCD cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.16.045.16.0SL\u003c\/p\u003e\u003cp\u003eIndustrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series designed for formatting and finishing processing on CNC centres and overhead milling machines. The tool design is based on a diamond blade arranged on three spirals and a frontal insert made of sintered carbide (HM). The blades are mounted on a body made of steel with increased hardness (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high gripping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is offered in right and left rotations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e DIA edge profiles are finished directly with a laser beam, achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting face free of micro-chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond insert combined with capacious chip channels prevents the workpiece from sticking and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shaft surface with a roughness index \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD insert):\u003c\/strong\u003e depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, peripheral milling and notching operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated particle boards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444695998804,"sku":"DTA.16.045.16.0SL","price":65.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.16.045.16.0SL_DTA.16.045.16.0SL-108.jpg?v=1791281738"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i35-l95-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D20 I35 L95 S20 H2,5 LH","description":"\u003ch2\u003eDiamond cutter PCD from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.20.035.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is intended for formatting and finishing processing on CNC centres and overhead spindle milling machines. The tool's design is based on a diamond blade arranged on three spirals and a frontal plate made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). Thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high accuracy class of the grip \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is offered in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical characteristics:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, which allows for achieving edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry area:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip channels prevents the sticking of the cut material and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the grip part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from spinning in the holder and eliminates the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and diminishes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSpecification of sharpening (height of PCD plate):\u003c\/strong\u003e depending on the height of the employed diamond blade: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows \u003cstrong\u003e2-times\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and scope of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling, and notching.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444696064340,"sku":"DTA.20.035.20.0SL","price":52.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.20.035.20.0SL_DTA.20.035.20.0SL-111.jpg?v=1791281742"},{"product_id":"fresa-diamantada-pcd-z2-1-d16-i35-l94-s16-h2-5-rh","title":"PCD diamond router bit Z2+1 D16 I35 L94 S16 H2,5 RH","description":"\u003ch2\u003ePCD diamond cutter from the DTN Z2+1 series – for finishing, nesting, and formatting processes\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTN.16.035.16.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTN\u003c\/strong\u003e group has been designed for specialised formatting, nesting, and precision finishing operations on overhead-spindle milling machines and CNC centres. The tool features a blade arrangement \u003cstrong\u003eZ2+1 -\u0026nbsp;\u003c\/strong\u003e\u0026nbsp;where polycrystalline diamond (PCD) inserts are placed on four cutting spirals, supported by a cemented carbide (HM) front insert. The cutter's body is made of high-hardness steel (\u003e 28 HRC). This construction enhances the efficient elimination of dust, while the ground shank with a tight tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e minimises radial runout, protecting the spindle bearings and ensuring excellent edge condition after machining.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2+1 geometry based on four spirals:\u003c\/strong\u003e A configuration that provides high cutting efficiency and an excellent standard of surface finish while maintaining great work stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the cutting edges are finished directly by a laser beam, allowing for edge radii as low as \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with spacious chip channels prevents the material from sticking and facilitates rapid dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in a stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrindability:\u003c\/strong\u003e depending on the height of the diamond insert used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 regrinds\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 regrinds\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 regrinds\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt works exceptionally well in processing materials such as: raw and laminated MDF boards, raw and laminated chipboards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444697080148,"sku":"DTN.16.035.16.0SR","price":103.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTN.16.035.16.0SR_DTN.16.035.16.0SR-105.jpg?v=1791281746"},{"product_id":"fresa-diamantada-pcd-z2-2-d12-i25-l78-s12-h2-5-rh","title":"PCD diamond router bit Z2+2 D12 I25 L78 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter from the DTN Z2+2 Series – for Finishing, Nesting, and Formatting Operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTN.12.025.12.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTN\u003c\/strong\u003e\u0026nbsp;group has been designed for specialised formatting, nesting, and precise finishing operations on overhead spindle milling machines and CNC centres. The tool features a \u003cstrong\u003eZ2+2\u0026nbsp;\u003c\/strong\u003eblade arrangement, with polycrystalline diamond (PCD) inserts placed on four cutting spirals, supported by a front insert made of sintered carbide (HM). The cutter's shaft is made of high-hardness steel (\u0026gt; 28 HRC). This design facilitates the free removal of dust, while the ground shank with a close tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting spindle bearings and ensuring an excellent edge condition after machining.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2+2 Geometry based on Four Spirals:\u003c\/strong\u003e A configuration that provides high cutting efficiency and an excellent finishing standard for the material's surface while maintaining great work stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Processing (Ablation):\u003c\/strong\u003e The blade profiles are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Cutting Edge Zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents material build-up and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank has a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, securing the cutter against rotation in the holder and eliminating the risk of wear on the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration Capability:\u003c\/strong\u003e Depending on the height of the diamond insert used: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 re-sharpenings\u003c\/strong\u003e, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variations of \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently when machining materials such as: raw and laminated MDF board, raw and laminated particle board, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444697571668,"sku":"DTN.12.025.12.0SR","price":78.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTN.12.025.12.0SR_DTN.12.025.12.0SR-110.jpg?v=1791281749"},{"product_id":"fresa-diamantada-pcd-z1-1-d20-i80-l138-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D20 I80 L138 S20 H2,5 LH","description":"\u003ch2\u003ePCD diamond milling cutter from the DTA series for finishing processing of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.20.080.20.0SL\u003c\/p\u003e\u003cp\u003eIndustrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series intended for formatting and finishing machining on CNC centres and overhead milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are mounted on a body made of high hardness steel (\u0026gt; 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The well-designed cutting edge geometry ensures stable guidance in the workpiece, while the high gripping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in both right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser machining of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly with a laser beam, which allows for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guarantees a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents adhesion of the cut material and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of wear at the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e Depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2-3 times\u003c\/strong\u003e sharpening, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3-4 times\u003c\/strong\u003e sharpening, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4-6 times\u003c\/strong\u003e sharpening.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and grooving.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444697899348,"sku":"DTA.20.080.20.0SL","price":168.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.20.080.20.0SL_DTA.20.080.20.0SL-111.jpg?v=1791281751"},{"product_id":"fresa-diamantada-pcd-z1-1-d18-i25-l80-s20-h2-5-lh","title":"PCD diamond router bit Z1+1 D18 I25 L80 S20 H2,5 LH","description":"\u003ch2\u003ePCD Diamond Milling Cutter from the DTA Series for Finishing Processing of Boards and Plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.18.025.20.0SL\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead spindle milling machines. The tool's design is based on a diamond blade arranged on three spirals and a frontal plate made of hard metal (HM). The blades are mounted on a body made of high hardness steel (\u0026gt; 28 HRC) or – in selected variants – from sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high precision class \u003cstrong\u003eH6\u003c\/strong\u003e limits radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is offered in right and left rotation.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The edges of the DIA blades are finished directly with a laser beam, allowing edge radii to be achieved at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from microchipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Grooves and Rake Face:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with ample chip channels prevents material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the tight class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specification (Height of the PCD Plate):\u003c\/strong\u003e depending on the height of the diamond blade used: a plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpenings\u003c\/strong\u003e, a plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for operations like cutting, contour milling, and mortising.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the machining of materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444703830356,"sku":"DTA.18.025.20.0SL","price":39.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.18.025.20.0SL_DTA.18.025.20.0SL-101.jpg?v=1791281757"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d6-i25-l60-s6-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D6 I25 L60 S6 RH Finishing","description":"\u003ch2\u003eTwo-flute Solid Carbide Finishing End Mill for Foams and Plastics – Neutral Chip Removal and Smooth Edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.06.025.060.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute end mill made from solid carbide (VHM) with simple blade geometry (neutral chip removal to the sides). The Z2 design is intended for precise finishing of foams, plastics, and composite panels. The straight cutting edges exert no vertical forces (neither pushing nor lifting), preventing deformation of soft materials and ensuring a smooth finish on both sides of the part. Polished chip channels reduce friction and prevent the sticking and melting of soft materials. The tool is dedicated to finishing cuts, edging, and grooving on CNC machining centres and overhead milling machines. The ground shank with an H6 tolerance eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute simple geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves:\u003c\/strong\u003e Smooth surface facilitates free chip removal, preventing the melting of plastics and sticking to the cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction ensures dimensional stability and a longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards allows for smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Range of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for finishing cutting, edging, and grooving operations of both soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in the machining of materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), and composites like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444709892436,"sku":"SY26.06.025.060.06R","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.06.025.060.06R_SY26.06.025.060.06R-108.jpg?v=1791281772"},{"product_id":"fresa-recto-para-nesting-vhm-z3-d6-i22-l76-s12-rh","title":"Nesting straight router bit VHM Z3 D6 I22 L76 S12 RH","description":"\u003ch2\u003eThree-blade VHM Straight Cutter XZ3 NESTING\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eXZ3.06.022.076.12R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial straight cutter made of solid carbide (VHM) from the \u003cstrong\u003eXZ3\u003c\/strong\u003e series with a simple chip ejection to the sides. Designed for clean machining during cutting and nesting on CNC machining centres. The construction is based on three straight carbide blades placed in a body made of steel with a hardness above 28 HRC, providing tool rigidity and eliminating deflection during cutting. The simple blade arrangement ensures a smooth edge finish without chipping on both sides of the workpiece. The ground shank in accuracy class H6 eliminates radial runout, protecting the machine's drive system and ensuring high process stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThree straight carbide blades (Z3):\u003c\/strong\u003e The triple cutting arrangement allows for fast operation while maintaining a smooth edge surface on both sides of the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSimple chip ejection to the sides:\u003c\/strong\u003e The design with lateral chip discharge prevents pushing or pulling fibers at the edges of the workpiece.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReinforced steel body (\u0026gt; 28 HRC):\u003c\/strong\u003e High structural rigidity of the body increases resistance to dynamic loads and vibrations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Balancing according to ISO standards guarantees stable and quiet operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and range of applications:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for efficient cutting and nesting operations on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: raw and laminated MDF boards, raw and laminated particle boards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444719427924,"sku":"XZ3.06.022.076.12R","price":26.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/XZ3.06.022.076.12R_XZ3.06.022.076.12R-105GU.jpg?v=1791281821"},{"product_id":"fresa-diamantada-pcd-z2-2-d20-i55-l113-s20-h2-5-rh","title":"PCD diamond router bit Z2+2 D20 I55 L113 S20 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter from the DTN Z2+2 Series – for Finishing, Nesting, and Formatting Operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTN.20.055.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTN\u003c\/strong\u003e\u0026nbsp;group has been designed for specialised formatting, nesting, and precise finishing operations on overhead spindle milling machines and CNC centres. The tool employs a blade arrangement of \u003cstrong\u003eZ2+2 -\u0026nbsp;\u003c\/strong\u003epolycrystalline diamond (PCD) tips distributed over four working spirals, supported by a front tip made of sintered carbide (HM). The cutter's body is constructed from high-hardness steel (\u003e 28 HRC). This design facilitates free dust removal, while the ground shank in a tight tolerance class of \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearings and ensuring excellent edge condition after machining.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2+2 Geometry based on Four Spirals:\u003c\/strong\u003e A configuration that provides high cutting efficiency and an excellent surface finish standard while maintaining great work stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Edge Treatment (Ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing for edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting face free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Flute and Rake Face:\u003c\/strong\u003e The smoothed rear part of the PCD diamond tip combined with capacious flutes prevents material from sticking and enhances rapid dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The shank surface has a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, securing the cutter against spinning in the holder and eliminating the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding Capability:\u003c\/strong\u003e Depending on the height of the diamond tip used: tip \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 regrinds\u003c\/strong\u003e, tip \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables a maximum of \u003cstrong\u003e2–3 regrinds\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for a maximum of \u003cstrong\u003e3–4 regrinds\u003c\/strong\u003e, while tips \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable regrinding up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for cutting, nesting, peripheral milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated MDF boards, raw and laminated chipboards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444719460692,"sku":"DTN.20.055.20.0SR","price":152.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTN.20.055.20.0SR_DTN.20.055.20_320a05ab-e02a-423a-acb0-e67d17ba03ff.jpg?v=1793969146"},{"product_id":"fresa-diamantada-recta-pcd-z2-1-d12-i15-l66-s12-h3-rh","title":"PCD straight diamond router bit Z2+1 D12 I15 L66 S12 H3 RH","description":"\u003ch2\u003ePCD diamond milling cutter with drilling blade DTS – for nesting and finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTS.12.015.12.0DR\u003c\/p\u003e\u003cp\u003eProfessional diamond milling cutter from the \u003cstrong\u003eDTS\u003c\/strong\u003e series, designed for advanced nesting, formatting, and finishing operations on CNC machining centres and overhead milling machines. The blade construction consists of two solid polycrystalline diamond plates arranged in a compression geometry (positive-negative) along with a front drilling blade (\u003cstrong\u003ePCD Z2+1 H3\u003c\/strong\u003e). The blades are mounted on a sintered carbide monolith body with a hardness of \u003cstrong\u003e93.8 HRA\u003c\/strong\u003e or – in selected versions – from the heavy alloy \u003cstrong\u003eDENSIMET®\u003c\/strong\u003e (a tungsten alloy that dampens vibrations during cutting). The compression layout protects the laminate from chipping edges from above and below, while the diamond front plate ensures smooth entry of the tool into the material in the Z-axis. The precise grip tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle and guaranteeing optimal machining quality.\u003c\/p\u003e\u003ch3\u003eStructural advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser edge treatment (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed back of the PCD diamond plate combined with spacious chip channels prevents clogging and facilitates rapid dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shaft surface with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing within G2.5 standards:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and decreases vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, while the variant with the plate \u003cstrong\u003eH = 3.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, peripheral milling, mortising, slotting, and plunging into the material.\u003c\/p\u003e\u003cp\u003eIt works excellently in the processing of materials such as: raw and laminated particle boards and MDF, raw and laminated plywood, glass and carbon fibre composites (GFRP \/ CFRP), HPL boards, aluminium, and fibre-cement boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444719984980,"sku":"DTS.12.015.12.0DR","price":161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTS.12.015.12.0DR_DTS.12.015.12.0DR-108.jpg?v=1791281823"},{"product_id":"fresa-diamantada-pcd-z1-1-d12-i45-l100-s12-h2-5-rh-1","title":"PCD diamond router bit Z1+1 D12 I45 L100 S12 H2,5 RH","description":"\u003ch2\u003ePCD diamond cutter from the DTA series for finishing machining of boards and plywood\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.045.12.0SRE\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter of the \u003cstrong\u003eDTA\u003c\/strong\u003e series is intended for formatting and finishing machining on CNC centres and overhead spindle milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front plate made of sintered carbide (HM). The blades are installed on a body made of high-hardness steel (\u003e 28 HRC) or – in selected variants – made of sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high grip accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is available in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly by laser beam, achieving edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-dents.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with spacious chip grooves prevents material sticking and facilitates rapid dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter against rotation in the holder and eliminates the risk of conical wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of the PCD plate):\u003c\/strong\u003e Depending on the height of the diamond blade used: the plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening cycles\u003c\/strong\u003e, the plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and range of application:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and notching.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444735287636,"sku":"DTA.12.045.12.0SRE","price":70.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.045.12.0SRE_DTA.12.045.12.0SRE-112.jpg?v=1791281858"},{"product_id":"fresa-diamantada-pcd-pro-z2-2-d12-i25-l76-s12-h2-5","title":"PCD diamond PRO router bit Z2+2 D12 I25 L76 S12 H2,5","description":"\u003ch2\u003ePCD diamond cutter double-edged DTL PRO – for nesting, formatting and finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTL.12.025.12.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the DTL\u003cstrong\u003e\u0026nbsp;PRO\u003c\/strong\u003e series has been designed for high-performance nesting, cutting, and precision finishing on CNC centres and overhead spindle milling machines. The tool features two fully diamond-edged blades arranged on four spirals with an increased axial angle. It is supported by a drilling insert made of polycrystalline diamond (PCD). The tool body is made of durable steel with enhanced hardness (\u003e 28 HRC) and has a specially optimised profile that facilitates rapid dust removal from the cutting area. In addition, the ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle bearing system and ensuring an excellent edge finish.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Z2+2 geometry and increased axial angle:\u003c\/strong\u003e Two fully diamond blades arranged on four spirals enable high cutting efficiency, a perfectly clean edge of the processed material, and effective chip ejection.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD drilling insert:\u003c\/strong\u003e The polycrystalline diamond blade on the front of the tool ensures clean, stable, and easy insertion of the cutter into the material along the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA blades are finished directly using a laser, allowing for edge radii at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and entry zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents material from sticking and facilitates quick dust removal from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the gripping part:\u003c\/strong\u003e The shank surface in class H6 with a roughness index \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balance in class G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimises noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReconditioning capability:\u003c\/strong\u003e Depending on the height of the diamond insert used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, peripheral milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt is ideal for processing materials such as raw and laminated MDF board, raw and laminated chipboard, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444752392532,"sku":"DTL.12.025.12.0SR","price":86.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTL.12.025.12.0SR_DTL.12.025.12.0SR-107.jpg?v=1791281929"},{"product_id":"fresa-recto-para-nesting-vhm-z3-d6-i22-l76-s12-rh-1","title":"Nesting straight router bit VHM Z3 D6 I22 L76 S12 RH","description":"\u003ch2\u003eThree-blade straight VHM XZ3 NESTING milling cutter\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eXZ3.06.022.076.12Rz\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial straight milling cutter made from solid carbide (VHM) from the \u003cstrong\u003eXZ3\u003c\/strong\u003e series with a simple chip removal design for side discharge. Designed for clean machining during cutting and nesting on CNC machining centres. The construction consists of three straight carbide blades placed in a body made of steel with a hardness above 28 HRC, ensuring tool rigidity and eliminating deflection during machining. The simple blade arrangement guarantees a smooth edge finish without chipping on both sides of the workpiece. The ground shank with an accuracy class of H6 eliminates radial runout, protecting the machine drive system and ensuring high process stability.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThree straight carbide blades (Z3):\u003c\/strong\u003e The triple cutting arrangement allows for fast work while maintaining a smooth edge surface on both sides of the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSimple side chip removal:\u003c\/strong\u003e The design with side chip evacuation prevents pressing or pulling fibres at the edges of the machined board.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReinforced steel body (\u003e 28 HRC):\u003c\/strong\u003e High structural rigidity of the body increases resistance to dynamic loads and vibrations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground surface of the shank prevents slipping in the tool holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing class G2.5:\u003c\/strong\u003e Balancing in accordance with ISO standards ensures stable and quiet operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and scope of use:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for efficient cutting operations and nesting technology on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: raw and laminated MDF boards, raw and laminated chipboards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444752589140,"sku":"XZ3.06.022.076.12Rz","price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/XZ3.06.022.076.12Rz_XZ3.06.022.076.12RZ-105.jpg?v=1794302448"},{"product_id":"fresa-diamantada-recta-pcd-z5-1-d20-i22-l100-s20-h3-rh","title":"PCD straight diamond router bit Z5+1 D20 I22 L100 S20 H3 RH","description":"\u003ch1\u003ePCD Straight Five-Blade Diamond Cutter\u003c\/h1\u003e\u003cp\u003eIndex: DT5.20.022.20.0SR\u003c\/p\u003e\u003cp\u003eHighly efficient five-blade diamond cutter from the \u003cstrong\u003eDT5\u003c\/strong\u003e series, equipped with polycrystalline diamond (PCD) blades. The tool is designed for extremely fast and precise cutting, shaping, flattening, grooving, and profiling of wood-based and composite materials on multi-axis CNC machining centres. The increased number of blades (Z5) allows for a significant boost in feed rates while maintaining perfect edge finish quality. The body made of cemented carbide with a hardness of 93.8 HRA or high-quality stainless steel guarantees maximum rigidity and dimensional stability under heavy loads. PCD blades arranged in negative or straight geometry eliminate the risk of chipping on laminate edges. The tool's design allows for multiple sharpening (2–4 times depending on the height of the diamond insert), which drastically reduces unit machining costs. The ground shank with an accuracy class of H6 protects against radial runout and safeguards the machine's drive system.\u003c\/p\u003e\u003ch3\u003eKey Technical Parameters and Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFive polycrystalline diamond (PCD) blades:\u003c\/strong\u003e Z5 geometry allows operation at ultra-high feed speeds while maintaining excellent smoothness of the machined material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReinforced body construction:\u003c\/strong\u003e Made of cemented carbide (93.8 HRA) or stainless steel effectively dampens vibrations and ensures full operational stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMultiple regeneration capability:\u003c\/strong\u003e PCD inserts with a height of H2.5 allow for 2–3 sharpening cycles, while a height of H3 enables 3–4 sharpening operations.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eVersatile machining capability:\u003c\/strong\u003e Suitable for efficient cutting, shaping, corner joints, grooving, and performing precise grooves.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOptimised shank roughness:\u003c\/strong\u003e Low surface roughness of the shank (Ra ≤ 0.3 µm) prevents slipping in the holder and protects the spindle taper.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balance in class G2.5:\u003c\/strong\u003e Static-dynamic balancing according to ISO\/EN standard (class G2.5) protects spindle bearings and ensures vibration-free operation at maximum speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication and Material Designation:\u003c\/h3\u003e\u003cp\u003eDedicated to high-volume industrial machining on multi-axis CNC centres and overhead spindle milling machines in the furniture industry and hole drilling.\u003c\/p\u003e\u003cp\u003eMachined materials: Raw and laminated MDF, raw and laminated particle board, cement-bonded fibreboards, composites with glass and carbon fibres, Corian®, HPL, raw and laminated plywood, and aluminium.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444754522452,"sku":"DT5.20.022.20.0SR","price":435.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DT5.20.022.20.0SR_DTS.20.022.20.0SR-109.jpg?v=1791281942"},{"product_id":"fresa-diamantada-pcd-z2-2-d12-i35-l94-s12-h2-5-rh","title":"PCD diamond router bit Z2+2 D12 I35 L94 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Milling Cutter from the DTN Z2+2 Series – for Finishing, Nesting and Formatting Operations\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTN.12.035.12.0DR\u003c\/p\u003e\u003cp\u003eThe industrial diamond milling cutter from the \u003cstrong\u003eDTN\u003c\/strong\u003e\u0026nbsp;group is designed for specialised formatting operations, nesting, and precision finishing of materials on overhead spindle milling machines and CNC centres. The tool features a blade arrangement \u003cstrong\u003eZ2+2 -\u0026nbsp;\u003c\/strong\u003e\u0026nbsp;with polycrystalline diamond (PCD) inserts arranged on four cutting spirals, supported by a front insert made of sintered carbide (HM). The cutter body is made of high-hardness steel (\u003e 28 HRC). This construction facilitates efficient dust removal, while the ground shank in a tight tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearings and ensuring excellent edge condition after machining.\u0026nbsp;\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eZ2+2 Geometry\u0026nbsp; based on four spirals:\u003c\/strong\u003e A configuration providing high cutting performance and excellent finishing standards of the material surface while maintaining great operational stability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly by a laser beam, achieving edge radii of about \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting surface free from micro-chips.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back part of the PCD diamond insert combined with capacious chip channels prevents material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface has a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e, preventing the cutter from rotating in the holder and eliminating the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high \u003cstrong\u003eG2.5\u003c\/strong\u003e class (according to ISO\/EN) reduces noise and mitigates vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration capability:\u003c\/strong\u003e depending on the height of the diamond insert used: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 sharpening\u003c\/strong\u003e operations, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e permits sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, versions \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e permit sharpening up to \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting, nesting, contour milling, and grooving operations.\u003c\/p\u003e\u003cp\u003eIt performs excellently in processing materials such as: raw and laminated MDF boards, raw and laminated chipboards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444762255700,"sku":"DTN.12.035.12.0DR","price":181.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTN.12.035.12.0DR_DTN.12.035.12.0DR-108_44487851-a01c-4c22-89eb-977bccb5b8a4.jpg?v=1794302460"},{"product_id":"fresa-diamantada-pcd-pro-z2-2-d18-i43-l105-s20-h2-5","title":"PCD diamond PRO router bit Z2+2 D18 I43 L105 S20 H2,5","description":"\u003ch2\u003ePCD Diamond End Mill DTL PRO – for nesting, formatting and finishing\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTL.18.043.20.0SR\u003c\/p\u003e\u003cp\u003eThe industrial diamond end mill from the DTL\u003cstrong\u003e\u0026nbsp;PRO\u003c\/strong\u003e series has been designed for high-performance nesting, cutting, and precision finishing on CNC machines and overhead milling machines. The tool features two full diamond cutting edges arranged on four spirals with an increased axial angle. It is supported by a cutting insert made of polycrystalline diamond (PCD). The body of the tool is made from durable steel with increased hardness (\u0026gt; 28 HRC) and has a specially optimised profile that facilitates quick dust removal from the cutting area. Additionally, the ground shank with precise tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle bearing system and ensuring an excellent edge finish standard.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eAdvanced Z2+2 geometry and increased axial angle:\u003c\/strong\u003e Two full diamond cutting edges arranged on four spirals allow for high cutting efficiency, a perfectly clean edge of the workpiece, and efficient chip evacuation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePCD cutting insert:\u003c\/strong\u003e The polycrystalline diamond blade on the front of the tool ensures clean, stable, and easy entry of the mill into the material along the Z-axis.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser processing of cutting edges (ablation):\u003c\/strong\u003e The profiles of the DIA cutting edges are finished directly using a laser, achieving edge radii of \u003cstrong\u003e15 µm\u003c\/strong\u003e and guaranteeing a cutting plane free from micro chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert, combined with capacious chip channels, prevents material from sticking and facilitates quick dust removal from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface in class H6 with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the mill from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in class G2.5:\u003c\/strong\u003e Certified static-dynamic balancing in class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) minimises noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegrinding capability:\u003c\/strong\u003e Depending on the height of the applied insert: an insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, an insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows for sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variations \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, nesting, peripheral milling, and routing.\u003c\/p\u003e\u003cp\u003eIt is ideally suited for the processing of materials such as raw and laminated MDF panels, raw and laminated particleboards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444769857876,"sku":"DTL.18.043.20.0SR","price":150.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTL.18.043.20.0SR_DTL.18.043.20.0SR-107_b2129244-6a11-47a8-95f2-eb2d96952741.jpg?v=1793967717"},{"product_id":"fresa-diamantada-pcd-z1-d12-7-i27-l81-5-s12-h2-5-rh","title":"PCD diamond router bit Z1 D12,7 I27 L81,5 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Router DTA for Finish Machining of Boards and Plywood with Bearing\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.027.12.BSR\u003c\/p\u003e\u003cp\u003eIndustrial diamond router of the \u003cstrong\u003eDTA\u003c\/strong\u003e series designed for formatting and finish machining on CNC centres and overhead routers. The tool's design is based on a diamond blade arranged on three spirals and a tungsten carbide (HM) front plate. The blades are mounted on a hardened steel body (\u003e 28 HRC) or – in selected variants – on sintered monolithic carbide (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the workpiece, while the high grip accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finish quality. The tool is available in both right-hand and left-hand rotations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTemplate guidance thanks to the lower bearing:\u0026nbsp;\u003c\/strong\u003eThe built-in guide bearing located at the front part of the router allows for precise shape copying according to a template without the risk of damaging the material edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser machining of cutting edges (ablation):\u003c\/strong\u003e The DIA blade profiles are finished directly with a laser beam, allowing edge radii to be achieved at the level of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting plane free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and insertion area:\u003c\/strong\u003e The smoothed rear part of the PCD diamond plate combined with capacious chip channels prevents the workpiece from sticking and facilitates quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The surface of the shank with a roughness index \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e secures the router against rotating in the holder and eliminates the risk of cone wear in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing in G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the stringent class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening specification (height of PCD plate):\u003c\/strong\u003e depending on the height of the diamond blade used: plate \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-fold\u003c\/strong\u003e sharpening, plate \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while plates \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e4–6 times.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended Use and Application Range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, contour milling, and mortising.\u003c\/p\u003e\u003cp\u003eIt performs excellently in machining materials such as raw and laminated chipboards, MDF boards, as well as raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444778246484,"sku":"DTA.12.027.12.BSR","price":60.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.027.12.BSR_DTA.12.027.12.BSR-111.jpg?v=1793972971"},{"product_id":"fresa-diamantada-pcd-z1-d12-7-i44-l99-5-s12-h2-5-rh","title":"PCD diamond router bit Z1 D12,7 I44 L99,5 S12 H2,5 RH","description":"\u003ch2\u003ePCD Diamond Cutter DTA for Finishing Processing of Panels and Plywood with Bearing\u0026nbsp;\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e\u0026nbsp;DTA.12.044.12.BSR\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eDTA\u003c\/strong\u003e series is designed for formatting and finishing processing on CNC centres and overhead spindle milling machines. The tool's design is based on a diamond blade arranged on three spirals and a front insert made of sintered carbide (HM). The blades are mounted on a body made of high-hardness steel (\u0026gt; 28 HRC) or – in selected variants – from a sintered carbide monolith (HM). The thoughtful geometry of the cutting edges ensures stable guidance in the processed material, while the high clamping accuracy class \u003cstrong\u003eH6\u003c\/strong\u003e reduces radial runout, protecting the spindle and guaranteeing excellent edge finishing quality. The tool is available in both right and left rotations.\u003c\/p\u003e\u003ch3\u003eDesign Advantages and Technical Properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTemplate Guidance Using a Bottom Bearing:\u0026nbsp;\u003c\/strong\u003eThe built-in guide bearing located at the front of the cutter enables precise copying of shapes according to the template without the risk of damaging the material edge.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser Treatment of Cutting Edges (Ablation):\u003c\/strong\u003e The profiles of the DIA blades are directly finished with a laser beam, allowing to achieve edge radii of around \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free of micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished Chip Flutes and Entry Zone:\u003c\/strong\u003e The smoothed rear part of the PCD diamond insert combined with capacious chip channels prevents sticking of the chip and facilitates quick removal of dust from the cutting zone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow Roughness of the Shank:\u003c\/strong\u003e The surface of the shank with a roughness indicator of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e protects the cutter from rotating in the holder and eliminates the risk of wear on the spindle cone.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic Balancing to G2.5 Standard:\u003c\/strong\u003e Certified static-dynamic balancing in the precise class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) negates noise and reduces vibrations generated at high speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSharpening Specifications (Height of PCD Insert):\u003c\/strong\u003e depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2 times\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e enables sharpening up to \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow for sharpening up to \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e enable sharpening up to \u003cstrong\u003e4–6 times.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003ePurpose and Scope of Use:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for cutting operations, peripheral milling and mortising.\u003c\/p\u003e\u003cp\u003eIt performs excellently in the processing of materials such as: raw and laminated chipboards, MDF boards, and raw and laminated plywood.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444778475860,"sku":"DTA.12.044.12.BSR","price":89.98,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/DTA.12.044.12.BSR_DTA.12.044.12.BSR-102_db8c268e-0295-4a16-baf9-fdcdb38ddc62.jpg?v=1794302463"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d6-i15-l60-s6-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D6 I15 L60 S6 RH Finishing","description":"\u003ch2\u003eTwo-flute VHM finishing end mill for foams and plastics – neutral chip ejection and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.06.015.060.06XR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe industrial two-flute end mill made from solid carbide (VHM) features a simple blade geometry (neutral chip ejection to the sides). The Z2 design is intended for precise finishing of foams, plastics, and composite sheets. The straight cutting edges do not exert vertical forces (neither pressing nor lifting), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. The polished flutes reduce friction and prevent sticking and melting of soft plastics. This tool is dedicated to finishing cuts, jointing, and grooving on CNC machining centres and cantilever milling machines. The ground shank in H6 tolerance eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eConstruction advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute simple geometry (Z2):\u003c\/strong\u003e A neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished flutes:\u003c\/strong\u003e The smooth surface facilitates the free removal of chips, preventing melting of plastics and build-up on the cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e A rigid construction ensures dimensional stability and longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow shank roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e The ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balance G2.5:\u003c\/strong\u003e Compliance with ISO standards enables smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eNaDia protective coating:\u003c\/strong\u003e A specialised protective layer with a very low friction coefficient (0.01–0.05) and high hardness (3650 HV 0.05) protects the cutting edge from wear, prevents chip build-up, and significantly extends tool life.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for finishing cuts, jointing, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed for machining materials such as: technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444784275796,"sku":"SY26.06.015.060.06XR","price":24.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.06.015.060.06XR_912.06.015.060.06XRI-109_51e1fe6f-086d-4107-80f3-7f46b65cd6f9.jpg?v=1793969494"},{"product_id":"fresa-recto-para-espumas-y-plasticos-vhm-z2-d6-i42-l90-s6-rh-acabado","title":"straight router bit for foam \u0026 plastics VHM Z2 D6 I42 L90 S6 RH Finishing","description":"\u003ch2\u003eTwo-flute VHM finishing cutter for foams and plastics – neutral chip removal and smooth edge\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eSY26.06.042.090.06R\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIndustrial two-flute straight cutter made of solid carbide (VHM) with simple blade geometry (neutral chip removal to the sides). The Z2 design has been created for precise finishing of foams, plastics and composite panels. The straight cutting edges do not exert vertical forces (either pressing or lifting), preventing deformation of soft materials and ensuring a smooth finish on both sides of the workpiece. Polished flute channels reduce friction and prevent sticking and melting of soft materials. The tool is dedicated to finishing cutting, jointing, and grooving on CNC machining centres and overhead milling machines. The ground shank in class H6 eliminates radial runout and protects the spindle from vibrations.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTwo-flute straight geometry (Z2):\u003c\/strong\u003e Neutral cutting direction eliminates pressure and lifting of the material, protecting delicate structures from deformation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished flute grooves:\u003c\/strong\u003e Smooth surface facilitates free removal of chips, preventing melting of materials and sticking of cutting edges.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSolid carbide (VHM):\u003c\/strong\u003e Rigid construction guarantees dimensional stability and longer tool life during continuous operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow grip roughness (Ra ≤ 0.3 µm):\u003c\/strong\u003e Ground shank prevents slipping in the holder and protects the spindle taper from wear.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing G2.5:\u003c\/strong\u003e Compliance with ISO standards enables smooth, vibration-free operation at high rotational speeds.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is intended for finishing cutting, jointing, and grooving of soft and hard plastic materials on CNC machines.\u003c\/p\u003e\u003cp\u003eUsed in machining materials such as technical foams (PE, PUR), plastics (PMMA, PVC, PE), as well as composite materials like CORIAN® and HPL.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444786569556,"sku":"SY26.06.042.090.06R","price":37.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/SY26.06.042.090.06R_912.06.042.090.06RPI-107.jpg?v=1791282051"}],"url":"https:\/\/es.ita.tools\/en\/collections\/straight-router-bits.oembed?page=13","provider":"ITA TOOLS","version":"1.0","type":"link"}