Compression router bit for nesting Finishing VHM Z3+3 D10 I35 L80 S10 RH Platinum

Finishing spiral cutter HM (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.10.035.080.10PR3

Industrial spiral cutter made of a special grade of sintered carbide dedicated to nesting from the X90 series, with a compression (positive-negative) construction and factory-installed Platinum coating. The tool is designed for high-performance cutting, nesting technology cutting, as well as edging and smoothing operations on CNC machining centres. Two counter-rotating spiral directions press the material against the core of the board from both sides, eliminating the risk of chipping on the upper and lower edges. The ground shank with an accuracy class of H6 mitigates radial run-out, protecting the drive system and ensuring high process stability.

Design advantages and technical properties:

• Compression geometry (Positive-Negative): The counter-positioning of the blades pushes chips down from the upper edge and up from the lower edge, pressing the laminate against the core and guaranteeing clean edges.
• Sintered carbide dedicated to nesting (HM (coated)): Selected grade of carbide with increased impact resistance and stiffness prevents micro-chipping during continuous processing of panels.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces material adhesion and significantly extends tool life in challenging materials.
• Low shank roughness (Ra ≤ 0.3 µm): The ground surface of the shank eliminates the risk of slippage in the holder and prevents wear of the spindle cone.
• Dynamic balancing in class G2.5: Balancing compliant with ISO standards reduces vibrations and silences operation at maximum rotational speeds.

Application and scope of use:

The tool is intended for cutting operations, efficient nesting technology cutting, as well as edging and smoothing operations on CNC machining centres.

It performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated particle board, raw and laminated plywood, soft and hard solid wood, and HPL boards.