{"product_id":"fresa-diamantada-pcd-para-planear-z2-2-d40-i14-l75-s20-h4-rh-taladrante","title":"PCD diamond planing router bit Z2+2 D40 I14 L75 S20 H4 RH plunging","description":"\u003ch2\u003ePCD Diamond Cutter \u003cstrong\u003eFDP\u003c\/strong\u003e – for leveling surfaces and grooving\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eIndex:\u003c\/strong\u003e \u003cstrong\u003eFDP.40.014.20.0SR\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe industrial diamond cutter from the \u003cstrong\u003eFDP\u003c\/strong\u003e series is designed for precise surface levelling (planing) and grooving on CNC centres and overhead milling machines. The advanced design of the tool uses a system comprising \u003cstrong\u003e2+2\u003c\/strong\u003e full polycrystalline diamond \u003cstrong\u003eH4\u003c\/strong\u003e blades, ensuring high cutting efficiency and perfect geometry of the machined surface. The body made of special stainless steel with increased hardness (\u003e 28 HRC) features very good stiffness and resistance to loads. The ground shank in tolerance class \u003cstrong\u003eH6\u003c\/strong\u003e eliminates radial runout, protecting the spindle bearing system and ensuring an excellent edge finishing standard.\u003c\/p\u003e\u003ch3\u003eDesign advantages and technical properties:\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDedicated design for planing and grooving:\u003c\/strong\u003e A wide working diameter and stable blade arrangement allow for fast and damage-free leveling of large board surfaces or performing clean grooves.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDurable stainless steel body (\u003e 28 HRC):\u003c\/strong\u003e The construction made of high hardness steel guarantees high dimensional stability and advanced vibration dampening capabilities during operation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLaser treatment of cutting edges (ablation):\u003c\/strong\u003e DIA blade profiles are finished directly with a laser beam, achieving edge radii in the range of \u003cstrong\u003e15 µm\u003c\/strong\u003e and ensuring a cutting surface free from micro-chipping.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolished chip grooves and cutting zone:\u003c\/strong\u003e The smoothed back of the PCD diamond insert combined with capacious chip channels prevents the sticking of chips and facilitates quick removal of dust from the cutting area.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow roughness of the shank:\u003c\/strong\u003e The shank surface with a roughness index of \u003cstrong\u003eRa ≤ 0.3 µm\u003c\/strong\u003e prevents the cutter from rotating in the holder and eliminates the risk of wear to the cone in the spindle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDynamic balancing to G2.5 standard:\u003c\/strong\u003e Certified static-dynamic balancing in the high-class \u003cstrong\u003eG2.5\u003c\/strong\u003e (according to ISO\/EN) reduces noise and minimizes vibrations generated at the highest speeds.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFeed rate and maximum cutting depth parameters:\u003c\/strong\u003e Depending on the tool diameter, the following working parameters are recommended:Diameters Ø 20–40 mm: feed rate 6–12 m\/min, maximum speed 18,000 RPM, maximum planing depth 6 mm; Diameters Ø 50–60 mm: feed rate 6–12 m\/min, maximum speed 16,000 RPM, maximum planing depth 4 mm; Diameter Ø 80 mm: feed rate 6–12 m\/min, maximum speed 14,000 RPM, maximum planing depth 2 mm.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRegeneration possibility:\u003c\/strong\u003e depending on the height of the diamond blade used: insert \u003cstrong\u003eH = 2.0 mm\u003c\/strong\u003e allows for \u003cstrong\u003e2-time\u003c\/strong\u003e sharpening, insert \u003cstrong\u003eH = 2.5 mm\u003c\/strong\u003e allows sharpening a maximum of \u003cstrong\u003e2–3 times\u003c\/strong\u003e, variants \u003cstrong\u003eH = 3.0 mm \/ H = 3.5 mm\u003c\/strong\u003e allow sharpening a maximum of \u003cstrong\u003e3–4 times\u003c\/strong\u003e, while inserts \u003cstrong\u003eH = 4.0 mm \/ H = 4.5 mm\u003c\/strong\u003e allow sharpening a maximum of \u003cstrong\u003e4–6 times\u003c\/strong\u003e (and up to \u003cstrong\u003e5–6 times\u003c\/strong\u003e for height H6).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eIntended use and application range:\u003c\/h3\u003e\u003cp\u003eThe tool is designed for surface leveling operations (planing tables and materials) and grooving.\u003c\/p\u003e\u003cp\u003eIt works excellently in the machining of materials such as raw and laminated MDF boards and raw and laminated particle boards.\u003c\/p\u003e","brand":"ITA TOOLS","offers":[{"title":"Default Title","offer_id":57444756390228,"sku":"FDP.40.014.20.0SR","price":225.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1080\/4183\/0740\/files\/FDP.40.014.20.0SR_FDP.40.014.20.0SR-112_ff525d8b-8bad-4313-8f0d-324f4822293a.jpg?v=1794302455","url":"https:\/\/es.ita.tools\/en\/products\/fresa-diamantada-pcd-para-planear-z2-2-d40-i14-l75-s20-h4-rh-taladrante","provider":"ITA TOOLS","version":"1.0","type":"link"}