Compression router bit for nesting Finishing VHM Z2+2 D12 I35 L80 S12 RH Platinum

Finishing spiral cutter HM (with coating) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.12.035.080.12PR

Industrial spiral cutter made of a special grade of sintered carbide dedicated to nesting from the X90 series, with a compression design (positive-negative) and a factory coating of Platinum. The tool has been designed for high-performance cutting operations, cutting in nesting technology, as well as seam and edge trimming on CNC machining centres. Two opposing spiral twist directions press the material against the plate core from both sides, eliminating the risk of chipping at the upper and lower edges. The ground shank in class H6 eliminates radial runout, protecting the drive system and ensuring high process stability.

Design advantages and technical properties:

• Compression geometry (Positive-Negative): Opposing blade arrangement pushes chips from the upper edge down and from the lower edge up, pressing the laminate to the core and guaranteeing clean edges.
• Sintered carbide dedicated to nesting (HM (with coating)): Selected grade of carbide with increased impact resistance and stiffness prevents micro-chipping during continuous plate processing.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces workpiece adhesion and significantly extends tool life in difficult materials.
• Low grip roughness (Ra ≤ 0.3 µm): Ground surface of the shank eliminates the risk of slipping in the chuck and prevents wear of the spindle cone.
• Dynamic balancing in class G2.5: Balancing in accordance with ISO standards reduces vibrations and quiets operation at maximum rotational speeds.

Intended use and application range:

The tool is intended for cutting operations, efficient cutting in nesting technology, as well as seam and edge trimming on CNC machining centres.

It works perfectly in processing materials such as: raw and laminated MDF boards, raw and laminated particle boards, raw and laminated plywood, soft and hard solid wood, and HPL boards.