PCD diamond router bit Z3+1 D16 I35 L97 S16 H4 LH pos./neg.

PCD Diamond Cutter Three-Edge DTE.TURBO – for finishing, formatting, and grooving

Index: DTE.16.035.16.0SL

The industrial diamond cutter from the DTE.TURBO series is designed for high-performance formatting, cutting, and finishing on CNC centres and overhead spindle milling machines. The tool's structure features three full edges made of polycrystalline diamond H4 and a diamond tip, which allows for efficient and stable axial penetration into the material. The body, made from selected stainless steel, offers high stiffness and resistance to thermal and mechanical loads. The ground shank in precise tolerance class H6 eliminates radial run-out, protecting the spindle bearing and ensuring an excellent standard of edge finish. The cutter is available in right and left variants.

Design advantages and technical properties:

• Design: The arrangement of three cutting edges made of polycrystalline diamond mounted on a stainless steel body guarantees high cutting efficiency, exceptional stability, and clean material edges.
• PCD Diamond Tip: The tool's face equipped with a PCD tip facilitates free, smooth, and stable penetration of the cutter in the Z-axis.
• Laser Treatment of Cutting Edges (Ablation): The DIA blade profiles are finished directly by a laser beam, achieving edge radii levels of 15 µm and ensuring a cutting surface free from micro-chipping.
• Polished Chip Flutes and Rake Face: The smoothed back part of the PCD diamond tip combined with deep chip channels prevents build-up of chips and enhances quick removal of dust from the cutting zone.
• Low Roughness of the Shank: The shaft surface with a roughness index of Ra ≤ 0.3 µm secures the cutter against rotating in the holder and eliminates the risk of wearing the cone in the spindle.
• Dynamic Balancing to G2.5 Standard: Certified static-dynamic balancing in the high G2.5 class (according to ISO/EN) reduces noise and vibration generated at high speeds.
• Regeneration Possibility: depending on the height of the diamond tip used: the H = 2.0 mm tip allows for 2 sharpening, the H = 2.5 mm tip enables sharpening a maximum of 2–3 times, the H = 3.0 mm / H = 3.5 mm variants allow for sharpening a maximum of 3–4 times, while the H = 4.0 mm / H = 4.5 mm tips allow for sharpening a maximum of 4–6 times.

Purpose and Scope of Use:

The tool is designed for cutting, peripheral milling (formatting), and grooving operations.

It performs excellently in processing materials such as raw and laminated MDF boards, raw and laminated chipboards, as well as raw and laminated plywood.