Compression router bit for nesting Roughing VHM Z2+2 D10 I35 L80 S10 RH Platinum

HM Compression Spiral Cutter (coated) for Nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.10.035.080.10PRz

Industrial spiral cutter made from a special grade of sintered carbide dedicated to nesting from the X90 series, with a compression (positive-negative) design and factory Platinum coating. The tool has been designed for high-performance cutting, nesting technology cutting, as well as edge bonding and alignment on CNC machining centres. Two counter-rotating spiral directions press the material against the core of the panel from both sides, eliminating the risk of chipping on the upper and lower edges. The ground shank in class H6 accuracy eliminates radial runout, protecting the drive system and ensuring high process stability.

Structural advantages and technical properties:

• Compression Geometry (Positive-Negative): The counter-positioning of the blades pushes shavings down from the upper edge and up from the lower edge, pressing the laminate against the core and guaranteeing clean edges.
• Sintered carbide dedicated to nesting (HM (coated)): A selected grade of carbide with increased impact resistance and rigidity prevents micro-chipping during continuous processing of panels.
• Platinum protective coating: Advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low coefficient of friction (0.02). Reduces the sticking of the machined material and significantly extends the tool's life when processing difficult materials.
• Low grip roughness (Ra ≤ 0.3 µm): The ground surface of the shank eliminates the risk of slipping in the holder and prevents wear on the spindle cone.
• Dynamic balancing in class G2.5: Balancing in accordance with ISO standards reduces vibrations and quietens operation at maximum rotational speeds.

Purpose and range of use:

The tool is designed for cutting operations, efficient nesting technology cutting, as well as edge bonding and alignment on CNC machining centres.

It performs excellently in the processing of materials such as: raw and laminated MDF boards, raw and laminated chipboards, raw and laminated plywood, soft and hard solid wood, and HPL boards.