Compression router bit for nesting Finishing VHM Z2+2 D10 I35 L80 S10 RH Platinum

HM finishing spiral end mill (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.10.035.080.10PR

Industrial spiral end mill made of a special grade of carbide dedicated to nesting from the X90 series, with a compression (positive-negative) design and factory Platinum coating. The tool has been designed for high-performance cutting operations, nesting technology cutting, as well as edge bonding and aligning on CNC machining centres. Two counter-rotating spiral flutes press the material against both sides of the core board, eliminating the risk of tear-outs on the top and bottom edges. The ground shank in H6 accuracy class eliminates radial runout, protecting the drive system and ensuring high process stability.

Construction advantages and technical properties:

• Compression geometry (Positive-Negative): The counter-rotating arrangement of the blades pushes the chips down from the upper edge and up from the lower, pressing the laminate against the core and guaranteeing clean edges.
• Carbide dedicated to nesting (HM (coated)): Selected grade of carbide with increased impact resistance and stiffness prevents micro-chipping during continuous processing of boards.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low coefficient of friction (0.02). Reduces material adherence and significantly extends tool life in difficult materials.
• Low shank roughness (Ra ≤ 0.3 µm): The ground surface of the shank eliminates the risk of slipping in the holder and prevents wear on the spindle taper.
• Dynamic balancing in class G2.5: Balancing in accordance with ISO standards reduces vibrations and silences operation at maximum rotational speeds.

Application and range of use:

The tool is intended for cutting operations, efficient nesting technology cutting, as well as bonding and edge aligning on CNC machining centres.

It performs excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, soft and hardwood, and HPL boards.