Compression router bit for nesting Finishing VHM Z2+2 D16 I52 L110 S16 RH Platinum

HM finishing spiral cutter (with coating) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.16.052.110.16PR

Industrial spiral cutter made from a special grade of sintered carbide dedicated to nesting from the X90 series, with a compression (positive-negative) design and a factory Platinum coating. The tool is designed for high-performance cutting, nesting technology cutting, as well as edge jointing and trimming on CNC machining centres. The two opposing spiral twist directions press the material against the core of the sheet from both sides, eliminating the risk of tears on the upper and lower edges. The ground shank in class H6 accuracy eliminates radial runout, protecting the drive system and ensuring high process stability.

Construction advantages and technical properties:

• Compression geometry (Positive-Negative): The opposing position of the blades pushes the chip down from the upper edge and up from the lower, pressing the laminate against the core and guaranteeing clean edges.
• Sintered carbide dedicated to nesting (HM (with coating)): A selected grade of carbide with increased impact resistance and rigidity prevents micro-chipping during continuous processing of sheets.
• Platinum protective coating: An advanced PVD coating with a thickness of 1–4 µm and a hardness of 3000 HV (HV 0.05) with a very low coefficient of friction (0.02). This reduces material adhesion and significantly extends tool life in difficult materials.
• Low roughness of the shank (Ra ≤ 0.3 µm): The ground surface of the shank eliminates the risk of slipping in the chuck and prevents wear of the spindle taper.
• Dynamic balancing in class G2.5: Balancing in accordance with ISO standards reduces vibrations and quietens operation at maximum rotational speeds.

Intended use and application range:

The tool is designed for cutting operations, efficient cutting in nesting technology, as well as edge jointing and trimming on CNC machining centres.

It performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, soft and hard solid wood, and HPL boards.