Compression router bit for nesting Finishing VHM Z2+2 D12 I25 L80 S12 RH Platinum

Finishing spiral cutter HM (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.12.025.080.12PR

Industrial spiral cutter made of a special grade of cemented carbide dedicated to nesting from the X90 series, with a compression (positive-negative) design and factory Platinum coating. The tool is designed for high-performance cutting operations, nesting technology, as well as edge jointing and alignment on CNC machining centres. Two opposing spiral twist directions press the material against the core of the board from both sides, eliminating the risk of tear-outs on the upper and lower edges. The ground shank in accuracy class H6 minimizes radial run-out, protecting the drive system and ensuring high stability of the process.

Design advantages and technical properties:

• Compression geometry (Positive-Negative): The opposing arrangement of the blades pushes chips down from the upper edge and up from the lower edge, pressing the laminate to the core and guaranteeing clean edges.
• Cemented carbide dedicated to nesting (HM (coated)): A selected grade of carbide with increased impact resistance and rigidity prevents micro-chipping during continuous board processing.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces material sticking and significantly extends tool life in difficult materials.
• Low shank roughness (Ra ≤ 0.3 µm): The ground shank surface eliminates the risk of slipping in the chuck and prevents wear of the spindle cone.
• Dynamic balancing in class G2.5: Balancing according to ISO standards reduces vibrations and muffles operation at maximum rotational speeds.

Intended use and scope of application:

The tool is intended for cutting operations, efficient nesting technology, as well as edge jointing and alignment on CNC machining centres.

It performs excellently in the processing of materials such as: raw and laminated MDF board, raw and laminated particle board, raw and laminated plywood, soft and hard solid wood, and HPL boards.