Compression router bit for nesting Roughing VHM Z2+2 D8 I35 L80 S8 RH Platinum

HM roughing spiral end mill (with coating) compression for nesting Platinum from the X90 series – uncompromising durability and clean edges

Index: X90.08.035.080.08PRz

Industrial spiral end mill made from a special grade of sintered carbide dedicated to nesting from the X90 series, featuring a compression design (positive-negative) with a factory Platinum coating. The tool has been designed for high-performance cutting, nesting technology cutting, as well as jointing and edge trimming on CNC machining centres. Two opposing spiral twist directions press the material against the core of the panel from both sides, eliminating the risk of tear-out on the upper and lower edges. The ground shank in class H6 accuracy eliminates radial runout, protecting the drive system and ensuring high process stability.

Structural advantages and technical properties:

• Compression geometry (Positive-Negative): The opposing arrangement of the blades pushes the chip down from the upper edge and up from the lower edge, pressing the laminate against the core and guaranteeing clean edges.
• Sintered carbide dedicated to nesting (HM (with coating)): A selected grade of carbide with increased impact toughness and stiffness prevents micro-chipping during continuous processing of panels.
• Platinum protective coating: An advanced PVD coating with a thickness of 1–4 µm and hardness of 3000 HV (HV 0.05) with a very low friction coefficient (0.02). Reduces adhesion of the worked material and significantly extends the tool's lifespan in difficult materials.
• Low roughness of the shank (Ra ≤ 0.3 µm): The ground surface of the shank eliminates the risk of slippage in the holder and prevents wear of the spindle cone.
• Dynamic balancing in class G2.5: Balancing in accordance with ISO standards reduces vibrations and quietens operation at maximum rotational speeds.

Intended purpose and scope of application:

The tool is intended for cutting operations, efficient cutting in nesting technology, as well as jointing and edge trimming on CNC machining centres.

It performs excellently in the machining of materials such as: raw and laminated MDF board, raw and laminated particleboard, raw and laminated plywood, soft and hard solid wood, and HPL boards.