Compression router bit for nesting Finishing VHM Z3+3 D9,52 I22,22 L76,2 S9,52 RH Platinum

HM spiral finishing end mill (with coating) compression for nesting Platinum from the X90 series - uncompromising durability and clean edges

Index: X90.95.222.762.95PR3

Industrial spiral end mill made of a special grade of sintered carbide dedicated to nesting from the X90 series, with a compression design (positive-negative) and a factory Platinum coating. The tool has been designed for high-efficiency cutting, nesting technology cutting, as well as edging and alignment on CNC machining centres. Two opposite twisting directions of the spirals press the material against the core of the board from both sides, eliminating the risk of tear-out on the upper and lower edges. The ground shank in accuracy class H6 reduces radial run-out, protecting the drive system and ensuring high stability of the process.

Construction advantages and technical properties:

• Compression geometry (Positive-Negative): The opposing blade arrangement pushes the chips from the upper edge down and from the lower edge up, pressing the laminate to the core and guaranteeing clean edges.
• Sintered carbide dedicated to nesting (HM (with coating)): Selected grade of carbide with increased impact resistance and stiffness prevents micro-chipping during continuous processing of boards.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces workpiece adhesion and significantly extends tool life in difficult materials.
• Low roughness of the shank (Ra ≤ 0.3 µm): The ground surface of the shank eliminates the risk of slipping in the holder and prevents wear on the spindle cone.
• Dynamic balancing in class G2.5: Balancing according to ISO standards reduces vibration and quiets operation at maximum rotational speeds.

Purpose and scope of application:

The tool is intended for cutting operations, efficient nesting technology cutting, as well as edging and alignment on CNC machining centres.

It works excellently in processing materials such as: raw and laminated MDF board, raw and laminated chipboard, raw and laminated plywood, soft and hard solid wood, and HPL boards.