Compression router bit for nesting Finishing VHM Z2+2 D10 I22 L70 S10 RH Platinum

End mill HM (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.10.022.070.10PR

Industrial end mill made from a special grade of sintered carbide, dedicated to nesting from the X90 series, with a compression (positive-negative) design and a factory Platinum coating. The tool is designed for high-efficiency cutting processing, nesting technology cutting, as well as edging and trimming operations on CNC machining centres. Two opposing spiral twist directions push the material against the core of the board from both sides, eliminating the risk of tearing on the upper and lower edges. Ground shank in H6 accuracy class eliminates radial runout, protecting the drive system and ensuring high process stability.

Structural advantages and technical properties:

• Compression geometry (Positive-Negative): The counter-rotating arrangement of the blades pushes the chips down from the top edge and up from the bottom, pressing the laminate to the core and guaranteeing clean edges.
• Sintered carbide dedicated to nesting (HM (coated)): Selected grade of carbide with increased toughness and rigidity prevents micro-chipping during continuous board processing.
• Protective Platinum coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces sticking of the material being machined and significantly extends tool life in difficult materials.
• Low shank roughness (Ra ≤ 0.3 µm): The ground shank surface eliminates the risk of slipping in the chuck and prevents wear of the spindle cone.
• Dynamic balancing in G2.5 class: Balancing according to ISO standards reduces vibrations and dampens operation at maximum rotational speeds.

Intended use and application range:

The tool is intended for cutting operations, efficient nesting technology cutting, as well as edging and trimming operations on CNC machining centres.

It performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, soft and hardwood, and HPL boards.