Spiral router bit Finishing VHM Z3 D16 I55 L110 S16 RH positive NaDia

Three-flute VHM spiral end mill 16x55 mm from the SC01 series – perfect edge quality and high machining efficiency

Index: SC01.16.055.110.16XR

High-performance spiral end mill made from solid sintered carbide (VHM) from the SC01 line, designed for tasks involving precise cutting, formatting, and finishing on vertical machining centres and CNC mills. The tool employs a three-flute spiral geometry in a Z3 configuration with a positive arrangement, which facilitates effective chip removal upwards. The use of high-quality micro-grain carbide ensures high resistance to abrasive wear and significantly extends the cutting edge's lifespan. The ground shank in tolerance class H6 eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent standard of finish on the machined material. 

Design advantages and technical properties:

• Finishing geometry Z3 (upward chip removal): Three cutting edges ensure very high cutting efficiency, allow operation at higher feed rates, provide an ideal standard of edge finish and facilitate effective upward chip removal.
• Premium sintered carbide monolith (VHM): Rigid, monolithic construction prevents deformation of the mill during operation under high force, allowing for tight dimensional tolerances.
• Possibility of PVD coating application: The option to apply protective coatings (including TiSiN or PLATINIUM) can significantly extend edge life, reduce friction, and protect against overheating.
• Low roughness of the shank: The shank surface with a roughness indicator of Ra ≤ 0.3 µm prevents the mill from spinning in the holder and eliminates the risk of wear to the cone in the spindle.
• Dynamic balancing to G2.5 standard: Certified static-dynamic balancing in a strict G2.5 class (according to ISO/EN) reduces noise and vibrations generated at high speeds (up to 18,000 RPM).

Intended use and range of application:

The tool is intended for cutting operations, peripheral milling, and finishing edge machining.

It excels in machining materials such as: soft and hard wood, raw MDF board, plywood, and raw particle board.