Compression router bit for nesting Finishing VHM Z3+3 D12 I25 L80 S12 RH Platinum

HM finishing spiral end mill (with coating) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.12.025.080.12PR3

Industrial spiral end mill made of a special grade of sintered carbide dedicated to nesting from the X90 series, with a compression construction (positive-negative) with factory Platinum coating. The tool is designed for high-efficiency cutting, nesting technology cutting, as well as edge jointing and alignment on CNC machining centres. Two opposite spiral twist directions press the material against the core of the board from both sides, eliminating the risk of chipping on the upper and lower edges. The ground shank in accuracy class H6 eliminates radial runout, protecting the drive system and ensuring high process stability.

Structural advantages and technical properties:

• Compression geometry (Positive-Negative): Opposite positioning of the cutting edges pushes the chips from the upper edge downwards and from the lower edge upwards, pressing the laminate to the core and ensuring clean edges.
• Sintered carbide dedicated to nesting (HM (with coating)): Selected grade of carbide with increased impact strength and rigidity prevents micro-chipping during continuous processing of boards.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces workpiece material adhesion and significantly extends tool life in difficult materials.
• Low shank roughness (Ra ≤ 0.3 µm): Ground surface of the shank eliminates the risk of slipping in the holder and prevents wear of the spindle taper.
• Dynamic balancing in class G2.5: Balancing in accordance with ISO standards reduces vibrations and muffles operation at maximum rotational speeds.

Intended use and application range:

The tool is intended for cutting operations, efficient nesting technology cutting, as well as edge jointing and alignment on CNC machining centres.

It works perfectly for machining materials such as: raw and laminated MDF boards, raw and laminated particle boards, raw and laminated plywood, soft and hard solid wood, and HPL boards.