Compression router bit for nesting Finishing VHM Z3+3 D12 I35 L80 S12 RH Platinum

HM finishing spiral cutter (coated) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.12.035.080.12PR3

Industrial spiral cutter made of a special grade of cemented carbide dedicated to nesting from the X90 series, with a compression design (positive-negative) featuring a factory Platinum coating. The tool is designed for high-performance cutting, nesting technology, as well as joining and edge levelling on CNC machining centres. Two opposing spiral twist directions press the material against the board core from both sides, eliminating the risk of tearing on the upper and lower edges. The ground shank in class H6 eliminates radial run-out, protecting the drive system and ensuring high stability of the process.

Design advantages and technical properties:

• Compression geometry (Positive-Negative): The opposing arrangement of the blades pushes the chips down from the upper edge and up from the lower edge, pressing the laminate against the core and guaranteeing clean edges.
• Cemented carbide dedicated to nesting (HM (coated)): A selected grade of carbide with increased impact resistance and rigidity prevents micro-chipping during continuous processing of boards.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces the adherence of the processed material and significantly extends tool life in difficult materials.
• Low roughness of the shank (Ra ≤ 0.3 µm): The ground surface of the shank eliminates the risk of slipping in the holder and prevents wear of the spindle cone.
• Dynamic balancing in class G2.5: Balancing in accordance with ISO standards reduces vibrations and silences operation at maximum rotational speeds.

Purpose and scope of application:

The tool is intended for cutting operations, efficient nesting technology cutting, as well as joining and edge levelling on CNC machining centres.

It performs excellently in processing materials such as: raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, soft and hard solid wood, and HPL boards.