PCD diamond V-grooving profile router bit Z2 D33/3 I15 L71,5 S20 H4 a45° RH

PCD profiling diamond cutter FDH – for beveling edges

Index: FDH.33.015.20.0SR

The industrial PCD profiling diamond cutter of the FDH series is designed for precise beveling of edges on CNC centres and overhead milling machines. The advanced tool design features Z2 full edges made of polycrystalline diamond H4 shaped at an angle for edge beveling. The body made of special stainless steel with increased hardness (> 28 HRC) ensures very good stiffness and advanced vibration damping capabilities during profiling. The ground shank in tolerance class H6 eliminates radial runout, protecting the spindle bearing system and guaranteeing an excellent edge finishing standard.

Design advantages and technical properties:

• Precise edge beveling: Angled cutting edges made of polycrystalline diamond allow for clean and repeatable bevels without chipping on the edges of the material.
• Durable stainless steel body (> 28 HRC): The body features high mechanical and thermal resistance during intensive industrial work.
• Laser treatment of cutting edges (ablation): The DIA blade profiles are finished directly by a laser beam, achieving edge radii of approximately 15 µm and guaranteeing a cutting surface free from micro-chipping.
• Polished chip grooves and cutting zone: The smoothed rear part of the PCD diamond plate combined with spacious chip channels prevents material from sticking and facilitates quick removal of dust from the cutting zone.
• Low roughness of the clamping part: The surface of the shank with a roughness index of Ra ≤ 0.3 µm protects the cutter from rotating in the holder and eliminates the risk of wearing the cone in the spindle.
• Dynamic balancing in G2.5 standard: Certified static-dynamic balancing in the stringent G2.5 class (according to ISO/EN) minimizes noise and reduces vibrations generated at the highest speeds.
• Regeneration capability: depending on the thickness of the applied diamond edge: plate H = 2.0 mm allows for 2-times sharpening, plate H = 2.5 mm enables sharpening a maximum of 2–3 times, variants H = 3.0 mm / H = 3.5 mm allow sharpening a maximum of 3–4 times, while plates H = 4.0 mm / H = 4.5 mm allow sharpening a maximum of 4–6 times.

Purpose and application range:

The tool is intended for profiling and beveling edge operations.

It works perfectly in the processing of materials such as: raw and laminated MDF boards and raw and laminated chipboards.