Compression router bit for nesting Finishing VHM Z2+2 D9,52 I22,22 L76,2 S9,52 RH Platinum

HM finishing spiral cutter (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.95.222.762.95PR

Industrial spiral cutter made from a special grade of cemented carbide dedicated to nesting from the X90 series, with a compression (positive-negative) design and a factory Platinum coating. The tool is designed for high-performance cutting operations, cutting using nesting technology, as well as edge banding and leveling on CNC machining centres. Two counter-rotating spiral directions press the material against the plate core from both sides, eliminating the risk of tearing at the top and bottom edges. The ground shank in accuracy class H6 eliminates radial runout, protecting the drive system and ensuring high stability of the process.

Structural advantages and technical properties:

• Compression geometry (Positive-Negative): The counter-rotating blade arrangement pushes chips down from the upper edge and up from the lower, pressing the laminate against the core and guaranteeing clean edges.
• Cemented carbide dedicated to nesting (HM (coated)): Selected grade of carbide with increased toughness and rigidity prevents micro-chipping during continuous processing of boards.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low coefficient of friction (0.02). Reduces adhesion of the machined material and significantly extends tool life in difficult materials.
• Low roughness of the shank (Ra ≤ 0.3 µm): Ground shank surface eliminates the risk of slipping in the holder and prevents wear of the spindle taper.
• Dynamic balancing in class G2.5: Balancing in accordance with ISO standards reduces vibrations and quiets operation at maximum rotational speeds.

Purpose and scope of application:

The tool is intended for cutting operations, efficient cutting using nesting technology, as well as edge banding and leveling on CNC machining centres.

It performs excellently in machining materials such as: raw and laminated MDF board, raw and laminated particle board, raw and laminated plywood, soft and hardwood, as well as HPL boards.